Paper ID: 2301.02585

Combined mechanistic and machine learning method for construction of oil reservoir permeability map consistent with well test measurements

E. A. Kanin, A. A. Garipova, S. A. Boronin, V. V. Vanovsky, A. L. Vainshtein, A. A. Afanasyev, A. A. Osiptsov, E. V. Burnaev

We propose a new method for construction of the absolute permeability map consistent with the interpreted results of well logging and well test measurements in oil reservoirs. Nadaraya-Watson kernel regression is used to approximate two-dimensional spatial distribution of the rock permeability. Parameters of the kernel regression are tuned by solving the optimization problem in which, for each well placed in an oil reservoir, we minimize the difference between the actual and predicted values of (i) absolute permeability at the well location (from well logging); (ii) absolute integral permeability of the domain around the well and (iii) skin factor (from well tests). Inverse problem is solved via multiple solutions to forward problems, in which we estimate the integral permeability of reservoir surrounding a well and the skin factor by the surrogate model. The last one is developed using an artificial neural network trained on the physics-based synthetic dataset generated using the procedure comprising the numerical simulation of bottomhole pressure decline curve in reservoir simulator followed by its interpretation using a semi-analytical reservoir model. The developed method for reservoir permeability map construction is applied to the available reservoir model (Egg Model) with highly heterogeneous permeability distribution due to the presence of highly-permeable channels. We showed that the constructed permeability map is hydrodynamically similar to the original one. Numerical simulations of production in the reservoir with constructed and original permeability maps are quantitatively similar in terms of the pore pressure and fluid saturations distribution at the end of the simulation period. Moreover, we obtained an good match between the obtained results of numerical simulations in terms of the flow rates and total volumes of produced oil, water and injected water.

Submitted: Dec 20, 2022