Paper ID: 2211.07515

A Novel Design and Improvement of 15-Bar Assembly Tensegrity Robotics Structure

Yunyi Chu

While the ultimate goal is to produce a tensegrity more than 6 struts, e.g. a 15-bar tensegrity, past experience has demonstrated that we must first develop an innovative system that will facilitate the assembly of a general n-bar tensegrity. To be successful, we believe the development of the new assembly methodology must encompass not only the design of the clamping system but also the design of the tensegrity itself, including the struts, the springs and the spring-to-strut connectors. We therefore propose to develop the 15-bar in two phases: Phase I will be the development of an innovative assembly method, and Phase II will focus on the design and manufacture of a 15-bar tensegrity, with a new strut design probably being part of this. Longer term goals will be aimed at repackaging the wireless electronics on the new struts and adding encoders to control the phase of the motors shafts.

Submitted: Sep 30, 2022