M-MIMO is one of the crucial technologies for increasing spectral and energy efficiency of wireless networks. Most of the current works assume that M-MIMO arrays are equipped with a linear front end. However, ongoing efforts to make wireless networks more energy-efficient push the hardware to the limits, where its nonlinear behavior appears. This is especially a common problem for the multicarrier systems, e.g., OFDM used in 4G, 5G, and possibly also in 6G, which is characterized by a high Peak-to-Average Power Ratio. While the impact of a nonlinear Power Amplifier (PA) on an OFDM signal is well characterized, it is a relatively new topic for the M-MIMO OFDM systems. Most of the recent works either neglect nonlinear effects or utilize simplified models proper for Rayleigh or LoS radio channel models. In this paper, we first theoretically characterize the nonlinear distortion in the M-MIMO system under commonly used radio channel models. Then, utilizing 3D-Ray Tracing (3D-RT) software, we demonstrate that these models are not very accurate. Instead, we propose two models: a statistical one and an ML-based one using 3D-RT results. The proposed statistical model utilizes the Generalized Extreme Value (GEV) distribution to model Signal to Distortion Ratio (SDR) for victim users, receiving nonlinear distortion, e.g., as interference from neighboring cells. The proposed ML model aims to predict SDR for a scheduled user (receiving nonlinear distortion along with the desired signal), based on the spatial characteristics of the radio channel and the operation point of each PA feeding at the M-MIMO antenna array. The predicted SDR can then be used to perform PA-aware per-user power allocation. The results show about 12% median gain in user throughput achieved by the proposed ML-based power allocation scheme over the state-of-the-art, fixed operating point scheme.
Semantic communications aim to enhance transmission efficiency by jointly optimizing source coding, channel coding, and modulation. While prior research has demonstrated promising performance in simulations, real-world implementations often face significant challenges, including noise variability and nonlinear distortions, leading to performance gaps. This article investigates these challenges in a multiple-input multiple-output (MIMO) and orthogonal frequency-division multiplexing (OFDM)-based semantic communication system, focusing on the practical impacts of power amplifier (PA) nonlinearity and peak-to-average power ratio (PAPR) variations. Our analysis identifies frequency selectivity of the actual channel as a critical factor in performance degradation and demonstrates that targeted mitigation strategies can enable semantic systems to approach theoretical performance. By addressing key limitations in existing designs, we provide actionable insights for advancing semantic communications in practical wireless environments. This work establishes a foundation for bridging the gap between theoretical models and real-world deployment, highlighting essential considerations for system design and optimization.
Wireless networks support multi-user (MU) communication with multiple-input multiple-output (MIMO) and orthogonal frequency-division multiple access (OFDMA) technologies. In the joint MU-MIMO-OFDMA-enabled transmission mode, network throughput can be significantly increased by effectively utilizing the multi-channel resources to schedule numerous wireless users/stations (STAs) simultaneously. In this paper, we study ways to optimize the user scheduling and resource allocation (SRA) for the UL scheduled access (UL-SA) of a joint MU-MIMO-OFDMA-enabled wireless local area network (WLAN). In particular, we propose a multi-agent (MA) framework that utilizes an openly available pretrained small/medium-sized Language Model (xLM) to perform SRA for the UL-SA. To facilitate autonomous SRA using our proposed technique, we introduce the AI-assisted Wireless Systems Engineering and Research (WiSER) platform. We evaluate the performance of MAxLM-optimized SRA for network scenarios with a varying number of STAs and antenna settings on the WLAN Access Point. Numerical results confirm that our proposed technique achieves higher UL-SA throughput than the benchmark techniques.
Power amplifier (PA) nonlinearity and memory effects significantly limit the spectral compliance, reliability, and energy efficiency of communication systems. To address this, we propose a transfer-learning-enabled, fully digital transceiver-cooperative method for amplitude-phase-time block modulation (APTBM)-based nonlinear single-carrier transmission under adjacent channel leakage ratio (ACLR) constraints. At the transmitter, iterative clipping and filtering (ICAF) and static digital pre-distortion (SDPD) act jointly to reduce signal peaks and suppress spectral regrowth without requiring wideband feedback. At the receiver, the inherent amplitude-phase constraints of APTBM provide weakly supervised prior knowledge for offline inverse-model pretraining, which is followed by the online few-shot adaptation of a lightweight digital post-distortion (DPoD) network. Subsequently, a cascaded DPoD and clipping-noise cancellation scheme systematically compensates for residual distortions induced by both the PA and ICAF. Simulation and measurement results demonstrate reliable transmission at an input back-off of approximately 2 dB under a 30-dBc ACLR constraint. Furthermore, the proposed DPoD approach significantly reduces online training time and computational overhead, delivering a performance gain of over 2 dB compared to conventional learning-based DPoD schemes.