Full Feature Spiking Neural Network Simulation on Micro-Controllers for Neuromorphic Applications at the Edge

Spiking Neural Networks (SNNs) have gained significant attention in edge computing due to their low power consumption and computational efficiency. However, existing implementations either use conventional System on Chip (SoC) architectures that suffer from memory-processor bottlenecks, or large-scale neuromorphic hardware that is inefficient and wasteful for small-scale SNN applications. This work presents SNAP-V, a RISC-V-based neuromorphic SoC with two accelerator variants: Cerebra-S (bus-based) and Cerebra-H (Network-on-Chip (NoC)-based) which are optimized for small-scale SNN inference, integrating a RISC-V core for management tasks, with both accelerators featuring parallel processing nodes and distributed memory. Experimental results show close agreement between software and hardware inference, with an average accuracy deviation of 2.62% across multiple network configurations, and an average synaptic energy of 1.05 pJ per synaptic operation (SOP) in 45 nm CMOS technology. These results show that the proposed solution enables accurate, energy-efficient SNN inference suitable for real-time edge applications.

Energy-efficient neuromorphic computing at the edge requires simulation tools that can capture the non-ideal behavior of mixed-signal spiking neural network (SNN) hardware while supporting system-level design exploration. This work presents an open-source hardware-aware simulation framework for mixed-signal SNNs that enables comparative analysis across neuron, synapse and architecture choices. The framework supports multiple neuron models, including Leaky Integrate-and-Fire (LIF), Hodgkin-Huxley (HH) and Axon-Hillock (AH), together with non-volatile analog synapses based on floating-gate transistors and ReRAM devices. By incorporating device-level nonlinearities directly into PyTorch-based training and inference, the tool enables optimization of physical synaptic parameters rather than idealized abstract weights. The framework is evaluated on standard neuromorphic benchmarks, including N-MNIST, DVS Gesture and Spiking Heidelberg Digits (SHD). For each model dataset configuration, it reports classification accuracy together with hardware-oriented metrics such as silicon area, power consumption and quantization sensitivity. These capabilities enable cross-layer design space exploration and help identify neuron-synapse configurations that best satisfy application-specific constraints on accuracy, energy efficiency, area and hardware fidelity.

Spiking Neural Networks (SNNs) offer a promising solution for energy-efficient edge intelligence; however, their hardware deployment is constrained by memory overhead, inefficient scaling operations, and limited parallelism. This work proposes L-SPINE, a low-precision SIMD-enabled spiking neural compute engine for efficient edge inference. The architecture features a unified multi-precision datapath supporting 2-bit, 4-bit, and 8-bit operations, leveraging a multiplier-less shift-add model for neuron dynamics and synaptic accumulation. Implemented on an AMD VC707 FPGA, the proposed neuron requires only 459 LUTs and 408 FFs, achieving a critical delay of 0.39 ns and 4.2 mW power. At the system level, L-SPINE achieves 46.37K LUTs, 30.4K FFs, 2.38 ms latency, and 0.54 W power. Compared to CPU and GPU platforms, it reduces inference latency from seconds to milliseconds, achieving an up to three orders-of-magnitude improvement in energy efficiency. Quantisation analysis shows that INT2/INT4 configurations significantly reduce memory footprint with minimal accuracy loss. These results establish L-SPINE as a scalable and efficient solution for real-time edge SNN deployment.