A Multiplication-Free Spike-Time Learning Algorithm and its Efficient FPGA Implementation for On-Chip SNN Training

Deploying adaptive intelligence at the edge remains challenging due to the high computational and energy cost of training neural models. Spiking Neural Networks (SNNs) offer a promising alternative, but enabling on-device learning requires hardware-algorithm co-design. This paper presents SPIKER-LL, an FPGA-based SNN accelerator that extends the open-source Spiker+ inference architecture with efficient support for the STSF local learning rule. Through targeted microarchitectural extensions, SPIKER-LL performs inference and online learning with minimal overhead. Across MNIST, F-MNIST, and DIGITS, it achieves up to 93% accuracy, sub-millisecond latency, and less than 0.1 mJ per inference, while remaining DSP-free and highly scalable for edge-FPGA deployments.

Spiking Neural Networks (SNNs) provide a naturally temporal machine-learning framework. Their neurons maintain an internal state and propagate information through discrete spikes, enabling low-latency temporal inference. Although SNNs are often associated with asynchronous neuromorphic processors, many scientific real-time inference systems rely on conventional synchronous field-programmable gate arrays (FPGAs) and high-level synthesis (HLS) workflows. In this paper we present an extension of hls4ml that enables clock-driven deployment of SNNs trained in pytorch onto FPGA firmware. We demonstrate the workflow using a dense quantised SNN trained on the Heidelberg Spiking Digits dataset where it achieves inference latencies of approximately $34μ$s. We validate the generated design through software reference comparisons, HLS C simulation, HLS synthesis, export, and Vivado synthesis reports. This work opens up the hls4ml toolkit to neuromorphic computing, allowing streamlined optimisation, synthesis, and deployment of SNN models for real-time inference.

Spiking Neural Networks (SNNs) can reduce energy consumption compared to conventional Artificial Neural Networks (ANNs) when spiking activity is sparse and the neuron model is hardware-friendly. However, biologically faithful models are often too costly to implement on FPGAs, whereas very simple models (e.g., IR/LIF) sacrifice part of the neuronal dynamics. In this work, we present an FPGA accelerator for an SNN using Spiking Recurrent Cell (SRC) neurons, providing a trade-off between biological plausibility and hardware cost. We propose a set of mathematical simplifications that remove costly unary operators (\textit{tanh}, \textit{exp}) and avoid floating-point arithmetic through scaling and piecewise-defined approximations. The complete network is implemented in VHDL and validated using spiking traces derived from the MNIST dataset. The weight matrices computed off-line are stored directly in LUT-registers without any adaptation. This demonstrates the robustness of SRC cells. Experiments were conducted on an Artix-7 XC7A200T clocked at 100 MHz. The reference implementation achieves 96.31% accuracy with a 220-image spiking trace and a processing time of 1.7424 ms per digit. We then investigate accuracy/energy trade-offs by reducing the spiking trace length and quantizing synaptic weights down to 4 bits, achieving 93.32% accuracy at 0.55 mJ per digit (55 images, 5-bit weights) and 92.89% at 0.45 mJ (44 images, 4-bit weights). These results show that SRC-based SNNs can deliver competitive performance with reduced energy consumption, while preserving richer neuronal dynamics than standard LIF/IR models.