Efficient Sensor Fusion for Gesture Recognition on Resource-Constrained Devices

Smart eyewear enables unobtrusive, context-aware interaction through multimodal sensors and on-device intelligence, but is severely limited by power, memory, and compute constraints in a compact form factor. Open-hardware platforms supporting event-based vision and embedded ML at this scale are rare. This work introduces an open-source smart glasses platform for rapid prototyping of novel sensors and algorithms. Its modular design uses a flexible FPC interposer to support both event-based and frame-based cameras without full PCB redesign. A hardware-software co-designed power management system combines a configurable PMIC with event-driven wake-up via an nRF5340 coordinator, keeping the GAP9 RISC-V SoC powered down between inferences. The prototype achieves up to 11.5 hours of continuous on-device ML from a 200 mAh battery. As a demonstration, an egocentric hand gesture recognition pipeline was evaluated on the LynX dataset using polarity-separated event histograms from a Prophesee GENX320 camera. R(2+1)D achieved the best cross-subject accuracy of 83.94% (macro F1 = 0.781) under leave-two-subjects-out validation, with 78.3 ms end-to-end inference latency on the GAP9. Temporal augmentation and removal of ambiguous classes provided the largest gains (+8.9 pp). All hardware designs, firmware, and models are released open source.

High-density electromyography (HD-EMG) has emerged as a powerful modality for decoding fine-grained neuromuscular activity, enabling real-time neural-machine interfaces (NMIs) for applications such as prosthetic control, rehabilitation, and augmented interaction. While deep learning approaches such as convolutional neural networks (CNNs)have demonstrated high classification accuracy for EMG-based gesture recognition, their deployment on embedded hardware remains a major challenge due to computational and memory constraints. This paper presents NeuroEdge, a real-time HD EMG-based NMI system that performs gesture recognition entirely on resource-constrained microcontrollers. The system features two custom-designed modules: the HD-EMG StreamBridge, a wireless communication interface that streams raw HD-EMG data from a Quattrocento amplifier to an ESP32 microcontroller; and the EdgeDL Inference Engine, a lightweight deep learning framework executing on a Sony Spresense microcontroller. A compact 1-dimensional CNN optimized for embedded inference processes, sliding windows of EMG data in real time. Data streaming and inference are pipelined and synchronized through an architecture that utilizes Direct Memory Access (DMA) for data transfer and Serial Peripheral Interface (SPI) burst communication between the ESP32 and Spresense, ensuring low-latency performance. Experimental results show that NeuroEdge achieves a real-time classification accuracy of 90% across seven hand gestures, with a total average latency of 83 ms using 192 channels of HD-EMG recorded from the forearm. Our system demonstrates the feasibility of deploying complex HD-EMG-based gesture recognition on microcontroller-based edge devices, bridging the gap between high-resolution biosignal acquisition and deep learning-based embedded inference for next-generation NMIs.

Low-resolution infrared (IR) array sensors represent an interesting solution for privacy-preserving human sensing in embedded systems. In this letter, we describe a smart multi-pixel IR sensor integrating a 16$\times$16 thermal MOSFET (TMOS) array and a RISC-V microcontroller extended with low-precision SIMD instructions, capable of on-device learning and continual adaptation for pose and gesture recognition tasks under tight memory and power constraints ($<$32kB on-chip memory, $\approx$1.5mW). To avoid the memory overheads of backpropagation and replay buffers, we adopt a prototype-based Nearest Class Mean (NCM) classifier in which a simple Convolutional Neural Network (CNN) encoder is trained and quantized offline, while class prototypes are stored and updated on the device in streaming mode. With experiments on two datasets, we show that this approach yields accuracy on par with a conventional classifier, with negligible latency overheads in both the classification and the prototype update ($<$0.29% considering both phases), effectively enabling online adaptation of the perception framework.