Authors: Peng Li, Xihua Zou, Jia Ye, Wei Pan, Lianshan Yan
Organizations: Center for Information Photonics and Communications, School of Information Science and Technology, Southwest Jiaotong University, Chengdu 611756, China · Key Laboratory of Photonic-Electronic Integration and Communication-Sensing Convergence, Southwest Jiaotong University, Chengdu 611756, China
Abstract
As a rapidly emerging interdisciplinary field that intrinsically integrates microwave and photonics, microwave photonics (MWP) provides disruptive solutions to overcome the fundamental bandwidth of conventional electronic systems. By exploiting the inherently ultra-wide bandwidth and low-loss characteristics of photonic technologies, MWP enables the generation, transmission, processing, and detection of microwave, millimeter-wave, and terahertz signals. Representative breakthroughs include fully photonic microwave radar systems, photonic analog-to-digital converters with bandwidth up to 320 GHz, and photonic wireless communication systems achieving data rate as high as 616 Gbit/s. Meanwhile, the rapid growth of artificial intelligence (AI) is reshaping scientific research, engineering, and daily life in unprecedented ways, such as AI for science/engineering and AI co-scientist/assistant. Correspondingly, AI is profoundly reshaping MWP in all aspects, ranging from signal generation, transmission to signal processing and detection. AI has revolutionized the design, simulation, fabrication, testing, deployment, and maintenance of MWP systems, delivering autonomous operation and exceptional efficiency beyond traditional systems. Motivated by these developments, this Review Paper provides the first comprehensive overview of AI-enabled MWP, systematically summarizing the state-of-the-art advances and presenting insights for both the academic community and the broader public.
Traditional microwave filter design typically relies on iterative parameter tuning and predefined topologies, which limits design space and increases development time. This study uses a deep learning approach combining convolutional neural networks with genetic algorithms to automate pixelated microwave filter synthesis. To validate the approach experimentally, both S-parameter and spatial electric-field measurements were analyzed. The synthesized low-pass filter demonstrated excellent agreement between simulated and measured performance, achieving a 7 GHz passband with over 20 dB suppression beyond 9.5 GHz. Electro-optical measurements, for the first time, revealed electric field patterns that resemble coupled transmission-lines or stub structures, providing insight into the emergent characteristics of AI-generated designs.
Millimeter-wave (mmWave) networks are highly susceptible to line-of-sight (LoS) blockages. Vision-aided wireless communications (VAWC) enable proactive handovers (PHO) to mitigate such blockages; however, PHO becomes challenging when no nearby base station (BS) is available. In such cases, reconfigurable intelligent surfaces (RIS) can be used to restore connectivity. To ensure timely PHO, the RIS configuration time must be taken into account, as the large number of RIS elements can limit responsiveness in time-sensitive scenarios. This work proposes a novel RIS-assisted PHO approach that optimizes the number of allocated RIS elements to balance signal processing complexity and link quality under handover timing constraints, making the RIS-assisted link more energy-efficient. An optimization problem based on particle swarm optimization (PSO) is formulated to determine the optimal end-to-end RIS link setup that runs offline to bypass latency constraints. Results show that reducing the number of RIS elements by 12% leads to a 10% decrease in dissipated energy without compromising the signal-to-noise ratio (SNR). Moreover, the RIS-assisted link achieves a 15--30 dB improvement in blocked regions while maintaining accurate PHO timing.
Over-the-Air Federated Learning (AirFL) is an emerging paradigm that tightly integrates wireless signal processing and distributed machine learning to enable scalable AI at the network edge. By exploiting wireless superposition over a shared multiple-access channel, AirFL turns simultaneous transmissions of local model updates into an analog aggregate at the receiver, thereby reducing communication latency, bandwidth usage, and energy consumption in wireless aggregation domains. This article develops a design-oriented tutorial view of analog AirFL. We organize existing schemes according to the signal-processing mechanism used to enable AirFL aggregation: transmitter-side channel compensation and power control, receiver-side equalization and high-dimensional processing, or learning-aware aggregation weighting. This viewpoint leads to three representative classes -- CSIT-aware, blind, and weighted AirFL -- and clarifies their assumptions, performance tradeoffs, complexity, and deployment limitations. We further discuss synchronization, digital and hybrid analog-digital realization, and open research directions for integrating AirFL into practical wireless edge-AI systems.
Seyed Mohammad Azimi-Abarghouyi, Carlo Fischione, Kaibin Huang