cs.LGMay 25, 2026

JacQuant: STE-Free Quantization-Aware Training via Learned Jacobian Surrogates

Authors: Kai YiVignesh VivekrajaHarshit KhaitanSteven Li

Organizations: Meta AI

Abstract

Quantization-aware training (QAT) is widely deployed but typically relies on the Straight-Through Estimator (STE), which passes gradients through non-differentiable quantizers by fiat. This often makes training brittle near bin boundaries and weakly aligned with the actual behavior of the low-precision model. We introduce JacQuant, a QAT framework that learns a lightweight surrogate of the model's local sensitivity to parameter changes and uses it to stabilize and accelerate training within standard variance-reduced optimizers. The surrogate is inexpensive (diagonal or block-diagonal), data-driven, and compatible with common weight and activation quantizers. On code-preserving training phases, we prove convergence for non-convex objectives and obtain linear rates under a PL condition, and we relate the learned sensitivity to end-to-end output fidelity via a simple calibration argument. Across LLM benchmarks at 2\leq 2 bits, JacQuant consistently reaches higher accuracy than STE-based QAT, and the runtime analyses on various models show that the added cost remains negligible under practical group sizes. The method is drop-in and requires no changes to the forward quantizers; our empirical claims are scoped to ultra-low-bit LLM QAT.

Explore similar work

Jun 8, 2026cs.LG

Understanding Quantization-Aware Training: Gradients at Quantized Weights Bias to the Low-Loss Basin

Post-training quantization (PTQ) converts a trained full-precision model into low-bit weights without task-level retraining, while quantization-aware training (QAT) incorporates quantization into the training loop. Although PTQ is efficient and often accurate at moderate bitwidths, it can fail sharply at aggressive bitwidths; QAT is more expensive but can often recover the lost accuracy. We propose a unified geometric framework that explains both PTQ failure and QAT recovery. We model full-precision training as following a low-loss \emph{river} inside a wider \emph{valley}: a normal neighborhood of the river forms a nearly flat \emph{basin}, while leaving this basin incurs a sharp loss increase. When the quantization grid is comparable to the basin width, local PTQ objectives, including rounding and Hessian-based second-order reconstruction, can select a high-loss deployed quantized point outside the basin even when nearby low-loss quantized points exist. In this regime, straight-through-estimator-based QAT has a useful bias: it evaluates gradients at the deployed quantized weights while updating latent full-precision weights, causing the gradient to sense the valley wall and acquire an inward component that steers subsequent quantized iterates back into the basin. We formalize this mechanism through a local landscape model, construct a geometric PTQ failure mode, and prove finite-time QAT recovery under local quantizer-compatibility assumptions. Experiments across vision and language models under multiple neural-network quantization schemes corroborate the predicted basin-crossing failure of PTQ and the corresponding recovery mechanism of QAT.
Hanyang Li, Jianhao Ma, Ying Cui
May 17, 2026cs.LG

WinQ: Accelerating Quantization-Aware Training of Language Models Around Saddle Points

Quantization-aware training (QAT) is widely adopted to quantize language models by training full-precision weights using gradients from the quantized model. The main bottleneck is its slow convergence and early performance plateau, particularly below 4-bit-widths. While this problem has been observed in prior work, its precise cause remains unclear. In this paper, we analyze the convergence of QAT by estimating the spectrum of the loss-surface Hessians. We find that the weights converge to flat regions around saddle points, where a large fraction of the Hessian eigenvalues are both positive and negative. During training, an increasing fraction of Hessian eigenvalues concentrates around zero, whose magnitude decreases. At lower bit-widths, the magnitude of eigenvalues in the Hessian spectrum is significantly smaller. To mitigate these issues, we propose an algorithm called WinQ to accelerate QAT, which involves: (1) periodically resetting weights to the linear interpolation of full-precision and quantized weights, reducing the distance to the quantization grid and increasing eigenvalue magnitude, and (2) computing gradients of noise-injected weights to regularize the Hessian. Extensive experiments show that WinQ accelerates QAT by up to 4 times across various quantization methods and models. Under the same training cost, WinQ improves state-of-the-art sub-4-bit quantization by up to 8.8%. These results are consistent across 16 settings with different language models, quantization methods, and bit widths.
Dongyue Li, Zechun Liu, Kai Yi +6
Aug 30, 2026cs.LG

A Target-Centric Survey of Quantization-Aware Training

The rapid development of LLMs incurs prohibitive memory footprints and intensive computational demands. Quantization-Aware Training (QAT) techniques have emerged as a promising solution to address these challenges by explicitly simulating quantization effects during model training, yielding low-bit models that achieve accuracy comparable to their full-precision counterparts. In this work, we provide a target-centric survey of QAT, aimed at clarifying both its theoretical foundations and its evolving implementation landscape. We systematically review existing QAT methods through a target-centric taxonomy and synthesize cross-target differences in error characteristics, numerical formats, and strategy transferability. We further summarize QAT evaluation paradigms and discuss challenges in optimization and deployment, outlining potential directions for future research.
Jiamin Song, Mengjie Zhao, Zijing Wang +6