This study presents a comprehensive field validation of a multi-resolution Convolutional Long Short-Term Memory (ConvLSTM) framework for predicting retaining wall deformation during staged excavation. The framework is trained on Gaussian noise-augmented numerical simulations and integrates ConvLSTM models operating at different temporal resolutions through a stacking ensemble strategy. The proposed framework is validated using field monitoring data from 34 inclinometers across 11 excavation sites in South Korea. Site-wise prediction performance is systematically evaluated using multiple evaluation metrics, with analyses of the influence of temporal deformation irregularity and spatiotemporal prediction characteristics on model performance. The results demonstrate that the framework predicts retaining wall deformation associated with up to 5.0 m of additional excavation with an average mean absolute error of 1.4 mm and a coefficient of determination of 0.93 across the excavation sites. These results indicate that the framework, although trained exclusively on numerically simulated and augmented database, can be effectively applied to diverse field excavation conditions and achieve a reliable level of prediction accuracy in practical retaining wall deformation prediction.
Convolutional long short-term memory networks (ConvLSTMs) are widely used for precipitation forecasting, but most evidence for their performance comes from dense, high-frequency radar sequences. This study tests whether convolutional recurrence improves one-day-ahead rainfall-field prediction on small daily reanalysis grids. Indian Monsoon Data Assimilation and Analysis (IMDAA) fields for June-September 1998-2020 were analysed for Bengaluru, Delhi, Kolkata and Mumbai. Ten naive, statistical, tree-based and neural approaches were compared using atmospheric-only and rainfall-history-plus-atmospheric inputs. Performance was assessed for complete fields, domain-mean rainfall, spatial anomalies and high-rainfall days. ConvLSTM did not consistently outperform simpler alternatives. FC-LSTM produced the numerically lowest domain-mean rainfall error in Bengaluru, Kolkata and Mumbai, whereas persistence performed best in Delhi. ConvLSTM produced the numerically lowest spatial-anomaly error only in Mumbai, where rainfall fields showed greater short-term spatial continuity and rainfall-history inputs improved all three neural architectures. The difference between ConvLSTM and FC-LSTM was nevertheless small. Neural models underestimated rainfall magnitude and predicted too few threshold exceedances on high-rainfall days, while persistence achieved the highest detection performance in every city. Post-hoc analyses showed that the selected models were most sensitive to the latest input day, with broader recent-lag sensitivity in Mumbai. These findings show that gridded inputs alone do not justify ConvLSTM and that architecture choice should follow strong benchmarking across average, spatial and high-rainfall performance.
Long-horizon prediction of three-dimensional (3D) wall-bounded turbulence with machine-learning methods remains a challenging task, due to the rapid accumulation of autoregressive errors and the substantially computational cost. To address these challenges, we present a hybrid machine-learning framework, in which a channel-time-attention Swin-UNet (CTA-Swin-UNet) and a multi-time-scale fusion correction (MTFC) strategy are developed to predict the turbulent flow fields in a wall-parallel plane, with affordable computational cost. Then, 3D flow fields are reconstructed via a resolvent-based spectral linear stochastic estimation (SLSE), rooting from the predicted planar flow. Results show that the CTA-Swin-UNet outperforms the baseline models (LSTM, FNO and traditional Swin-UNet) in both single-step prediction and autoregressive rollouts, indicating the effectiveness of introducing the CTA module into the Swin-UNet architecture. At the same temporal interval, the CTA-Swin-UNet remains stable for approximately 150 rollout steps, while the baseline models fail within 20 to 50 rollout steps. After introducing the MTFC strategy, a longer horizon upto 300 steps is achieved. Using the resolvent-based SLSE reconstruction further recovers the 3D flow structures and energy spectral distributions from the predicted planar inputs, which demonstrates that the proposed framework provides an effective and computationally efficient approach for long-horizon autoregressive prediction of 3D wall-bounded turbulence.
Leaf Area Index (LAI) is a fundamental biophysical variable governing land-atmosphere interactions; however, LAI forecasting at high spatial resolution remains an unsolved challenge. While recent machine learning approaches have demonstrated LAI estimation at point or regional scales, none provides a gridded, meteorology-driven prognostic forecast suitable for subseasonal land surface and climate modeling applications. Here we present a sequence-to-sequence Convolutional LSTM (ConvLSTM) framework that generates daily 1-km LAI forecasts up to 30 days ahead, driven by historical LAI sequences and daily meteorological forcing including temperature and precipitation. Trained and evaluated over the South-Central United States -- a region of strong climate gradients and diverse vegetation -- the model achieves a domain-averaged RMSE of 0.36 at a 30-day lead time, more than a third lower than the persistence baseline. Forecast skill remains robust across seasons, geographic distributions, and plant functional types, including forests, grasslands, shrublands, and croplands. To our knowledge, this is the first demonstration of skillful LAI forecasting at a 30-day horizon at 1-km resolution.