Locating survivors of building collapses within the first 72 hours is a critical challenge in disaster response, and existing sensing modalities provide only partial information about the structure beneath the rubble. This paper proposes drone-based quantum magnetometry as a complementary modality and develops a simulation pipeline spanning rubble physics, sensor-array deployment, and active spatial reconstruction. We use Unreal Engine to generate a steel-reinforced concrete parking-garage collapse and compute the induced magnetic field via a per-triangle dipole approximation, establishing that meaningful magnetic structure is recoverable in the sub-pT to sub-nT range from roughly 1 m above the roofline. Then, we feed sparse multi-sensor samples into a Gaussian Process Regression back-end driven by Bayesian active sampling and validate the pipeline across multiple independent collapse realizations; a three-sensor array optimizes the trade-off between gradient resolution and UAV payload constraints, and active sampling reaches peak structural correlation in roughly 100 samples. Together, these results indicate that quantum-grade sensing could become a useful tool for drone-based structural analysis and potentially void detection in collapsed buildings.
Natural disasters frequently inflict severe damage to the built environment, which demands a rapid, reliable, and cost-effective damage assessment for emergency response. However, traditional methods for post-disaster damage assessment often rely on static, labor-intensive data collection strategies that can be prohibitively expensive and struggle to adapt to dynamic post-disaster conditions. In this study, we propose a cost-aware Bayesian optimization framework combined with level-set estimation that continuously guides autonomous data collectors, e.g., an unmanned aerial vehicle (UAV), toward the most informative regions. By dynamically updating damage estimates across different geographic zones, our approach systematically reduces uncertainty while minimizing operational costs. The proposed framework is first validated using a controlled synthetic toy study, demonstrating the agent's ability to efficiently trace damage boundaries, recover the underlying damage map, and rapidly reduce predictive uncertainty. Furthermore, the approach is evaluated using high-fidelity disaster data generated by the Regional Resilience Determination (R2D) software. The results of the algorithm provide accurate and timely damage estimates that support informative and fast emergency response.
Boyang Xu, Mostafa Reisi Gahrooei, Mohammad Ilbeigi +1
Quantum sensors offer significant advantages over classical devices in spatial resolution and sensitivity, enabling transformative applications across materials science, healthcare, and beyond. Their practical performance, however, is often constrained by unmodelled effects, including noise, imperfect state preparation, and non-ideal control fields. In this work, we report the first experimental implementation of a graybox modelling strategy for a solid-state open quantum system. The graybox framework integrates a physics-based system model with a data-driven description of experimental imperfections, achieving higher fidelity than purely analytical (whitebox) approaches while requiring fewer training resources than fully deep-learning blackbox models. We experimentally validate the method on the task of estimating a static magnetic field using a single-spin quantum sensor, performing Bayesian inference with a graybox model trained on prior experimental data. Using roughly 10,000 training datapoints, the graybox model yields several orders of magnitude improvement in mean squared error over the corresponding physics-only model, as well as significant improvement over a blackbox model with comparable size. These results are broadly applicable to a wide range of quantum sensing platforms, not limited to single-spin systems, and are particularly valuable for real-time adaptive protocols, where model inaccuracies can otherwise lead to suboptimal control and degraded performance.
Landslide monitoring and simulation play an important role in urban safety assessment and disaster prevention. Existing landslide simulation pipelines typically rely on digital elevation model and mesh-based representations, which are suitable for geometric analysis, but often lack visual realism. This limitation reduces their effectiveness in interactive applications, hazard communication, and public education. In this paper, we propose a UAV-based scan-to-simulation framework that bridges photorealistic scene capture and physics-based landslide simulation through 3DGS. Specifically, our pipeline includes four stages: (1) UAV-based acquisition of slope imagery, (2) reconstruction of a low-anisotropy 3DGS scene representation, (3) volumetric conversion of the target simulation region by filling the interior of the surface-based model, and (4) integration with the Material Point Method (MPM) for landslide simulation. We validate the proposed framework on a real landslide site in Hong Kong that experienced a severe landslide event. The results show that our method supports both realistic visual reconstruction and effective simulation.