Cross-Receiver Open-Set Radio Frequency Fingerprinting via Structure-First Adaptation
Authors: Fengchong Yao, Jianbing Li, Qing Liu, Kefeng Song, Haitao Li, Song Wang, Feixiang Wang
Organizations: School of Information Systems Engineering, Information Engineering University, Zhengzhou, 450001, China
Abstract
Radio frequency fingerprint identification (RFFI) provides a critical physical-layer security mechanism for dynamic Internet of Things (IoT) and ad hoc networks. However, the decentralized and open nature of these networks imposes two strict deployment criteria: the credential must transfer reliably across physically dispersed, heterogeneous receivers, and it must decisively reject unregistered rogue traffic. Cross-receiver hardware shifts depress the confidence of registered devices and may also place unseen rogue transmitters in high-confidence known regions under naive domain adaptation, increasing false acceptance. To address these risks, we propose CRODA-ST, a joint optimization framework that couples Discriminative Structure Anchoring (DSA) with Rejection Oriented Alignment (ROA). Within this coupled objective, DSA establishes a stable target-known semantic foundation for shifted registered devices, while ROA regularizes the open-set decision boundaries governing rejection of unseen rogue transmitters. In the canonical WiSig setting, CRODA-ST achieves an open-set classification rate (OSCR) of 0.9580 and a target-domain false positive rate of 0.0469 at a 90% true positive rate (FPR90). A controllable LoRa simulation provides a complementary diagnostic under synthesized hardware distortions. At the distinct source-calibrated deployment operating point with rho = 0.80, CRODA-ST yields a target-unknown false acceptance rate (FAR) of 0.0075 in the evaluated setting.
Radio-frequency (RF) fingerprinting systems must operate in open-world environments where signals from unknown transmitters and temporal drift introduce distribution shift at test time. Out-of-distribution (OOD) detection provides a natural framework for this problem, yet its application to RF fingerprinting (RFF) remains limited. A key barrier to their adoption is that most OOD detectors require auxiliary OOD data for parameter tuning, an assumption that is difficult to satisfy in RF environments where representative OOD data is impractical to collect. In this work, we introduce a promising set of OOD detection methods from the machine learning literature to open-set RFF domain. We present these methods within a unified mathematical framework based on information theory, which is a natural framework for communication systems. Our framework allows for the systematic analysis of methods and development of new methods. We further demonstrate the applicability of recent work on tuning OOD detectors without given OOD tuning data for open-set RFF. We evaluate on the POWDER RF fingerprinting dataset, showing that detectors tuned without any given OOD data achieve performance comparable to baselines with access to true OOD tuning data and greatly out-perform baseline approaches without access to true OOD tuning data, showcasing the practical viability for the RFF problem.
Radio frequency fingerprint identification (RFFI) exploits transmitter-specific hardware imperfections as physicallayer identity cues for Internet of Things (IoT) devices, but deep models often degrade across acquisition environments. In multi-antenna reception, antenna topology and frequencyoffset dynamics structure receiver observations, while capturedependent variation distorts target embeddings and misaligns source-trained decision boundaries. This article proposes physicsinformed structure anchoring with capture-aware prototype calibration (PISA-CAPC) to address both representation and decision mismatches. The two stages separate source representation construction from target decision correction. During source training, PISA organizes antenna tokens through a topology-guided graph, conditions propagation on CFO-derived acquisition dynamics, and applies bounded contextual residual suppression to preserve identity evidence. At deployment, unlabeled capture-aware prototype calibration (U-CAPC) estimates capture-local prototypes and recalibrates target decision scores while keeping the representation and source classifier fixed. Thus, calibration uses neither target labels nor target-domain backbone updates. On a measured WiFi benchmark with four receive antennas and ten transmitters, PISA-CAPC achieves a mean target-domain Macro-F1 of 0.9257 under a balanced transductive setting. Component ablations support complementary roles for topology-guided anchoring, CFO-conditioned modulation, reliability-aware token aggregation, contextual suppression, and capture-aware calibration. These results indicate that physically motivated representation learning can be combined with labelfree decision calibration to improve cross-environment RFFI under the evaluated protocol without changing the deployed backbone.
Heterogeneous RF sensing differs substantially in feature structure, spatial layout, and temporal scale, making existing models difficult to reuse across devices, environments, and RF modalities. We propose FSTC-Encoder, which unifies heterogeneous RF representation learning through feature, spatial, and temporal correlation modeling. Structure-aware feature encoding accommodates different signal structures, set-based spatial encoding aggregates variable observations, and hierarchical temporal encoding jointly captures local variations and long-range dependencies. Across sensing tasks and modalities, FSTC-Encoder retains the same spatial--temporal backbone architecture while varying only the feature configuration and task head. Across Widar3.0, CSI-Bench, and XRF55, FSTC-Encoder achieves 92.15% mean Accuracy under multi-factor cross-domain protocols, ranks first on three of four additional sensing tasks, remains consistently strong across WiFi, millimeter-wave radar, and RFID, and reduces the cross-modality performance gap from 18.85% to 12.93% through cross-RF learning. These results demonstrate that FSTC-Encoder achieves high domain robustness, task generality, and modality extensibility.