Energy-Efficient GPU DVFS for Fine-Tuning of SLMs on Resource-constrained Embedded Devices

Despite rapid advances in large language models (LLMs), deploying and personalizing them on resource-constrained devices remains impractical due to high VRAM, time, and energy costs. Parameter-Efficient Fine-Tuning (PEFT) of Small Language Models (SLMs) offers a promising alternative, yet few studies compare PEFT methods across architectures using both general and personalization benchmarks while accounting for energy consumption. We compare five fine-tuning approaches (Full Fine-Tuning, LoRA, LoRA+, QLoRA, and BitFit) on four SLMs from two families (Transformer-based: TinyLlama-1.1B, Qwen3-1.7B; SSM-based: Mamba-1.4B, Mamba-2-1.3B) across three GLUE tasks (SST-2, QNLI, STS-B) and three LaMP personalization tasks (LaMP-1, LaMP-2, LaMP-3). Each configuration is evaluated with the energy-focused NetScore-E and the memory-focused NetScore-M, the two variants that reflect the constraints binding on-device deployment. Methods are selected with a strict energy-first rule (highest NetScore-E, ties broken by NetScore#). LoRA+ achieves the highest NetScore-E in 19 of 24 configurations and the highest NetScore-M in 13 of 24, and is the selected method in 18 of 24. QLoRA, available only for the Transformer models, cuts peak finetuning VRAM by up to 3.9x relative to LoRA and therefore takes the best NetScore-M in 5 of the 12 Transformer configurations, although its de-quantization overhead leaves it selected in only one of them once energy decides. BitFit and full fine-tuning are almost never competitive on either variant, and TinyLlama-1.1B leads the energy-focused NetScore-E on five of the six benchmarks and the memory-focused NetScore-M on four. These results show that compact SLMs paired with PEFT provide a practical, energy-aware path to personalized on-device deployment, with the optimal method set by the dominant constraint: LoRA+ for energy and QLoRA for memory.

Large language model (LLM) serving spans diverse applications with stringent service-level objectives (SLOs), often requiring GPUs to run at maximum frequencies and increasing energy consumption. Existing energy-management approaches adapt GPU frequencies only at the request or inference-phase level, overlooking operator-level differences in frequency sensitivity between Attention and feed-forward networks (FFNs). We find that the energy-optimal frequencies of Attention and FFN (A/F) differ and vary with the inference phase, workload, and system configurations. However, runtime variability and independent A/F frequency control create a large search space and high communication overhead. To address these challenges, we present AFlex, a framework that jointly optimizes resource provisioning and GPU frequency scaling for disaggregated A/F serving. AFlex introduces a global scheduler and a local operator-level dynamic voltage and frequency scaling (DVFS) controller to determine A/F resource allocations and frequencies. It further introduces an interleaved A/F pipeline with dynamic microbatch depth and adaptive request batching to reduce pipeline bubbles. We implement AFlex in SGLang and evaluate it on NVIDIA A800 GPUs using Qwen3-32B and Mixtral-8$\times$7B under production Conversation and Coding traces. \AFlex reduces energy per token by up to 49% over state-of-the-art disaggregated serving and 48% over frequency-scaling systems while satisfying TTFT and TPOT SLOs.

Deploying Large Language Models (LLMs) directly on mobile platforms at the edge is gaining traction due to a myriad of benefits, such as increased privacy, personalization, and reduced latency. However, LLMs have heavy computational requirements, which are difficult for resource-constrained mobile and edge platforms to fulfill. In addition to limited compute resources, mobile and edge systems often have a compact form factor and lack physical mechanisms to dissipate heat generated from high processor usage rates (e.g., fans) to prevent throttling and reduced processing power, which LLMs can easily cause. To mitigate these effects, prior works have proposed various power governing strategies, such as dynamic voltage and frequency scaling (DVFS), for reducing power and heat generation for heavy computational tasks on mobile platforms. Recently, DVFS methods tailored for mobile LLMs have also been proposed. However, these methods mostly focus on optimizing hardware parameters and processor frequencies, and they fall short under some thermally constrained scenarios. Drawing from recent advances in machine learning, we identify and take advantage of the key insight that not all tokens require full-depth inference to maintain high-quality generation. Motivated by this, we present PELM, a solution that augments traditional DVFS processor frequency tuning with two additional workload-specific knobs: 1) speculative decoding and 2) variable verification depth to expand the optimization space to multiple dimensions for more power efficient on-device LLM inference. In extensive evaluations across hardware platforms and datasets, PELM demonstrates superior performance compared to state-of-the-art power governing methods, with up to 23.1% speedup and 52.4% reduction in energy consumption, while maintaining comparable task performance. The source code is available at https://github.com/imec-nu/PELM.