cs.CLAug 9, 2026

Tied Trit-Planes: Constraining PTQTP to a Uniform Nine-Level Quantizer, with a Persistent Folded Format for Disk-Streamed Mixture-of-Experts Serving

Authors: Matteo Grella

Organizations: Crisis24

Abstract

PTQTP decomposes LLM weight matrices into two ternary (trit) planes with two free per-group scales. Tying the scales to a fixed ratio of three collapses the decomposition into a single uniform nine-level quantizer, a known balanced-ternary identity. To our knowledge, at the time of writing, this work is the first to impose that identity as a constraint inside PTQTP's solver. The two trit planes then fold losslessly into one 4-bit code plane that we make the persistent serving representation: disk bytes, expert-cache bytes, and kernel input are the same 4.0625-bits/weight blocks, consumed in one integer dot pass. For this conjunction (ratio-3 nine-level code, CPU-SIMD kernels, SSD expert streaming, identical persistent bytes) we likewise found no precedent. We apply this to the routed experts of DeepSeek-V4-Flash-0731, a 284B-A13B mixture-of-experts model, quantizing in one shot from the released MXFP4 expert weights and streaming experts from SSD on a 64 GB laptop. Against a 4.5-bit Q4_K baseline, measured one process per fixture with an expert-lossless anchor arm as reference control, the tied model matches the official serving API on 5/5 fixtures at step 0 (Q4_K: 4/5) and 12/14 captured continuation steps (11/14), scores 86 vs. 84 on a 100-item MMLU subset, decodes 6.7% faster in decode phase, and ships 9% smaller files: no detected fidelity difference at these small evaluation sizes, and every fixture-level difference between the arms traces to a single measured near-tie cell. The tied fit nevertheless shows higher weight-reconstruction error and worse perplexity, a measured dissociation between proxy metrics and reference fidelity. A cumulative trunk-ternarization ladder and bitwise-pinned aarch64/x86-64 kernels complete the report. All code, formats, and evaluation artifacts are open source in the fucina inference stack.

Explore similar work

CardsList
Aug 31, 2026cs.LG

QTEA: Ternary LLMs with Sparse Residual Salient Weight and By-Column Optimization

Weight-only post-training quantization (PTQ) can alleviate the computational burden of serving large language models (LLMs) at scale. However, existing PTQ methods often fail to generalize across models and suffer severe accuracy loss below 2 bits. Many leverage unstructured sparsity to mitigate this loss, but at the cost of regularity and GPU-friendly execution. We present QTEA, a sub-2-bit PTQ framework that quantizes weights into ternary values and uses salient weights as residual error compensators. To maintain hardware efficiency, residuals are assigned to selected columns with semi-structured 1:41:4 sparsity within the salient columns. We further add column-wise rescale refinement to GPTQ-style column-by-column quantization, alternately updating per-column scales and ternary assignments to reduce reconstruction error. We also identify order-dependent error propagation in GPTQ and introduce error decay to attenuate late-stage error accumulation. On Qwen3-14B, QTEA compresses all weights to an effective 1.7 bits per weight while improving average accuracy over the strongest ternary PTQ baseline by 16.7%. It also achieves 1.40×\times and 2.61×\times lower perplexity on WikiText and C4 respectively. This trend holds on Llama3-8B, where QTEA obtains a 6.6% accuracy gain and 1.34×\times / 1.95×\times lower perplexity on the same datasets. Finally, we develop a lookup-table based kernel that achieves 7.2×\times faster per-token generation over an FP16 baseline. Code is available at https://github.com/Intelligent-Microsystems-Lab/QTEA.
Yipin Guo, Arun M George, Jie Fu +3
Weight-Only QuantizationModel WeightsLarge Language
AskPDF
Nov 9, 2025cs.CL

You Had One Job: Per-Task Quantization Using LLMs' Hidden Representations

Many LLM applications require only narrow capabilities, yet standard post-training quantization (PTQ) methods allocate precision without considering the target task. This can waste bits on layers that are less relevant to the task signal while over-compressing layers that are critical for downstream behavior. We propose Task-Aware Quantization (TAQ), a training-free, weight-only mixed-precision PTQ framework that uses a small set of unlabeled task calibration prompts to allocate higher precision to task-relevant transformer layers under a fixed bit budget. TAQ estimates layer importance from hidden representations and output sensitivity, and we instantiate it with three scoring rules: TAQ-IS, based on activation information and stability; TAQ-KL, based on output-distribution sensitivity under a quantization-noise proxy; and TAQ-O, a label-informed oracle diagnostic for analyzing layer sensitivity. Across several benchmarks, TAQ outperforms task-agnostic baselines such in most settings, with especially strong gains in the accuracy--memory ratio. We further validate that these gains translate to real deployment behavior through hardware throughput and latency measurements, and analyze calibration robustness and residual-stream error propagation. Overall, TAQ turns mixed-precision PTQ from a model-centric compression step into a task-conditioned precision-allocation problem. A reference implementation is available at \href{https://anonymous.4open.science/r/TAQ-9217/README.md}{\includegraphics[height=1em]{imgs/github-mark.png}}.
Amit LeVi, Raz Lapid, Rom Himelstein +3
Weight-Only QuantizationQuantizationLLM Inference EfficiencyHidden States
AskPDF
Date pendingcs.PF

Dynamic Expert Quantization for Scalable Mixture-of-Experts Inference

Mixture-of-Experts (MoE) has become a practical architecture for scaling LLM capacity while keeping per-token compute modest, but deploying MoE models on a single, memory-limited GPU remains difficult because expert weights dominate the HBM footprint. Existing expert offloading and prefetching systems reduce the resident set, yet they often pay expert-loading costs on the critical path when activation becomes dense. Post-training quantization (PTQ) lowers the footprint without transfers, but prevailing pipelines fix expert bit-widths offline and assume routing remains stable, even though MoE expert utilization is heavy-tailed and the hot set can shift across workloads. We present DynaExq, a runtime-aware mixed-precision serving system that treats single-GPU MoE inference under a hard HBM envelope as an online, budget-constrained precision allocation problem. The key insight is to keep the experts that dominate runtime traffic resident at higher precision, while maintaining a low-precision fallback for the remaining experts, so the system can reduce transfer volume and avoid the waiting latency that limits offloading and prefetching under dense activation. DynaExq estimates long-horizon expert hotness from router traces, selects a per-layer high-precision resident set via a budget-feasible top-nn rule, and applies promotions and demotions asynchronously through stable expert handles so the forward pass always executes on a fully materialized expert version. Across Qwen3-MoE-30B/80B and six benchmarks, DynaExq improves accuracy over static PTQ on Qwen3-80B (73.09% to 77.57%) under comparable device-memory budgets and achieves up to 2.73x higher throughput than offloading/prefetch baselines at batch size 32.
Kexin Chu, Dawei Xiang, Zixu Shen +3
Mixture-Of-Expert InferenceMixed-Precision QuantizationQuantizationExpertsExpert DemonstrationsLarge Language
AskPDF