Over-The-Air Extreme Learning Machines with Nonlinear Stacked Intelligent Metasurfaces

The upcoming sixth Generation (6G) of wireless networks envisions ultra-low latency and energy efficient Edge Inference (EI) for diverse Internet of Things (IoT) applications. However, traditional digital hardware for machine learning is power intensive, motivating the need for alternative computation paradigms. Over-The-Air (OTA) computation is regarded as an emerging transformative approach assigning the wireless channel to actively perform computational tasks. This article introduces the concept of Metasurfaces-Integrated Neural Networks (MINNs), a physical-layer-enabled deep learning framework that leverages programmable multi-layer metasurface structures and Multiple-Input Multiple-Output (MIMO) channels to realize computational layers in the wave propagation domain. The MINN system is conceptualized as three modules: Encoder, Channel (uncontrollable propagation features and metasurfaces), and Decoder. The first and last modules, realized respectively at the multi-antenna transmitter and receiver, consist of conventional digital or purposely designed analog Deep Neural Network (DNN) layers, and the metasurfaces responses of the Channel module are optimized alongside all modules as trainable weights. This architecture enables computation offloading into the end-to-end physical layer, flexibly among its constituent modules, achieving performance comparable to fully digital DNNs while significantly reducing power consumption. The training of the MINN framework, two representative variations, and performance results for indicative applications are presented, highlighting the potential of MINNs as a lightweight and sustainable solution for future EI-enabled wireless systems. The article is concluded with a list of open challenges and promising research directions.

Stacked intelligent metasurfaces (SIMs) represent a breakthrough in wireless hardware by comprising multilayer, programmable metasurfaces capable of analog computing in the electromagnetic (EM) wave domain. By examining their architectural analogies, this article reveals a deeper connection between SIMs and artificial neural networks (ANNs). Leveraging this profound structural similarity, this work introduces a learnable SIM architecture and proposes a learnable SIM-based machine learning (ML) paradigm for sixth-generation (6G)-andbeyond systems. Then, we develop two SIM-empowered wireless signal processing schemes to effectively achieve multi-user signal separation and distinguish communication signals from jamming signals. The use cases highlight that the proposed SIM-enabled signal processing system can significantly enhance spectrum utilization efficiency and anti-jamming capability in a lightweight manner and pave the way for ultra-efficient and intelligent wireless infrastructures.

Wireless physical neural networks (WPNNs) embed neural computation directly into analog hardware, offering lower energy consumption and latency than conventional digital implementations. In this paper, we propose a deep WPNN in which nonlinear activations are realized by a multi-hop multiple-input multiple-output (MIMO) relay network, in which each relay implements a trainable complex linear gain and bias, followed by the power amplifier's intrinsic nonlinearity acting as an activation function. The cascade of multiple relays therefore realizes an over-the-air fully connected network whose parameters can be trained end-to-end. We develop two transceiver designs for different channel state information (CSI) availability scenarios: a least squares (LS)-based scheme requiring only receiver-side CSI, and a singular-value-decomposition (SVD)-based scheme requiring both transmitter-side and receiver-side CSI. Simulation results show that the proposed architecture enables accurate over-the-air inference for image classification. In particular, the results highlight the advantage of exploiting hardware nonlinearity for enhanced inference capability.