Abstract
Compact snapshot hyperspectral cameras provide rich instantaneous spectral measurements for ground-level machine vision, but at lower spatial resolution than standard RGB cameras. RGB-guided hyperspectral super-resolution (HSR) addresses this limitation by transferring spatial detail from a high-resolution RGB guide to a low-resolution hyperspectral image (HSI). These dual-camera systems are typically in a horizontal rig geometry, requiring cross-camera image alignment due to different fields of view. However, residual misregistration can inject spurious high-frequency details. Existing learned unaligned-fusion methods are usually trained for a fixed spectral support and spatial scale factors and can be computationally demanding, limiting their flexibility across sensors. We propose a lightweight and interpretable RGB-guided HSR framework combining cross-modal flow alignment with model-based Gram-Schmidt orthogonalization fusion. The method first warps the RGB guide onto the HSI grid, then estimates an energy-based confidence weight map by measuring local alignment reliability. This map is then used both in a weighted least-squares spectral regression and in a gated fusion between the super-resolved estimate and an HSI-preserving estimate. Unlike existing learned methods, the proposed framework has a low computational footprint and supports VIS-NIR spectral supports and scale factors without retraining. Experiments on the Real benchmark show that the proposed method improves reconstruction accuracy over learned fusion baselines while remaining substantially faster. On a 34-frame sequence acquired with our real RGB-HSI dual-camera setup, a reduced-resolution quantitative evaluation validates the method under genuine cross-sensor radiometric, noise, and geometric differences, while native-resolution qualitative results demonstrate deployment on the full 51-band VIS-NIR acquisition.
Explore similar work
Jun 4, 2026cs.CV
Hyperspectral imaging provides rich spectral information for quantitative remote sensing, yet hyperspectral sensors remain costly and thus unavailable in many UAV deployments. Spectral super-resolution (SSR) seeks to reconstruct hyperspectral images (HSIs) from multispectral images (MSIs). Most existing SSR methods assume a fixed and known spectral response function (SRF) and are therefore limited to single-sensor settings. In practical cross-sensor scenarios, the spectral degradation from HSI to MSI is unknown and varies with sensor characteristics and scene content, which renders HSI reconstruction ill-posed. This paper proposes a physics-guided deep unfolding network, termed PGU-Net, to address blind cross-sensor SSR by jointly estimating the HSI and a learnable spectral transformation function (STF). PGU-Net unrolls an alternating optimization procedure into an end-to-end trainable architecture with stages, where each stage sequentially updates the HSI and the STF. Both modules combine learnable proximal networks with differentiable closed-form solvers, enabling physical interpretability while retaining strong representation capacity. Experiments on benchmark datasets (CAVE and NTIRE 2022) with multiple SRFs demonstrate accurate recovery of the STF (degradation operator) and improved reconstruction performance over state-of-the-art SSR methods. Furthermore, evaluations on a real UAV cross-sensor dataset (Headwall Nano HSI and DJI P4 Multispectral MSI) verify the effectiveness and robustness of PGU-Net under truly blind conditions, and suggest that the estimated STF may exhibit land-cover-related differences.
Zhaolin Li, Jinsong Chen, Shanxin Guo +3
May 20, 2026eess.IV
Hyperspectral super-resolution (HSR) reconstructs a high-spatial-resolution hyperspectral image by fusing a low-resolution hyperspectral image (LR-HSI) with a high-resolution multispectral image (HR-MSI). In the absence of real-world paired data, HSR methods are evaluated almost exclusively on synthetic experiments derived from hyperspectral datasets through Wald's protocol. Despite the protocol's widespread adoption, its practical implementation varies markedly across research works, typically relying on a single (usually Gaussian) or very few point spread functions (PSFs), one or two spectral response functions (SRFs), and a couple of spatial downsampling factors. As a result, reported performance figures are difficult to compare across the literature, in addition to being often difficult to reproduce; furthermore, they may not generalize across realistic sensing conditions. We introduce HyperBench, a unified and extensible framework that standardizes synthetic experimentation for HSR. HyperBench supports diverse degradation configurations spanning ten PSFs, four SRFs derived from operational multispectral sensors, configurable spatial downsampling factors, and matched additive white Gaussian noise; its goal is to automate large-scale evaluation and structured logging. By decoupling model development from experimental design, the framework enables reproducible, apples-to-apples cross-method comparison with minimal friction. We use HyperBench to evaluate six recently proposed HSR methods across a 70-configuration sweep on four widely used hyperspectral scenes and observe that the inter-method PSNR spread widens from approximately 5 dB on the easiest PSF to over 13 dB on the hardest - a fragility that is structurally invisible to the prevailing single-configuration evaluation protocol. HyperBench code is available at https://github.com/ritikgshah/HyperBench .
Ritik Shah, Marco F. Duarte
May 7, 2026cs.CV
RGB-to-hyperspectral image reconstruction is a highly ill-posed inverse problem, since multiple plausible spectral distributions may correspond to the same RGB observation. Existing regression-based methods usually learn a deterministic mapping, which limits their ability to model reconstruction uncertainty and often leads to over-smoothed spectral responses. Although diffusion models provide strong distribution modeling capability, their direct application to hyperspectral reconstruction remains challenging due to the high spectral dimensionality, strong inter-band correlations, and strict requirement for spectral fidelity. To this end, we propose R2H-Diff, an efficient diffusion-based framework tailored for RGB-to-HSI reconstruction. Specifically, R2H-Diff formulates spectral recovery as a conditional iterative refinement process, enabling progressive reconstruction under RGB guidance. We proposed a Guided Spectral Refinement Module for RGB-conditioned feature fusion and a Hyperspectral-Adaptive Transposed Attention module for efficient spatial--spectral dependency modeling. Furthermore, a normalization-free denoising backbone is adopted to preserve spectral amplitude consistency, while a task-adapted linear noise schedule enables high-quality reconstruction with only five denoising steps. Extensive experiments on NTIRE2022, CAVE, and Harvard demonstrate that R2H-Diff achieves a favorable balance between reconstruction quality and computational efficiency. Notably, on NTIRE2022, R2H-Diff obtains 35.37 dB PSNR with a sub-million-parameter model of 0.58M parameters and 12.25G FLOPs, achieving the lowest model complexity among the evaluated methods while maintaining strong reconstruction fidelity.
Songyu Ding, Ronggiang Zhao, Mingchun Sun +1