Physical-State-Guided Diffusion Sampling for Full-Waveform Inversion
Authors: Chen Min, Haowen Jiang, Zheng Ma, Xiongbin Yan
Abstract
Full waveform inversion (FWI) estimates subsurface velocity from seismic recordings, but its ill-posedness and nonlinearity make accurate reconstruction strongly dependent on initialization and prior information. Diffusion posterior sampling provides a learned geological prior, yet directly coupling its denoiser to the nonlinear wave solver can yield unreliable physical guidance. We propose Physical-State-Guided Diffusion Sampling (PSG), which couples a persistent physical velocity to the diffusion prior through a Gaussian bridge. The physical state is refined by waveform fitting regularized by the denoised velocity, and in turn guides the reverse diffusion process. This formulation separates the wave-equation and denoiser gradients while preserving conventional FWI initialization and accumulated optimization history. On four OpenFWI families, PSG's terminal denoised estimates outperform classical and diffusion-based baselines under clean and missing-trace acquisitions and maintain strong structural recovery under measurement noise. Repeated stochastic runs preserve the dominant geological structures, with ensemble variability concentrated near geological interfaces and positively associated with local inversion error. A frozen OpenFWI-trained prior further supports inversion of the larger Marmousi, Overthrust, and BP2004 Salt models, recovering complex geological structures without retraining.
Full waveform inversion (FWI) recovers subsurface velocity from seismic recordings by solving a severely ill-posed, nonconvex PDE-constrained optimization. Classical regularizers stabilize the inversion but fail to reproduce realistic geological structures; recent diffusion-prior methods improve realism at the cost of a fragile trade-off between data fidelity and prior consistency. We propose Decoupled Latent Optimization (DLO), which relaxes the standard latent-optimization formulation into a quadratic-penalty objective over an auxiliary physical variable and a latent variable. The data-fidelity gradient acts in physical space, the diffusion sampler contributes only through a decoded prior sample, and the standard smoothed-velocity initialization of classical FWI is preserved. On the OpenFWI benchmark, DLO outperforms classical regularizers and existing diffusion-based methods under clean, noisy, and missing-trace acquisitions. The prior, trained on 70*70 OpenFWI models, transfers directly to the Marmousi and Overthrust benchmarks, where DLO recovers intricate fault structures and remains robust to initialization smoothing and measurement noise.
High-resolution velocity models are crucial for reservoir characterization and subsurface delineation. However, the band limited nature of our surface recorded data limits resolution. Utilizing well measurements to enhance the resolution of our subsurface models is an important objective. To this end, we present a diffusion-guided framework for structurally preconditioned velocity-model reconstruction from sparse well-log information. The proposed approach combines plane-wave PDE regularization, structurally preconditioned inversion, and measurement-guided diffusion posterior sampling within a unified formulation. Local structural slopes estimated through plane-wave destruction are used both to propagate well information along geological dip directions and to guide the diffusion sampling process through a joint velocity--slope generative prior. Numerical experiments on the Volve synthetic model and the Viking Graben field dataset demonstrate that the proposed framework improves structural continuity, lateral consistency, and geological realism compared with conventional structurally preconditioned inversion approaches while maintaining computationally practical inference through DDIM sampling.
Seismic wavefield simulation is fundamental to seismology, but conventional finite-difference (FD) methods remain limited by numerical dispersion and stability constraints, which often require dense spatial grids and small time steps and thereby severely limit the effectiveness of iterative inversion workflows. We introduce a conditional diffusion-based wavefield propagator that advances seismic wavefields recursively from one time step to the next. Instead of learning an unconditional data distribution of wavefield evolution, the model is conditioned by a short history of recent wavefield time steps (snapshots), the velocity model, and the wavefield time step index, allowing it to represent the conditional transition between adjacent physical states. By training the network to directly predict the clean next wavefield snapshot, this strong physical conditioning makes it possible to replace the iterative reverse diffusion process with a single network evaluation for each predicted snapshot. To improve stability over long recursive rollouts, we further introduce a causal time-weighted loss, in which adaptive weights, accumulated as exponential moving averages of per-snapshot training errors, emphasize training directions that are consistent with the forward propagation sequence and reduce the amplification of one-step prediction errors. Because the learned propagator is tied to the temporal spacing of the training snapshots rather than to the FD stability limit, it can advance the wavefield using a physical time step ten times larger than that required by the underlying solver. Experiments on the Overthrust, SEG/EAGE, and Marmousi models show that the proposed method accurately reproduces wavefield snapshots and shot gathers and achieves an end-to-end speedup of 2.17 x over a GPU-accelerated tenth-order staggered-grid FD implementation under matched hardware conditions.