Shared-Prefix KV Reuse Across Standard LoRA Adapters: Quality and Serving Tradeoffs

LLM serving systems already reuse KV caches, but only when the reused text sits at the very start of the prompt. Two growing workloads break this condition: a retrieval-augmented generation server assembles a different set of retrieved chunks for every query, and a multi-agent coordinator reads reports written by other agents. Reused inside a new prompt, a cache carries the wrong positions and never attended to the other sources. The cache may also have been written by a different checkpoint of the same model family, which changes the stored values. Repair methods for such caches have appeared in three separate communities, each measured on its own terms, and existing benchmarks test only exact-prefix reuse, where nothing is lost. KVShareArena benchmarks KV-cache reuse across prompt contexts and model checkpoints on retrieved chunks and agent reports. It scores every method by the fraction of the gap it recovers between no cache and full recomputation, and charges compute, memory, and per-request latency with the cache in hand, reporting the one-time cost of building a cache separately. We find that correcting positions, which needs no recomputation, is enough until a question needs several sources at once. There, only methods that pay, by re-encoding part of the cache or by training, recover half to two thirds of the gap; unrepaired caches can be worse than no cache. Cache-compression methods that are harmless on a single prompt fall significantly behind position correction on freshly written agent reports. These patterns hold across three model boards. When a different checkpoint wrote the cache, training-free methods are barely affected, while an adapter trained on one checkpoint's caches loses quality. Harness, frozen querysets, and cost accounting ship as a pip package with an automated submission workflow and a public leaderboard.

Modern large language model (LLM) serving systems increasingly operate over repeated or shared context, yet each model typically performs its own prefill computation even when another model has already processed the same input. Existing KV-cache reuse mechanisms substantially reduce redundant computation within a single model, but generally assume that the producer and consumer of a cache are identical. We study \emph{cross-model KV sharing}, which translates the KV state produced by a source model into a representation that can be consumed by a different target model, including models that differ in scale, architecture, attention configuration, tokenizer, and model family. We evaluate the approach in both within-family and cross-family settings. For Qwen2.5-7B $\rightarrow$ Qwen2.5-1.5B, translated KV states improve LongBench2 accuracy from 27.59% to 34.48%, a gain of 6.89 percentage points over the native 1.5B baseline, while reducing handoff cost relative to native target prefill. For the cross-family Qwen2.5-1.5B $\rightarrow$ Gemma-2-2B setting, KV handoff reduces target-side prefill cost by up to 67.05% at 4K context length while maintaining decoding perplexity close to native-model baselines. In a more heterogeneous Llama3.1-70B $\rightarrow$ Qwen2.5-7B setting, cross-family handoff achieves 44.0% accuracy compared with 45.7% for native Qwen2.5-7B inference, while reducing measured latency from 899ms to 138ms. These results provide initial evidence that KV states can serve as transferable computational representations rather than strictly model-local caches, and motivate \emph{context mobility} as a systems abstraction for reducing redundant prefill across heterogeneous LLM and multi-agent inference workflows.

Production deployments often swap between different-sized models in a family for cost-quality cascading, mid-conversation switching, and routing, and each swap forces the receiver to repay the prefill from scratch. We propose cross-model KV cache transfer, where the receiver reuses the source's KV cache, skipping prefill. We find that cross-model KV has substantial linear structure across matched-KV pairs, where source and target share KV head count and per-head dimension. On Qwen3 14B->32B, one source layer explains 56% of variance in the target's keys and 32% in values, rising to 79% and 65% with multiple source layers. Building on this, we design a closed-form ridge mapper that operates per head and proceeds in three steps. First, for each target layer we select the top-k most predictive source layers and concatenate their KV as input. Second, we strip RoPE from the keys before mapping, so the fit is position-free and reusable across context lengths. Third, we fit ridge regression on a small calibration set of 500 FineWeb-Edu sequences of 1,024 tokens each. Surprisingly, across six pairs in three families, this linear mapper retains 73-98% of the receiver's standalone-prefill accuracy on four pairs, while two degrade sharply. A nonlinear MLP recovers up to +37 pp HellaSwag retention on the failures. The mapper runs 2.7-25x faster than re-prefill and remains stable across multi-turn handoff, making cross-model KV cache transfer practical.