Organizations: Department of Electrical and Computer Engineering, Duke University, Durham, NC 27708, USA. · Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, MA 02139, USA.
Running artificial intelligence (AI) models directly on edge devices such as smartphones, wearables, and drones offers low latency, pervasive scalability, and data privacy, but these devices rarely carry the computing capability that modern neural networks demand. Edge accelerators have been developed in response, yet each adds computing hardware to devices already constrained in size, weight, power, and cost (SWaP-C). An alternative lies in what these devices already carry: the frequency mixer in every wireless radio multiplies signals in time, natively performing convolution in the frequency domain. Here we introduce radio-frequency convolutional neural networks (RF-CNNs), which repurpose existing communication hardware for CNN inference. Multi-channel convolutions are mapped onto frequency tones for a passive mixer to execute in a single pass. We experimentally demonstrate that RF-CNN runs deep CNNs up to 26.4 million parameters and nine layers from classification of wireless signals and images to controllable image generation, close to full-precision performance. Because the weights arrive over the air and the analog hardware is shared with communication, the edge device spends energy only on data preparation and readout-down to 0.72 femtojoules per multiply-accumulate, two orders of magnitude less than it would cost on an added digital processor. These results suggest that deployed wireless infrastructure can bring efficient, state-of-the-art AI inference to the billions of devices it already connects.
Covert channels (CCs) in wireless chips pose a serious security threat, as they enable the exfiltration of sensitive information from the chip to an external attacker. In this work, we propose an AI-based defense mechanism deployed at the RF receiver, where the model directly monitors raw I/Q samples to detect, in real time, the presence of a CC embedded within an otherwise nominal signal. We first compact a state-of-the-art convolutional neural network (CNN), achieving an 80% reduction in parameters, which is an essential requirement for efficient edge deployment. When evaluated on the open-source hardware Trojan (HT)-based CC dataset, the compacted CNN attains an average accuracy of 90.28% for CC detection and 86.50% for identifying the underlying HT, with results averaged across SNR values above 1 dB. For practical communication scenarios where SNR > 20 dB, the model achieves over 97% accuracy for both tasks. These results correspond to a minimal performance degradation of less than 2% compared to the baseline model. The compacted CNN is further benchmarked against alternative classifiers, demonstrating an excellent accuracy-model size trade-off. Finally, we design a lightweight CNN hardware accelerator and demonstrate it on an FPGA, achieving very low resource utilization and an efficiency of 107 GOPs/W. Being the first AI hardware accelerator proposed specifically for CC detection, we compare it against state-of-the-art AI accelerators for RF signal classification tasks such as modulation recognition, showing superior performance.
Abdelrahman Emad Abdelazim, Alan Rodrigo Diaz-Rizo, Hassan Aboushady +1
Modern edge devices increasingly rely on neural networks for intelligent applications. However, conventional digital computing-based edge inference requires substantial memory and energy consumption. In analog radio frequency (RF) computing, a base station (BS) encodes the weights of the neural networks and broadcasts the RF waveforms to the clients. Each client reuses its passive mixer to multiply the received weight-encoded waveform with a locally generated input-encoded waveform. This enables wireless receivers to perform the matrix-vector multiplications (MVMs) that account for most of the computation burden in edge inference with ultra-low energy consumption. Unlike conventional downlink transmissions which are optimized for communications, analog RF computing requires a computing-centric physical layer that controls both the analog MVM accuracy and the energy consumption for inference. Motivated by this, in this paper, we propose a physical layer design framework for analog RF computing in MU-MIMO wireless systems. We derive tractable models for computing accuracy and energy consumption for inference, formulate a joint BS beamforming and client-side scaling problem subject to computing accuracy, transmit power, and hardware constraints, and develop a low-complexity algorithm to solve the non-convex problem. The proposed design provides client- and layer-specific accuracy control for both uniform- and mixed-precision inference. Simulations under 3GPP specifications show that analog RF computing can significantly reduce client-side energy consumption by nearly two orders of magnitude compared to digital computing, while mixed-precision inference requires even lower energy consumption than uniform-precision inference. Overall, these results establish analog RF computing over wireless networks as a promising paradigm for energy-efficient edge inference.
Over-the-Air Federated Learning (AirFL) is an emerging paradigm that tightly integrates wireless signal processing and distributed machine learning to enable scalable AI at the network edge. By exploiting wireless superposition over a shared multiple-access channel, AirFL turns simultaneous transmissions of local model updates into an analog aggregate at the receiver, thereby reducing communication latency, bandwidth usage, and energy consumption in wireless aggregation domains. This article develops a design-oriented tutorial view of analog AirFL. We organize existing schemes according to the signal-processing mechanism used to enable AirFL aggregation: transmitter-side channel compensation and power control, receiver-side equalization and high-dimensional processing, or learning-aware aggregation weighting. This viewpoint leads to three representative classes -- CSIT-aware, blind, and weighted AirFL -- and clarifies their assumptions, performance tradeoffs, complexity, and deployment limitations. We further discuss synchronization, digital and hybrid analog-digital realization, and open research directions for integrating AirFL into practical wireless edge-AI systems.
Seyed Mohammad Azimi-Abarghouyi, Carlo Fischione, Kaibin Huang