ZeroTouch: Tactile-Supervised Visual Contact Estimation for Contact-Rich Manipulation

Contact-rich manipulation benefits from tactile feedback, yet physical tactile sensors introduce hardware, calibration, synchronization, and maintenance costs that complicate policy learning and deployment. We formulate predicted touch as an alternative to measured tactile input and present PredTac, a framework that learns to infer tactile states from causal visual observations and robot states and uses the predicted touch as an explicit interface for policy learning and execution. A tactile predictor is first trained with tactile supervision and then used to provide contact information without requiring measured tactile input during downstream policy training or execution. We evaluate PredTac across three contact-rich manipulation tasks in simulation and on a real robot, and further examine how policy performance depends on the predicted contact content. In simulation goal-offset evaluations, predicted-touch policies achieve 27.0%, 52.0%, and 44.7% success on USB, Barbed-spike, and Valve, respectively, improving over the visual baseline by 8.0-13.7 percentage points. On the real robot, predicted-touch ACT achieves 70.0%, 50.0%, and 90.0% success on USB insertion, Barbed extraction, and Valve rotation, respectively, with a three-task mean of 70.0%, approaching measured-touch ACT at 72.2% and substantially outperforming visual ACT at 21.1%. Fixed-policy interventions further show that performance is sensitive to the spatial structure of predicted contact, with spatial rearrangement at fixed value distributions reducing Valve success by 10.7 percentage points. These results demonstrate that predicted touch can provide useful contact information for contact-rich manipulation without requiring tactile sensing as a policy input.

Tactile sensing provides essential contact information for robotic manipulation, yet incorporating it into pretrained vision-language-action (VLA) models remains challenging. A common concern is that simply introducing touch during task-specific fine-tuning may fail to bridge the cross-modal gap, yielding limited gains or even reduced success. Consequently, existing methods often rely on large-scale tactile policy pretraining or separate visuotactile alignment, adding data requirements and training stages. We introduce SimpleTouch, a simple VLA extension that augments $π_{0.5}$ with a tactile expert, to test whether these additional stages are necessary. Leveraging all tokens from a frozen pretrained tactile encoder, the expert learns from action supervision and multi-horizon prediction of future tactile latents. This single-stage training uses only task demonstrations, without additional tactile policy pretraining or separate alignment. With 50 demonstrations per task, SimpleTouch achieves the highest success rate among evaluated methods on all six UniVTAC tasks. Its average success rate reaches 77.5%, compared with 45.2% for FTP-$π_{0.5}$ and 66.7% for FTP-1, corresponding to gains of 32.3 and 10.8 percentage points, respectively. Across four real-world tasks, it averages 71.3%, exceeding FTP-1 by 8.8 percentage points. These results demonstrate that, given pretrained VLA and tactile representations, additional tactile policy pretraining is not a prerequisite for strong performance on these tasks, offering a simpler route to contact-rich manipulation. Project page: https://simpletouch-robot.github.io/

Robots that autonomously determine their actions from language instructions and sensory observations could perform new contact-rich manipulation tasks without task-specific training or hand-designed rules. To perform these tasks, robots must infer how objects contact one another and move as a result, then select actions. For contact inference and action selection, prior approaches involve designing estimation models and tactile feedback control laws, or learning models for object-motion estimation, action-outcome prediction, and action selection from tactile data. Instead, we propose TacZero, which uses a pretrained general-purpose vision-language model (VLM) to interpret visual and tactile observations and select robot actions without additional tactile or manipulation training or task-specific rules for contact interpretation or action selection. TacZero provides the VLM with camera images, robot state, and three-axis tactile responses represented as numerical values or vectors overlaid on the images. From these observations and interaction history, the VLM generates commands specifying target end-effector positions and gripper opening or closing, which a low-level controller executes. In real-world cylindrical-peg insertion experiments, TacZero succeeded in 15 of 20 trials with numerical tactile input, compared with 10 of 20 without tactile input. This study provides a concrete starting point for further research on contact-rich manipulation using general-purpose VLMs and highlights challenges in pursuing this direction.