Contact-rich precision insertion is a key manipulation skill in robotic assembly. Tight clearances make insertion more sensitive to alignment errors and prone to collisions and jamming, while variations in geometry and clearance across parts further complicate policy reuse. We present a reinforcement learning framework that trains insertion policies entirely in simulation for direct deployment without real-world demonstrations or policy fine-tuning. By combining target poses with compact three-dimensional fingertip force feedback, the policy learns to search for alignment and correct its motion despite errors in the estimated hole position. A decoupled gated reward coordinates alignment and insertion. Force-signal smoothing and state-independent standard deviations stabilize the learning process. The resulting policies perform real-world insertion across multiple hole geometries with a minimum nominal clearance of 0.02 mm and improve success while reducing peak contact forces under hole-position errors. Cross-clearance and cross-geometry evaluations further confirm policy generalization. The system achieved the first perfect score of 20/20 on ManipulationNet's peg-in-hole benchmark under its Human-in-the-Loop protocol, with fully autonomous insertion motions. A single policy trained only on a simulated hexagonal insertion task achieved an overall success rate of 95.0% across eight unseen real-world insertion tasks. These results show that learning entirely in simulation can yield precision insertion skills that can be deployed directly and reused across real-world tasks. The project website (https://mzhsoul.github.io/InsertAnything/) provides open-source simulation and real-robot experiment scripts, assets, and trained checkpoints.
High-precision assembly frequently involves tight-tolerance insertions, where even slight pose errors can cause jamming or excessive interaction forces, making robust and safe insertion policies difficult to obtain. This paper proposes a tactile-augmented two-stage method that combines Imitation Learning (IL) and Reinforcement Learning (RL) for precision insertion tasks. In the first stage, IL learns a reaching policy with position generalization that grasps the peg and brings it to the vicinity of the target region. In the second stage, RL executes the insertion and enables recovery from failures during contact-rich interactions. To better exploit tactile feedback, we introduce tactile group sampling to increase coverage of critical contact segments during training, and design a tactile critic to more accurately evaluate policy values, improving insertion performance while maintaining low contact forces. We conduct systematic experiments across five hole geometries and three clearance settings. Results show that our method substantially improves insertion performance across all settings; under the most challenging 0.05,mm clearance, it achieves a 67% success rate while keeping contact forces low, reducing the maximum interaction force by 60% and torque by 44%, thereby validating both effectiveness and safety for precision assembly.
High-precision connector insertion remains challenging for robotic systems due to tight mechanical tolerances, partial observability during contact, and multimodal uncertainty arising from occlusion and contact ambiguity. Successful insertion requires closed-loop contact guidance that continuously integrates global alignment cues with local contact feedback to produce stable corrective actions under interaction. In this work, we present ContactDP (Contact-Guided Diffusion Policy for Tight Insertion Tasks), a multimodal diffusion-policy framework for contact-rich insertion. ContactDP jointly integrates wrist RGB observations, fingertip tactile sensing, and wrist-mounted force-torque measurements to infer contact state and generate temporally consistent corrective motions during insertion. To ensure stable execution under contact, the learned policy operates together with a hybrid position-force controller that provides compliant low-level interaction. We evaluate our approach on a suite of industrial-grade connector insertion tasks with varying connector geometries, grasp conditions, and initial misalignment. Across all tasks, ContactDP significantly outperforms vision-only diffusion policies for performance, reliability and generalization.
Real-world robotic assembly at sub-millimeter tolerances demands spatial precision, compliant interaction, and robustness to contact failures. We present Facet-0, a robotic foundation model that predicts and values the contact consequences of its actions. Facet-0 unifies multimodal representation learning and reinforcement learning (RL) post-training around a joint action-wrench proposal: a causal wrench history is aligned with vision-language semantics and kinematic state, and flow matching generates each action chunk together with the future wrist-wrench profile it is expected to induce. Deployment rollouts train a distributional Action-Wrench Critic to distinguish motions with similar task progress but different contact outcomes, while phase-aware rewards and contact-selective credit concentrate policy improvement on decisive interactions. To accommodate part-specific dynamics, a lightweight bounded actor reuses the frozen representation for on-robot adaptation; RL remains defined over executable Cartesian actions, while an auxiliary wrench head preserves predictive, non-commanded action-contact coupling. Trained on ManuFacet-1K, a 1,000-hour force-synchronized corpus spanning three embodiments and multiple manufacturing cells, the bounded task-adapted system reaches 82% mean success on five sub-millimeter computer-assembly tasks, compared with 15% for the strongest baseline, with 0.5 mm placement accuracy and 50 ms command latency.