Conditional Diffusion Generation of DVL and Inertial Signals for Underwater Navigation

Autonomous Underwater Vehicles (AUVs) rely heavily on the fusion of inertial sensors and Doppler velocity logs (DVLs) for navigation. In standard autonomous navigation systems, the DVL measures four beam velocities, thereby enabling the estimation of the AUV velocity vector. However, during real-world missions, the DVL may receive noisy or incomplete beam measurements due to marine obstacles, seabed reflections, or environmental disturbances. Furthermore, some low-cost underwater platforms operate without inertial sensors to reduce system complexity and cost. In such cases, reliable estimation of the AUV velocity vector in real-world missing beam scenarios becomes challenging, leading to degraded navigation solutions. To circumvent these challenges and enable resilient underwater navigation, we propose DVL-DeepONet, a physics-guided deep neural operator framework along with three variants. The proposed models are designed to estimate DVL-based velocity information under multiple operational scenarios, including (i) noise-resilient estimation in coupled inertial/DVL measurements, (ii) DVL-only learning, and (iii) beam measurement recovery. By learning a nonlinear operator that maps temporal inertial/DVL observations directly to vehicle velocity while enforcing DVL measurement physics through a consistency constraint, the proposed approach enables robust velocity estimation even under degraded sensing conditions. The proposed framework is validated using real-world AUV experiments, comprising a cumulative path length of approximately 10,000 m. Experimental results demonstrate that the proposed DVL-DeepONet architectures outperform baseline model-based approaches and learning-based algorithms by 40%.

Autonomous underwater vehicles (AUVs) commonly rely on inertial navigation systems (INS) aided by Doppler velocity logs (DVLs) for reliable underwater navigation. Accurate DVL velocity estimation is therefore essential for successful operation. Recent learning-based methods have demonstrated improved DVL velocity estimation, particularly under degraded measurement conditions. However, their training objectives typically rely on conventional regression losses that are highly sensitive to large residuals and corrupted observations. Additionally, they do not explicitly account for the physical consistency and measurement uncertainty associated with the underlying sensing process. To address these limitations, this paper introduces navigation-aware loss (NAViLoss), a robust and uncertainty-aware objective function for learning-based AUV velocity estimation. NAViLoss jointly penalizes the velocity-estimation residual in the navigation-state domain and the beam-consistency residual in the DVL measurement domain. Its bounded formulation limits the influence of large residuals, while an adaptive mechanism regulates the uncertainty in beam geometry. Furthermore, NAViLoss is integrated with a DeepONet architecture to form a novel NAVi-DeepONet model for seamless estimation of an underwater vehicle's velocity. Lastly, our model is evaluated using approximately 10,000m of semi-synthetic AUV experimental data collected during multiple real-world sea trials. Experimental results demonstrate a 44% improvement in velocity-estimation accuracy compared with conventional and learning-based baselines. These results demonstrate the effectiveness of navigation-aware and uncertainty-adaptive loss design for robust learning-based underwater velocity estimation.

Autonomous underwater vehicles (AUVs) rely on the fusion of inertial navigation systems (INS) and Doppler velocity logs (DVL) for accurate navigation. Before deployment, this fusion requires a DVL initialization pipeline consisting of two stages: alignment, which estimates the rotation between the INS and DVL frames, and calibration, which estimates the DVL error terms. Conventionally, both stages are solved with model-based algorithms that demand complex vehicle maneuvers, surface-level satellite reference measurements, and simplified error models, making initialization time-consuming, trajectory-dependent, and sensitive to sensor quality. In this work, we propose a fully neural- aided DVL initialization pipeline that replaces both stages with two complementary neural networks: ResAlignNet for alignment and DCNet for calibration. The unified pipeline operates in situ on a single nearly constant-velocity trajectory and uses the same inputs as the model-based baseline. Using real-world data recorded across five distinct sensor error-term combinations, the proposed pipeline reduces the velocity root mean squared error by an average of 68.7% over the model-based baseline, using only 25s of data for initialization.