cs.AINov 6, 2026

PreForceVision: Physics-Guided Optical Estimation of Bolt Preload from Bolt-Head Deformation

Authors: Nehal Afifi, Klaus Rappenecker, Florian Peinhardt, Gerhard Kachel, Alfred Isele, Sven Matthiesen

Organizations: IPEK - Institute of Product Engineering at the Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany · Offenburg University of Applied Sciences, Department of Mechanical and Process Engineering, Offenburg, Germany

Abstract

Bolt preload is a decisive functional quantity in bolted joints because it determines whether external loads are transmitted primarily through frictional clamping or directly through the bolt. Existing preload measurement techniques, including strain-gauge bolts, force washers, ultrasonic methods, and bolt-length measurements, are effective in certain applications but require additional hardware, coupling, calibration, or joint modifications. This limits their scalability for large numbers of standard fasteners and motivates a non-contact optical approach. This paper proposes PreForceVision, a physics-guided optical framework for estimating bolt preload from preload-induced surface deformation of the bolt-head front face. The method treats preload estimation as an inverse deformation-to-force problem, where deformation of the optically accessible bolt-head surface is extracted from reference-loaded image pairs and related to the internal preload state. Preliminary results for an M16 strength class 8.8 bolt show an approximately \SI{12}{\micro\meter} simulated head-face depression at \SI{90}{\kilo\newton}, strain-gauge measurements of comparable magnitude, and an optical 3D measured central depression of approximately \SIrange{10}{20}{\micro\meter}. The contribution is a physics-guided optical methodology combining controlled image-pair acquisition, DIC- or optical-flow-based deformation extraction, multimodal validation, and uncertainty-aware regression for rough preload estimation under controlled conditions.

Figures & tables

Explore similar work

Nov 6, 2026

A Physics-Informed Learning Framework for Linking Microscopic Surface Degradation to Bolted Joint Functional Behavior

Returned products in circular engineering often have heterogeneous degradation histories, making remaining function difficult to assess. For bolted joints, corrosion alters surface morphology, contact, friction, preload retention, and mechanical response. This paper presents a physics-informed multimodal framework for linking microscopic and camera-based degradation observations to functional indicators of corroded bolted joints. The workflow defines the corrosion failure mode, generates synchronized inspection and functional-response records, preprocesses image, roughness, exposure, and joint descriptors, aligns microscopy and camera observations through similarity learning, and constructs a calibrated corrosion-severity field. Partial differential equation (PDE) discovery is applied to this field to identify candidate effective mesoscale laws rather than complete electrochemical mechanisms. The corrosion-evolution model is coupled to a separate functional model, with friction coefficient as the primary target and preload loss included when clamp-force data are available. The contribution is a reproducible pathway for physically constrained assessment of degraded bolted-joint behavior.
Jun 8, 2026

An Opticalmechanics Framework for Dynamic Estimation of Multibody Systems

Conventional dynamics analysis of the human body is often constrained by the need for contact force and torque sensors and controlled laboratory environments. To address this issue, this study proposes an opticalmechanics kinematic-dynamic integrated estimation framework for multibody systems. Specifically, a constrained multibody model is established to describe the system dynamics, while image-measured kinematic quantities are used as non contact inputs for dynamic estimation. The unknown joint torque is then identified through a genetic-algorithm based optimization by minimizing the discrepancy between model-predicted and image-measured kinematic quan tities. Experimental validation on an air-bearing platform showed that the wrist joint torque estimated from image data achieved a mean absolute error of 0.46 Nm compared with sensor measurements. In the forward prediction test, the model-predicted angular velocity achieved a mean absolute error of 0.006 rad/s relative to the image-measured results. This study demonstrates the potential of combining image measurement and mechanical modeling for non-contact dynamic estimation in scenarios where direct force and torque measurement is difficult.
Aug 10, 2026

Learning human joint torques from pixels

Estimating human joint torques from visual observations is a key step toward bringing biomechanical analysis from controlled laboratories to real-world movement scenarios. Existing torque estimation methods typically depend on surface electromyography, motion-capture markers, force plates, or simulated imitation data, which limits their applicability to ordinary RGB images. In this work, we introduce VID, a vision-based inverse dynamics dataset and benchmark for predicting human joint torques directly from real monocular images. VID contains 63,369 synchronized frames with real human images, kinematic annotations, anthropometric attributes, and OpenSim-derived dynamic labels, providing paired visual and biomechanical supervision for real-image inverse dynamics. We further define a standardized evaluation protocol covering overall torque estimation, joint-specific analysis, and action-specific prediction. To establish a strong reference model, we propose VID-Network, which combines pose-pretrained spatial probabilistic features, marker regression, and temporal torque inference to recover joint torques from image sequences. Experiments on VID show that VID-Network achieves an overall mPJE of 1.7612 N⋅\cdotm/kg, improving over the best compared baseline by 39.81%, and obtains the lowest error across all evaluated joint types and most action categories. VID establishes a first practical benchmark for vision-driven human inverse dynamics and provides a foundation for studying biomechanical inference in less constrained environments.