cs.AINov 13, 2026

Causal AI-Driven Secure mmWave Beam Alignment with Defensive Variational Autoencoders

Authors: Nasir Khan, Asmaa Abdallah, Abdulkadir Celik, Ahmed M. Eltawil, Sinem Coleri, Cicek Cavdar

Organizations: School of Electrical Engineering and Computer Science, KTH Royal Institute of Technology, 100 44 Stockholm, Sweden · Computer, Electrical, and Mathematical Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal 23955, Saudi Arabia · School of Electronics and Computer Science, University of Southampton, Southampton SO17 1BJ, U.K. · department of Electrical and Electronics Engineering, Koc University, Istanbul, Turkey

Abstract

Efficient and secure beam alignment is essential for mmWave communication systems. However, existing deep learning (DL)-based beam alignment methods often neglect causal relationships between inputs and outputs, resulting in limited interpretability, poor generalization, and excessive beam sweeping. Moreover, these DL solutions are vulnerable to adversarial attacks, where small perturbations in received power measurements can mislead beam classifiers. To overcome these issues, we propose a causally-aware DL framework integrating causal discovery into beam alignment. A two-stage causal beam selection algorithm learns a Bayesian graph capturing dependencies between received signal strength indicators (RSSI) as inputs and the optimal beam index as the target variable, then uses it to select a minimal set of relevant input features for the DL classifier. To mitigate adversarial attacks, we introduce a defensive variational autoencoder (DVAE) that maps potentially perturbed inputs back to their clean versions. End-to-end fine-tuning of the downstream beam classifier on the DVAE-reconstructed RSSI representations further boosts prediction accuracy. Simulation results show that causal beam selection achieves accuracy comparable to conventional methods while providing an 829×\mathbf{829\times} lower per-sample computational cost than SHAP (Shapley Additive Explanations), a widely used explainable AI (XAI)-based feature selection method. It further reduces beam-sweeping overhead by 59.4%\mathbf{59.4\%} and 89.8%\mathbf{89.8\%}, compared to conventional DL-based beam selection and exhaustive search, respectively. The DVAE-based defense effectively denoises adversarial inputs, sustaining 85% accuracy across different perturbation bounds, retains baseline performance on unperturbed RSSI inputs and surpasses defensive distillation defense scheme by 15--20% on average under different attack scenarios.

Figures & tables

Explore similar work

Oct 31, 2026

Digital Twin-Assisted Fast Beam Alignment for mmWave MIMO Networks

Millimeter-wave (mmWave) communication relies on directional beam sweeping for initial access, which incurs substantial latency and signaling overhead as antenna arrays grow large and deployments become denser. Machine-learning-based beam prediction can reduce this overhead, but its effectiveness depends on training data that accurately reflects the deployment environment, a requirement that is difficult to meet in practice. This paper presents a latency-aware beam management architecture that integrates digital-twin-assisted prediction, regionbased localization, weighted ensemble learning, and explainability-driven beam pruning into a unified framework. A digital twin (DT) generates site-specific ray-traced channel knowledge offline, enabling environment-aware beam prediction without exhaustive real-world measurements and supporting both initial access and beam tracking. The proposed ensemble learning scheme combines a base classifier and a specialist classifier through reliability-weighted fusion to improve prediction accuracy and robustness, while explainable artificial intelligence (XAI)-based attribution pruning reduces the beam codebook to a small subset of the most informative beams for beam allocation. To capture the distributional mismatch between the DT and real-world environments: the network was trained on imperfect digital-twin data but evaluated on real-world surrobase data. Results show that the proposed method achieves 96.80% top-1 and 98.36% top-3 beam prediction accuracy, while reducing over-the-air sounding overhead by nearly an order of magnitude relative to exhaustive sweeping, outperforming convolutional and deep neural network baselines from prior work.
Mar 30, 2026

Diffusion-Based Generative Priors for Efficient Beam Alignment in Directional Networks

Beam alignment is a key challenge in directional mmWave and THz systems, where narrow beams require accurate yet low-overhead training. Existing learning-based approaches typically predict a single beam and do not quantify uncertainty, limiting adaptive beam sweeping. We recast beam alignment as a generative task and propose a conditional diffusion model that learns a probabilistic beam prior from compact geometric and multipath features. The learned priors guide top-kk sweeps and capture the SNR loss induced by limited probing. Using a ray-traced DeepMIMO scenario with an 8-beam DFT codebook, our best conditional diffusion model achieves strong ranking performance (Hit@1 ≈0.61\approx 0.61, Hit@3 ≈0.90\approx 0.90, Hit@5 ≈0.97\approx 0.97) while preserving SNR at small sweep budgets. Compared with a deterministic classifier baseline, diffusion improves Hit@1 by about 180%. Results further highlight the importance of informative conditioning and the ability of diffusion sampling to flexibly trade accuracy for computational efficiency. The proposed diffusion framework achieves substantial improvements in small-kk Hit rates, translating into reduced beam training overhead and enabling low-latency, energy-efficient beam alignment for mmWave and THz systems while preserving received SNR.
Jul 1, 2026

Meta-Transfer Learning for mmWave Beam Alignment

Millimeter-wave (mmWave) beam alignment is critical for next-generation wireless systems, but existing approaches either update all parameters during adaptation or restrict updates to a subset of layers without adapting intermediate feature representations. We propose MTL-BA, a meta-transfer learning framework for multiple-input single-output (MISO) beam alignment that freezes a pre-trained convolutional backbone and meta-learns lightweight Scale-and-Shift (SS) adapters and a classifier head. Under an outdoor-to-indoor shift in DeepMIMO, MTL-BA achieves the highest Top-1 accuracy among the evaluated methods at 35 dB while updating 17×17\times fewer parameters than full fine-tuning and meta-training 6×6\times faster than MAML.