Mixed-Precision Quantization

Overview

Mixed-precision quantization studies how to use more bits for parts of a model that are sensitive to numerical error and fewer bits elsewhere, reducing storage and computation while preserving useful behavior. Common approaches include post-training quantization and quantization-aware training, with precision chosen using calibration data, sensitivity measures such as Hessian or KL-based scores, or budgeted search methods such as knapsack optimization and reinforcement learning. The work spans LLM weights and KV caches, mixture-of-experts, diffusion models, and edge devices, and is evaluated on measures such as perplexity, reasoning accuracy, image quality, latency, and energy use. A central challenge is that sensitivity estimates and average bit budgets do not always predict end-to-end quality or real hardware speed, so allocations must be validated against the target workload and device.

Latest papers

189 papers25 papers in the last four weeks, down 17% on the four weeks before. 0.2% of all new papers.

Feb 21, 2026

UFO: Unlocking Ultra-Efficient Quantized Private Inference with Protocol and Algorithm Co-Optimization

Private convolutional neural network (CNN) inference based on secure two-party computation (2PC) suffers from high communication and latency overhead, especially from convolution layers. In this paper, we propose UFO, a quantized 2PC inference framework that jointly optimizes the 2PC protocols and quantization algorithm. UFO features a novel 2PC protocol that systematically combines the efficient Winograd convolution algorithm with quantization to improve inference efficiency. However, we observe that naively combining quantization and Winograd convolution faces the following challenges: 1) From the inference perspective, Winograd transformations introduce extensive additions and require frequent bit width conversions to avoid inference overflow, leading to non-negligible communication overhead; 2) From the training perspective, Winograd transformations introduce weight outliers that make quantization-aware training (QAT) difficult, resulting in inferior model accuracy. To address these challenges, we co-optimize both protocol and algorithm. 1) At the protocol level, we propose a series of graph-level optimizations for 2PC inference to minimize the communication. 2) At the algorithm level, we develop a mixed-precision QAT algorithm based on layer sensitivity to optimize model accuracy given communication constraints. To accommodate the outliers, we further introduce a 2PC-friendly bit re-weighting algorithm to increase the representation range without explicitly increasing bit widths. With extensive experiments, UFO demonstrates 11.7x, 3.6x, and 6.3x communication reduction with 1.29%, 1.16%, and 1.29% higher accuracy compared to state-of-the-art frameworks SiRNN, COINN, and CoPriv, respectively.
Feb 2, 2026

Dynamic Mixed-Precision Routing for Efficient Multi-step LLM Interaction

Large language models (LLMs) achieve strong performance in long-horizon agentic tasks through multi-step interaction and reasoning at test time. However, repeatedly invoking these models incurs substantial inference cost over an episode. Post-training quantization (PTQ) reduces this cost, but using a fixed low precision throughout an episode can sharply lower task success. We observe that interaction steps differ sharply in their sensitivity to quantization: given the same context, decoding a step at low precision turns a success into a failure at only about 1% of the steps, which we call critical steps. Based on this observation, we propose Dynamic Mixed-Precision Routing (DMR), a framework that adaptively selects between high-precision and low-precision versions of the same LLM at each decision step. Leveraging an entire-space factorization to jointly predict a step's divergence and its effect on the outcome, DMR learns to recognize these critical steps by training only a lightweight router on the model's hidden state. By reusing a shared high-precision KV cache and the hidden states, DMR avoids redundant context prefill and a separate text encoder, enabling precision switching with less than 1 ms of overhead per step and adding less than 0.11% to step latency for routing. This mixed-precision design also enables nested quantization, reducing the memory footprint by 39% on average compared with FP16. Across three long-horizon agentic benchmarks with nested quantization, DMR achieves an average 2.44x decode speedup over FP16 at comparable task success rates, without fine-tuning the underlying model. On ALFWorld with GPTQ, DMR achieves a 1.71x decode speedup with 86.9% success, compared with 87.2% for FP16.
Dec 8, 2025

Towards Training-free Automatic Proxy Discovery via Large Language Models for Mixed Precision Quantization

Mixed-Precision Quantization (MPQ) liberates Deep Neural Networks (DNNs) from the Out-Of-Memory (OOM) bottleneck and has garnered increasing research attention. However, conventional methods either rely on costly differentiable optimization search, which is neither efficient nor flexible, or learn a quantized DNN from a proxy (e.g., HAWQ) manually designed by human experts, which is labor-intensive and requires extensive expert knowledge. Can we design a proxy without involving any human experts or training? In this paper, we provide an affirmative answer by proposing a novel Large Language Model (LLM)-driven Training-free Automatic Proxy (dubbed TAP) discovery framework. It reforms the design paradigm of MPQ by utilizing LLMs and evolutionary search strategies to automatically find superior TAP tailored for MPQ. In addition, to bridge the gap between black-box LLMs and the challenging MPQ task, we introduce a lightweight Direct Preference Optimization (DPO)-based strategy controller that dynamically reweights the selection probabilities of the three prompt templates for evolutionary search strategies according to fitness signals, without fine-tuning the LLM. This forms a task-aware feedback loop that improves proxy generation across evolutions. Extensive experiments on mainstream benchmarks demonstrate that TAP achieves state-of-the-art performance. Finally, we believe that our TAP will significantly contribute to the MPQ community by providing a new perspective on LLM-driven design algorithms.
Nov 19, 2025

Dynamic Expert Quantization for Scalable Mixture-of-Experts Inference

Mixture-of-Experts (MoE) has become a practical architecture for scaling LLM capacity while keeping per-token compute modest, but deploying MoE models on a single, memory-limited GPU remains difficult because expert weights dominate the HBM footprint. Existing expert offloading and prefetching systems reduce the resident set, yet they often pay expert-loading costs on the critical path when activation becomes dense. Post-training quantization (PTQ) lowers the footprint without transfers, but prevailing pipelines fix expert bit-widths offline and assume routing remains stable, even though MoE expert utilization is heavy-tailed and the hot set can shift across workloads. We present DynaExq, a runtime-aware mixed-precision serving system that treats single-GPU MoE inference under a hard HBM envelope as an online, budget-constrained precision allocation problem. The key insight is to keep the experts that dominate runtime traffic resident at higher precision, while maintaining a low-precision fallback for the remaining experts, so the system can reduce transfer volume and avoid the waiting latency that limits offloading and prefetching under dense activation. DynaExq estimates long-horizon expert hotness from router traces, selects a per-layer high-precision resident set via a budget-feasible top-nn rule, and applies promotions and demotions asynchronously through stable expert handles so the forward pass always executes on a fully materialized expert version. Across Qwen3-MoE-30B/80B and six benchmarks, DynaExq improves accuracy over static PTQ on Qwen3-80B (73.09% to 77.57%) under comparable device-memory budgets and achieves up to 2.73x higher throughput than offloading/prefetch baselines at batch size 32.
Nov 9, 2025

You Had One Job: Per-Task Quantization Using LLMs' Hidden Representations

Many LLM applications require only narrow capabilities, yet standard post-training quantization (PTQ) methods allocate precision without considering the target task. This can waste bits on layers that are less relevant to the task signal while over-compressing layers that are critical for downstream behavior. We propose Task-Aware Quantization (TAQ), a training-free, weight-only mixed-precision PTQ framework that uses a small set of unlabeled task calibration prompts to allocate higher precision to task-relevant transformer layers under a fixed bit budget. TAQ estimates layer importance from hidden representations and output sensitivity, and we instantiate it with three scoring rules: TAQ-IS, based on activation information and stability; TAQ-KL, based on output-distribution sensitivity under a quantization-noise proxy; and TAQ-O, a label-informed oracle diagnostic for analyzing layer sensitivity. Across several benchmarks, TAQ outperforms task-agnostic baselines such in most settings, with especially strong gains in the accuracy--memory ratio. We further validate that these gains translate to real deployment behavior through hardware throughput and latency measurements, and analyze calibration robustness and residual-stream error propagation. Overall, TAQ turns mixed-precision PTQ from a model-centric compression step into a task-conditioned precision-allocation problem. A reference implementation is available at \includegraphics[height=1em]{imgs/github-mark.png}.
Oct 5, 2025

QuantDemoire: Quantization with Outlier Aware for Image Demoiréing

Demoiréing aims to remove moiré artifacts that often occur in images. While recent deep learning-based methods have achieved promising results, they typically require substantial computational resources, limiting their deployment on edge devices. Model quantization offers a compelling solution. However, directly applying existing quantization methods to demoiréing models introduces severe performance degradation. The main reasons are distribution outliers and weakened representations in smooth regions. To address these issues, we propose QuantDemoire, a post-training quantization framework tailored to demoiréing. It contains two key components. First, we introduce an outlier-aware quantizer to reduce errors from outliers. It uses sampling-based range estimation to reduce activation outliers and keeps a few extreme weights in FP16 with negligible cost. Second, we design a frequency-aware calibration strategy. It emphasizes low- and mid-frequency components during fine-tuning, which mitigates banding artifacts caused by low-bit quantization. Experiments validate that our QuantDemoire achieves large reductions in parameters and computation while maintaining quality. Meanwhile, it outperforms existing quantization methods by over 4 dB on W4A4. We implement a CUDA kernel for the mixed-precision branch and achieve a 2.3×\times end-to-end speedup on an RTX 4090 GPU. Code is released at: https://github.com/zhengchen1999/QuantDemoire.
Sep 28, 2025

LUQ: Layerwise Ultra-Low Bit Quantization for Multimodal Large Language Models

Large Language Models (LLMs) with multimodal capabilities have revolutionized vision-language tasks, but their deployment often requires huge memory and computational resources. Post-training quantization (PTQ) has successfully compressed language models to as low as 1-bit precision, its effectiveness for multimodal LLMs (MLLMs) remains unexplored. In this paper, we present the first method for ultra-low-bit (<4-bit) quantization of MLLMs. Our analysis reveals that multimodal tokens and intermediate layer activations produced by them exhibit significantly higher entropy compared to text tokens, indicating greater functional complexity that makes MLLMs less tolerant to ultra-low bit quantization. However, this entropy varies significantly across layers, with some layers producing lower-entropy activation distributions that we empirically show can better tolerate ultra-low bit quantization. Existing PTQ methods optimize weight quantization within each layer but apply the same target precision uniformly, ignoring this variation in complexity across layers. Building on this insight, we propose LUQ: Layerwise Ultra-Low Bit Quantization, which characterizes each transformer layer's functional complexity via its output activation entropy and selectively applies ultra-low bit quantization to layers encoding simpler, more compressible functions. We also show that multimodal calibration (image and text tokens) boosts VQA performance in the ultra-low bit regime. Evaluated on LLaVA-1.5 and Qwen-2.5-VL across 9 VQA benchmarks, LUQ models use 40% and 31% less memory than their 4-bit counterparts while exhibiting less than 10% degradation on MME.
Sep 22, 2025

On-the-Fly Adaptation to Quantization: Configuration-Aware LoRA for Efficient Fine-Tuning of Quantized LLMs

As increasingly large pre-trained models are released, deploying them on edge devices for privacy-preserving applications requires effective compression. Recent works combine quantization with the fine-tuning of high-precision LoRA adapters, which can substantially reduce model size while mitigating the accuracy loss from quantization. However, edge devices have inherently heterogeneous capabilities, while performing configuration-wise fine-tuning for every quantization setting is computationally prohibitive. In this paper, we propose CoA-LoRA, a method that dynamically adjusts the LoRA adapter to arbitrary quantization configurations (i.e., the per-layer bit-width choices of a pre-trained model) without requiring repeated fine-tuning. This is accomplished via a configuration-aware model that maps each configuration to its low-rank adjustments. The effectiveness of this model critically depends on the training configuration set, a collection of configurations chosen to cover different total bit-width budgets. However, constructing a high-quality configuration set is non-trivial. We therefore design a Pareto-based configuration search that iteratively optimizes the training configuration set, yielding more precise low-rank adjustments. Our experiments demonstrate that, unlike the state-of-the-art methods that require fine-tuning a separate LoRA adapter for each configuration, CoA-LoRA incurs no additional time cost while achieving comparable or even superior performance to those methods.
Jul 24, 2025

Squeeze10-LLM: Squeezing LLMs' Weights by 10 Times via a Staged Mixed-Precision Quantization Method

Deploying large language models (LLMs) is challenging due to their massive parameters and high computational costs. Ultra low-bit quantization can significantly reduce storage and accelerate inference, but extreme compression (i.e., mean bit-width <= 2) often leads to severe performance degradation. To address this, we propose Squeeze10-LLM, effectively "squeezing" 16-bit LLMs' weights by 10 times. Specifically, Squeeze10-LLM is a staged mixed-precision post-training quantization (PTQ) framework and achieves an average of 1.6 bits per weight by quantizing 80% of the weights to 1 bit and 20% to 4 bits. We introduce Squeeze10LLM with two key innovations: Post-Binarization Activation Robustness (PBAR) and Full Information Activation Supervision (FIAS). PBAR is a refined weight significance metric that accounts for the impact of quantization on activations, improving accuracy in low-bit settings. FIAS is a strategy that preserves full activation information during quantization to mitigate cumulative error propagation across layers. Experiments on LLaMA and LLaMA2 show that Squeeze10-LLM achieves state-of-the-art performance for sub-2bit weight-only quantization, improving average accuracy from 43% to 56% on six zero-shot classification tasks--a significant boost over existing PTQ methods.