Physics-Informed Neural Operators

Scaling Scientific Machine Learning (SciML) toward universal foundation models is bottlenecked by negative transfer: the simultaneous co-training of disparate partial differential equation (PDE) regimes can induce gradient conflict, unstable optimization, and plasticity loss in dense neural operators. In particular, broadband open-channel fluid dynamics and boundary-dominated porous media flows impose incompatible spectral and geometric demands on a single dense parameter path. We introduce Shodh-MoE, a sparse-activated latent transformer architecture for multi-physics transport. Shodh-MoE operates on compressed 16^3 physical latents produced by a physics-informed autoencoder with an intra-tokenizer Helmholtz-style velocity parameterization, restricting decoded states to divergence-free velocity manifolds. The model guarantees exact mass conservation, achieving a physically verifiable velocity divergence of ~2.8 x 10^-10 (evaluated post-hoc in FP64) on 128^3 grids. A Top-1 soft-semantic router dynamically assigns localized latent patches to expert subnetworks, enabling specialized parameter paths for distinct physical mechanisms while preserving shared experts for universal symmetries. In a 20,000-step distributed pretraining run over mixed three-dimensional physical tensors, routing telemetry shows autonomous domain bifurcation: held-out validation tokens from the open-channel domain route exclusively to Expert 0, while porous-media tokens route exclusively to Expert 1. The model converges simultaneously across both regimes, achieving latent validation MSEs of 2.46 x 10^-5 and 9.76 x 10^-6, and decoded physical MSEs of 2.48 x 10^-6 and 1.76 x 10^-6. These results support sparse expert routing as a practical architectural mechanism for mitigating multi-physics interference in universal neural operators.

Partial differential equations (PDEs) govern diverse physical phenomena, yet high-fidelity numerical solutions are computationally expensive and Machine Learning approaches lack generalization. While Scientific Foundation Models (SFMs) aim to provide universal surrogates, typical encoding-decoding approaches suffer from high pretraining costs and limited interpretability. In this paper, we propose Compositional Neural Operators (CompNO) for 2D systems, a framework that decomposes complex PDEs into a library of Foundation Blocks. Each block is a specialized Neural Operator pretrained on elementary physics. This modular library contains convection, diffusion, and nonlinear convection blocks as well as a Poisson Solver, enabling the framework to address the pressure-velocity coupling. These experts are assembled via an Adaptation Block featuring an Aggregator. This aggregator learns nonlinear interactions by minimizing data loss and physics-based residuals driven from governing equations. The proposed approach has been evaluated on the Convection-Diffusion equation, the Burgers' equation, and the Incompressible Navier-Stokes equation. Our results demonstrate that learning from elementary operators significantly improves adaptability, enhances model interpretability and facilitates the reuse of pretrained blocks when adapting to new physical systems.

jNO (jax Neural Operators) is a JAX-native library for neural operators and foundation models with unified support for both data-driven and physics-informed training. Its core design is a tracing system in which domains, model calls, residuals, supervised losses, and diagnostics are written in one symbolic language and compiled into one optimization pipeline. This allows users to move between operator regression, mesh-aware residual evaluation, and PDE-constrained training without restructuring the surrounding code. jNO also supports multi-model compositions, fine-grained control at parameter level (model, optimizer, and learning rate), hyperparameter tuning, and JAX-native workflows for translated PDE foundation-model families. The source repository is available at https://github.com/FhG-IISB/jNO.

Neural operators have emerged as powerful data-driven solvers for PDEs, offering substantial acceleration over classical numerical methods. However, existing transformer-based operators still face critical challenges when modeling PDEs on complex geometries: directly processing over massive mesh points is computationally expensive, while operating in raw discretization coordinates may obscure the intrinsic geometry where physical interactions are more naturally expressed. To address these limitations, we introduce the Charted Axial Transformer Operator (CATO), a geometry-adaptive and derivative-aware neural operator for PDEs on general geometries. Instead of applying attention directly in the physical coordinate system, CATO learns a continuous latent chart that maps mesh coordinates into a learned chart space, where chart-conditioned axial attention efficiently captures long-range dependencies with reduced computational cost. In addition, CATO introduces a derivative-aware physics loss for steady-state PDEs that jointly supervises solution values, mesh-consistent gradients, and an auxiliary flux-like field, improving physical fidelity and reducing oversmoothing. We further provide a theoretical approximation result showing that, under a favorable chart, charted axial attention can represent low-rank axial solution operators with controlled error, and that small chart perturbations induce bounded approximation degradation. CATO achieves the best performance across all evaluated datasets, yielding an average improvement of approximately 26.76% over the strongest competing baselines while reducing the number of parameters by 81.98%. These results highlight the effectiveness of learning geometry-adaptive charts and derivative-aware physical supervision for accurate and efficient PDE operator learning.

Physics-informed operator learning is an attractive candidate for surrogate modeling of microstructures, especially in multiscale finite-element simulations. Its practical use, however, is often limited by the high cost of loss evaluation. We address this bottleneck by combining the Equilibrium Neural Operator (EquiNO) with the QR-based discrete empirical interpolation method (Q-DEIM). EquiNO learns only the modal coefficients of reduced displacement-fluctuation and first Piola-Kirchhoff stress representations built from periodic and divergence-free bases, thereby enforcing periodicity and mechanical equilibrium by construction. Q-DEIM then identifies a small set of spatial points through a column-pivoted QR factorization of the stress basis and restricts constitutive evaluations during training to these points alone. This makes full-batch second-order optimization practical for three-dimensional representative volume elements (RVEs). Homogenized first Piola-Kirchhoff stresses are recovered directly from the offline-averaged reduced stress modes, without the need to reconstruct the full stress field at inference time. We validate the framework on two three-dimensional finite-strain hyperelastic RVEs. Q-DEIM reduces the per-step training cost by roughly three orders of magnitude relative to full-field loss evaluation, while reduced homogenization achieves speed-up factors of order $10^3$ to $10^4$ over direct full-field computations. Despite relying on only a small number of offline snapshot loading paths for basis construction, the method accurately interpolates and extrapolates both microscopic stress fields and homogenized stresses, with prediction quality improving systematically as more snapshots are added.

Neural operators generally demonstrate strong predictive performance on in-distribution (ID) problems. However, a critical limitation of existing methods is their significant performance degradation when encountering out-of-distribution (OOD) data. To address this issue, this work introduces continual learning into physics-informed neural operators, with particular emphasis on neural operators built upon the Transolver architecture, and proposes a simple yet effective replay-based continual learning strategy. The proposed method is fully physics-informed and does not require labeled data, relying solely on input fields together with physical constraints for training. When new OOD data become available, a small number of past data are incorporated through a distillation-based constraint to preserve previously acquired knowledge and alleviate catastrophic forgetting. Meanwhile, a transfer learning LoRA is employed to enable rapid adaptation to the new data. The proposed framework is systematically validated on three representative physical problems, including the Darcy flow problem in fluid mechanics, a two-dimensional hyperelastic brain tumor problem in biomechanics, and a three-dimensional linear elastic Triply Periodic Minimal Surfaces problem in solid mechanics. The results demonstrate that the proposed method effectively mitigates catastrophic forgetting on previously learned data while maintaining fast adaptability to new data. Compared with conventional joint training strategies, the proposed method significantly improves training efficiency while reducing additional memory usage and computational cost.

This paper deals with solving the 2D Helmholtz equation on non-parametric domains, leveraging a physics-informed neural operator network based on the DeepONet framework. We consider a 2D square domain with an inclusion of arbitrary boundary geometry at its center. This inclusion acts as a scatterer for an incoming harmonic wave. The aim is to learn the operator linking the geometry of the scatterer to the resulting scattered field. A signed distance function to the boundary of the inner inclusion, evaluated at several points in the domain, is used to encode its geometry. It serves as input for the branch part of the DeepONet architecture, while local information is used as input for the trunk part. This approach enables the encoding of arbitrary geometries, whether they are parameterized or not. The evaluation of the model on unseen geometries is compared with its finite element method (FEM) equivalent to test its generalization capabilities. The trained network weights implicitly embed the local physics and their interaction with the domain geometry. If the training space sufficiently covers the target evaluation space, the model can generalize accordingly. Furthermore, it can be refined to extend to another region of interest without retraining from scratch. This framework also avoids the need to remesh the domain for each geometry. The proposed approach delivers a computationally lighter surrogate model than FEM alternatives and avoids relying on FEM-generated training data.

Physics-Informed Neural Networks have become a powerful mesh-free method for solving partial differential equations, but their performance is often limited by spectral bias. Specifically, in standard MLPs used in PINNs, the global parameter coupling causes the model to prioritize learning low-frequency components, resulting in slow convergence for high-frequency details. To overcome this limitation, we introduce the Physics-Informed Local Implicit Representation (PILIR). Our approach separates the global physical domain into a discrete latent feature space and a continuous generative decoder. By using a learnable grid to encode explicit spatial locality, PILIR can capture high-frequency details locally, preventing dilution by global patterns. A generative neural operator then synthesizes these local latent features into continuous physical fields, allowing accurate reconstruction of fine-scale structures. Experiments on a range of challenging PDEs show that PILIR effectively mitigates spectral bias, thereby boosting the convergence of high-frequency details and achieving superior accuracy compared to state-of-the-art methods.

General-relativistic magnetohydrodynamic (GR-MHD) simulations are essential for studying black hole accretion, relativistic jets, and magnetic reconnection, yet their computational cost severely limits systematic parameter exploration. We investigate neural operator surrogates for two astrophysically relevant simulation scenarios produced by the Black Hole Accretion Code (\texttt{BHAC}). First, a Physics Informed Fourier Neural Operator (PINO) is trained on the special-relativistic resistive MHD (SRRMHD) evolution of the Orszag-Tang vortex over a range of resistivities spanning the Sweet-Parker and fast reconnection regimes. By embedding the governing equations as an additional loss term evaluated at finer temporal resolution than the available data supervision, the model learns dynamics at time steps where no simulation data is provided, enabling recovery of plasmoid formation that a data-only baseline trained on the same sparse snapshots fails to reproduce. To our knowledge, the present work is the first application of a physics informed neural operator to special relativistic resistive MHD, and the first to investigate the capability of such models to resolve plasmoid formation in SRRMHD. In a second line of investigation, an OFormer-style Transformer Neural Operator is trained on the evolution of spine-sheath relativistic jets created with \texttt{BHAC}, in special-relativistic MHD (SRMHD). The model is directly applied on the adaptive mesh, highlighting the need for linear attention due to long sequences. The neural surrogate model is capable of capturing most of the major details, especially in early predictions. To our knowledge, this constitutes the first application of a neural operator directly on a high resolution adaptive mesh refinement grid in the context of MHD simulations.

Spreading of liquid droplets on solid substrates constitutes a classic multiphysics problem with widespread applications ranging from inkjet printing, spray cooling, to biomedical microfluidic systems. Yet, accurate computational fluid dynamic (CFD) simulations are prohibitively expensive, taking more than 18 to 24 hours for each transient computation. In this paper, Physics-Informed Laplace Operator Neural Network (PI-LNO) is introduced, representing a novel architecture where the Laplace integral transform function serves as a learned physics-informed functional basis. Extensive comparative benchmark studies were performed against five other state-of-the-art approaches: UNet, UNet with attention modules (UNet-AM), DeepONet, Physics-Informed UNet (PI-UNet), and Laplace Neural Operator (LNO). Through complex Laplace transforms, PI-LNO natively models the exponential transient dynamics of the spreading process. A TensorFlow-based PI-LNO is trained on multi-surface CFD data spanning contact angles $θ_s ε[20,160]$, employing a physics-regularized composite loss combining data fidelity (MSE, MAE, RMSE) with Navier-Stokes, Cahn-Hilliard, and causality constraints.

The multi-scale and non-linear nature of phase-field models of solidification requires fine spatial and temporal discretization, leading to long computation times. This could be overcome with artificial-intelligence approaches. Surrogate models based on neural operators could have a lower computational cost than conventional numerical discretization methods. We propose a new neural operator approach that bridges classical convex-concave splitting schemes with physics-informed learning to accelerate the simulation of phase-field models. It consists of a Deep Ritz method, where a neural operator is trained to approximate a variational formulation of the phase-field model. By training the neural operator with an energy-splitting variational formulation, we enforce the energy dissipation property of the underlying models. We further introduce a custom Reaction-Diffusion Neural Operator (RDNO) architecture, adapted to the operators of the model equations. We successfully apply the deep learning approach to the isotropic Allen-Cahn equation and to anisotropic dendritic growth simulation. We demonstrate that our physically-informed training provides better generalization in out-of-distribution evaluations than data-driven training, while achieving faster inference than traditional Fourier spectral methods.