eess.IVApr 10, 2025

Physics-Aware Zero-Shot Learning for Low-Dose CT from a Single Sinogram

Authors: Yongyi Shi, Siming Lu, Yongfeng Gao, Hao Zhang, Hengyong Yu, Ge Wang

Organizations: Department of Biomedical Engineering, Rensselaer Polytechnic Institute (RPI), Troy, NY, USA

Abstract

Low-dose computed tomography (CT) imaging remains a persistent challenge, especially under heterogeneous acquisition conditions. Zero-shot learning, which enables models to learn directly from individual images without external supervision, represents a compelling approach to mitigate distribution mismatches arising from variations in scanner hardware, imaging protocols, and patient demographics. However, most existing zero-shot approaches employ down-sampling operations that reduce spatial resolution and cause domain shifts, which become particularly evident when applied to raw sinogram data. Here, we propose a physics-aware zero-shot CT denoising framework to exploit the conjugate symmetry property intrinsic to CT sinograms. Conjugate X-ray pencil beams traverse identical anatomical paths and ideally yield the same expected attenuation values but with independent noise realizations. By randomly mapping sinogram values between conjugate-ray pairs, we synthesize structurally consistent yet noise-diverse sinogram pairs, enabling self-supervised network training without external data. The resulting lightweight denoising network demonstrates strong generalization across low-dose simulation, clinical helical CT, and preclinical photon-counting CT datasets. Quantitative and qualitative results demonstrate competitive denoising performance, with favorable noise suppression and structural preservation across diverse acquisition settings. This work establishes a generalizable and data-efficient paradigm for CT denoising that integrates physical redundancy into learning-based image reconstruction. The code for the proposed method is openly available at: https://github.com/shiyongyi/Physics-Aware-Zero-Shot-CT-Sinogram-Denoising

Explore similar work

May 11, 2026

FrequencyCT: Frequency Domain Self-supervised Low-dose CT Denoising

Despite extensive research on computed tomography (CT) denoising, few studies exploit projection-domain data characteristics to mitigate noise correlation. To bridge this gap, this work proposes FrequencyCT, the first zero-shot self-supervised method for pseudo-sample generation in the frequency domain for low-dose CT denoising. Specifically, by exploiting the distinct frequency-domain distributions of noise and true signal, a regional low-frequency anchoring technique is proposed. Applying phase-preserving noise and mask perturbations to the high-frequency region generates pseudo-samples for self-supervision. Driven by the exponential correlation between noise variance of noisy projections and the underlying true signal, consistent data truncation is applied to the generated samples to stabilize optimization gradients. Evaluation results on multiple public and real datasets confirm the clinical application potential of this research, which provides an innovative perspective for the field of denoising. The code is available at: https://github.com/yqx7150/FrequencyCT.
Sep 1, 2026

Physics-Driven Independent Pair Generation for Iterative Self-Supervised Low-Dose CT Denoising

Low-dose computed tomography (LDCT) measurements contain mixed Poisson-Gaussian noise. However, most self-supervised methods rely on generic image statistics and do not explicitly model this noise, which may limit their ability to effectively suppress realistic LDCT noise. To address this issue, we propose a physics-driven framework with cross-domain iteration for self-supervised LDCT denoising. The proposed framework proceeds in three main steps. First, a learned sinogram prior and the LDCT noise model guide posterior inference of photon counts, enabling separation of the Poisson and Gaussian components. Second, the separated Poisson and Gaussian components are respectively processed by binomial thinning and Gaussian data thinning to construct two branches, and residual scaling matches each branch's noise level to that of the observation, yielding a training pair with approximately independent noise realizations from one low-dose measurement. Finally, the pair is used to train an image-domain network whose forward-projected outputs update the prior. Through cross-domain iteration, the prior and the training pair are progressively refined while maintaining consistency with CT acquisition physics. Experiments on simulated data from AAPM, LIDC-IDRI, and LoDoPaB-CT and on real LDCT data show consistent gains over the evaluated self-supervised baselines across dose levels, with performance comparable to the evaluated supervised baseline.
Aug 11, 2026

Efficient Noise Context-Aware Representation for Low-Dose CT Denoising

While deep learning-based denoising has become widely adopted in low-dose CT, conventional models use generic architectures designed for natural images, failing to account for non-stationary and spatially correlated CT noise characteristics. To address this, we propose an Efficient Noise COntext-aware REpresentation (ENCORE) framework that explicitly leverages CT noise characteristics and anatomical features. First, we reformulate the noise synthesis procedure based on a realistic noise distribution beyond the conventional Gaussian approximation, establishing a rigorous foundation for training pair generation. Next, we extract local noise power and correlation contexts to guide the denoising process. To fully leverage the potential of noise context, we propose a FlyingConv module, which adaptively changes convolution weights for each local image region. Notably, our approach demonstrates substantial gains in both denoising quality and computational efficiency. Furthermore, manipulating the intensity of the noise context maps at inference time enables zero-shot conditional denoising, allowing for dynamic control over the output image texture. The entire pipeline is available at https://github.com/minwoo-yu/ENCORE.git