Energy Overhead in Sensor Nodes: Embedded Machine Learning and Data Offloading via Low Power Wide Area Networks

The rapid growth of the satellite industry has driven a significant increase in geospatial data acquisition, highlighting a critical bottleneck: the severe disparity between the volume of collected sensor data and the limited downlink bandwidth available to ground stations. While On-Board Computing (OBC) has helped address this by pre-processing data in orbit, this article further advances the paradigm by introducing an in-sensor computing framework. We present an optimized end-to-end Earth Observation (EO) pipeline tailored for strict computational constraints by integrating TinyML techniques with the Sony IMX500 Intelligent Vision Sensor. Specifically, our approach shifts processing directly to the sensor level, offloading the computation from the primary embedded device, and effectively mitigating the downlink transmission of noisy or irrelevant data. We evaluated several efficient Convolutional Neural Networks (ConvNets), i.e., SqueezeNet, ShuffleNetV2, and MCUNetV1, on the EuroSAT dataset. Experimental results show that, despite the optimizations required for deployment on the IMX500 platform, our models maintain a competitive 96.68% accuracy while operating within its 8 MB constraints. Specifically, the models reach an average processing throughput of 17.40 FPS with a latency of 27.43 ms. Furthermore, our system profile exhibits high energy efficiency, with a low energy footprint of 14.19 mJ per inference and an efficiency rating of 42.26 GMAC/J, demonstrating its viability for in-sensor deployment.

Earth observation (EO) missions traditionally rely on transmitting raw or minimally processed imagery from satellites to ground stations for computationally intensive analysis. This paradigm is infeasible for CubeSat systems due to stringent constraints on the onboard embedded processors, energy availability, and communication bandwidth. To overcome these limitations, the paper presents a TinyML-based Convolutional Neural Networks (ConvNets) model optimization and deployment pipeline for onboard image classification, enabling accurate, energy-efficient, and hardware-aware inference under CubeSat-class constraints. Our pipeline integrates structured iterative pruning, post-training INT8 quantization, and hardware-aware operator mapping to compress models and align them with the heterogeneous compute architecture of the STM32N6 microcontroller from STMicroelectronics. This Microcontroller Unit (MCU) integrates a novel Arm Cortex-M55 core and a Neural-ART Neural Processing Unit (NPU), providing a realistic proxy for CubeSat onboard computers. The paper evaluates the proposed approach on three EO benchmark datasets (i.e., EuroSAT, RS_C11, MEDIC) and four models (i.e., SqueezeNet, MobileNetV3, EfficientNet, MCUNetV1). We demonstrate an average reduction in RAM usage of 89.55% and Flash memory of 70.09% for the optimized models, significantly decreasing downlink bandwidth requirements while maintaining task-acceptable accuracy (with a drop ranging from 0.4 to 8.6 percentage points compared to the Float32 baseline). The energy consumption per inference ranges from 0.68 mJ to 6.45 mJ, with latency spanning from 3.22 ms to 30.38 ms. These results fully satisfy the stringent energy budgets and real-time constraints required for efficient onboard EO processing.

We propose EdgeSpike, a co-designed spiking neural network (SNN) framework for autonomous low-power sensing in edge Internet of Things (IoT) architectures. EdgeSpike unifies (i) a hybrid surrogate-gradient and direct-encoding training pipeline, (ii) a hardware-aware neural architecture search (NAS) bounded by per-inference energy and memory budgets, (iii) an event-driven runtime targeting Intel Loihi 2, SpiNNaker 2, and commodity ARM Cortex-M microcontrollers with custom spike-sparse SIMD kernels, and (iv) a lightweight local plasticity rule enabling continual on-device adaptation without backpropagation. The framework is evaluated across five sensing tasks (keyword spotting, vibration-based machine fault detection, surface electromyography gesture recognition, 77 GHz radar human-activity classification, and structural-health acoustic-emission monitoring) on three hardware targets. EdgeSpike achieves a mean classification accuracy of 91.4%, within 1.2 percentage points (pp) of strong INT8 convolutional neural network (CNN) baselines (mean 92.6%), while reducing energy per inference by 18x to 47x on neuromorphic hardware (mean 31x) and by 4.6x to 7.9x on Cortex-M (mean 6.1x). End-to-end latency remains at or below 9.4 ms across all 15 task-hardware configurations. A seven-month, 64-node wireless field deployment confirms a 6.3x extension in projected battery lifetime (from 312 to 1978 days at 2 Wh per node) and bounded accuracy degradation under seasonal drift (0.7 pp with on-device adaptation versus 2.1 pp without). Hardware-aware NAS evaluates 8400 candidates and yields a 12-point Pareto front. EdgeSpike will be released as open source with reproducible training pipelines, hardware-portable runtimes, and benchmark suites.