Self-Localizing MIMO Beam Mapping with Continuously Evolving Channel Memory

Accurate user equipment (UE) localization is critical for beam management in reconfigurable intelligent surface (RIS)-assisted millimeter-wave (mmWave) based sixth-generation (6G) networks, especially if the direct base-station-UE links are unavailable. This paper proposes a beam-domain fingerprint framework that maps the received signal-to-noise ratio (SNR) across a small set of predefined RIS reflection states to the UE azimuth angle and range, without requiring channel state information (CSI). Crucially, we extend the framework to a realistic interference-impaired scenario in which a nearby cross-link interferer (CLI) corrupts the clean SNR fingerprint, yielding a signal-to-interference-plus-noise ratio (SINR) fingerprint; an interference-to-noise ratio (INR)-constrained calibration strategy keeps the interference level physically interpretable. Four machine-learning (ML) regressors are evaluated under both conditions. Simulation results at 28 GHz with a 20x20 RIS show that k-nearest neighbors (KNN) achieves the lowest angle MAE of 0.37 degrees and range MAE of 4 cm under clean conditions, rising to 1.4 degrees and 7.6 cm under interference. A key finding is that interference degrades angle estimation substantially more than range estimation across all models, a consequence of the asymmetric encoding of location information in the beam-domain fingerprint.

The evolution toward sixth-generation (6G) wireless networks is driving larger antenna arrays and highly directional multi-beam transmission, making accurate knowledge of beam-dependent spatial coverage important for beam management and environment-aware network operation. Radio maps (RMs) provide such a representation, yet conventional RM prediction assumes omnidirectional or transmitter-level radiation. In beamformed multiple-input multiple-output (MIMO) systems, one propagation scene instead gives rise to many configuration-dependent beam radio maps (BeamRMs), creating challenges in beam representation and generalization. Existing methods either condition prediction on beam descriptors or use beam maps as auxiliary inputs to generic architectures. We propose BeamRMX, which, to the best of our knowledge, is the first dedicated framework to treat the spatial radiation pattern as the primary BeamRM query and learn how scene geometry transforms it into the received power field. XBase learns multiscale interactions between the radiation query and scene geometry, while an optional Evidence Adapter uses a few cross-configuration BeamRMs from the same scene. Matched-domain and zero-shot experiments show consistent gains over deterministic and diffusion baselines, including mean absolute error reductions of 26.1% on unseen scenes and 47.8% on an unseen configuration. Cross-configuration evidence further improves reconstruction and intra-sector beam refinement.

Radio map (RM) estimation aims to reconstruct the spatial distribution of wireless signal characteristics, such as received signal strength (RSS), from sparse measurements, a task that is critical for spectrum management, interference mitigation, and localization in modern wireless networks. Traditional approaches, including interpolation and deep learning, either struggle to capture complex propagation effects or require large-scale retraining for each new sampling pattern, which limits their generalization. More recently, prior-based methods have combined pre-trained generative models with measurements to reduce the need for deployment-time model fine-tuning, but they typically treat the prior as a simple regularizer and lack explicit transmitter-aware integration. In this paper, we propose RadioTrace, a novel RM estimation framework without deployment-time fine-tuning that tightly integrates sparse RSS measurements with a frozen pre-trained diffusion prior. RadioTrace incorporates transmitter (Tx) location estimation directly into the denoising loop, iteratively refining Tx coordinates based on reconstruction quality to guide the generative process. To further enhance robustness, we introduce a propagation-guided K-means initialization that mitigates poor local minima in the Tx update and provides a geometry-consistent starting point. Moreover, we provide a stochastic stability analysis for the Tx-coordinate refinement component, showing that the Tx update remains stable under perturbations induced by diffusion sampling and Tx-map relaxation. Extensive experiments demonstrate that RadioTrace achieves competitive performance with state-of-the-art learning-based methods under random sampling, and maintains strong reconstruction quality under restricted-area sampling, highlighting its adaptability, robustness, and practical relevance.