Parameter-Efficient Transfer Learning for Microseismic Phase Picking Using a Neural Operator
Organizations: Department of Geosciences, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia · Seismik s.r.o., Prague, 18200, Czech Republic · Department of Electrical Engineering, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia
Abstract
Seismic phase picking is fundamental for microseismic monitoring and subsurface imaging. Manual processing is impractical for real-time applications and large sensor arrays, motivating the use of deep learning-based pickers trained on extensive earthquake catalogs. On a broader scale, these models are generally tuned to perform optimally in high signal-to-noise and long-duration networks and often fail to perform satisfactorily when applied to campaign-based microseismic datasets, which are characterized by low signal-to-noise ratios, sparse geometries, and limited labeled data. In this study, we present a microseismic adaptation of a network-wide earthquake phase picker, Phase Neural Operator (PhaseNO), using transfer learning and parameter-efficient fine-tuning. Starting from a model pre-trained on more than 57,000 three-component earthquake and noise records, we fine-tune it using only 200 labeled and noisy microseismic recordings from hydraulic fracturing settings. We present a parameter-efficient adaptation of PhaseNO that fine-tunes a small fraction of its parameters (only 3.6%) while retaining its global spatiotemporal representations learned from a large dataset of earthquake recordings. We then evaluate our adapted model on three independent microseismic datasets and compare its performance against the original pre-trained PhaseNO, a STA/LTA-based workflow, and two state-of-the-art deep learning models, PhaseNet and EQTransformer. We demonstrate that our adapted model significantly outperforms the original PhaseNO in F1 and accuracy metrics, achieving up to 30% absolute improvements in all test sets and consistently performing better than STA/LTA and state-of-the-art models. With our adaptation being based on a small calibration set, our proposed workflow is a practical and efficient tool to deploy network-wide models in data-limited microseismic applications.
Figures & tables
| Parameter | Value |
|---|---|
| Number of FNO layers | 8 |
| Number of GNO layers | 6 |
| Base hidden dimension ( ) | 48 |
| Base Fourier modes ( ) | 24 |
| Hidden dimension multipliers | (U-shaped) |
| Fourier modes multipliers |
| Processing Stage | Parameter Settings |
|---|---|
| 1. Pre-Processing | Filter Type: 4th-order Butterworth bandpass |
| (All components) | Frequency Band: 2.0 – 38.0 Hz |
| 2. P-Wave Picking | Component: Vertical (Z) |
| (STA/LTA + AIC) | STA Window: 0.5 s |
| LTA Window: 5.0 s | |
| Trigger Threshold (ON): 3.0 |
| P-Arrival | S-Arrival | |||||||
| Model | Pr | Re | F1 | Acc | Pr | Re | F1 | Acc |
| Test Set 1 | ||||||||
| Original | 0.68 | 0.88 | 0.77 | 0.77 | 0.76 | 0.92 | 0.83 | 0.84 |
| Fine-tuned | 0.89 | 0.97 | 0.93 | 0.93 | 0.88 | 0.97 | 0.92 | 0.93 |
| Conventional | 0.63 | 0.78 | 0.69 | 0.72 | 0.34 | 0.43 | 0.38 | 0.49 |
| PhaseNet | 0.89 | 0.28 | 0.43 | 0.66 | 0.88 | 0.30 | 0.45 | 0.67 |
| Model Variant | F0 | F1 | F2 | F3 | F4 | Mean | SD |
|---|---|---|---|---|---|---|---|
| CR-LoRA | 0.884 | 0.891 | 0.884 | 0.896 | 0.884 | 0.888 | 0.005 |
| LoRA-only | 0.890 | 0.881 | 0.897 | 0.869 | 0.883 | 0.884 | 0.009 |
| SE-only | 0.845 | 0.849 | 0.842 | 0.812 | 0.831 | 0.836 | 0.013 |
| Model Variant | D1 | D2 | D3 |
|---|---|---|---|
| CR-LoRA | 0.929 | 0.930 | 0.594 |
| LoRA-only | 0.929 | 0.928 | 0.589 |
| SE-only | 0.910 | 0.870 | 0.537 |
Seismology
Seismology studies earthquakes and seismic waves to understand Earth’s structure, monitor faults, and assess geological and infrastructure hazards.
See all 48 papers