Understanding Fire Through Thermal Radiation Fields for Mobile Robots

Most existing robot simulators prioritize rigid-body dynamics and photorealistic rendering, but largely neglect the thermally and optically complex phenomena that characterize real-world fire environments. For robots envisioned as future firefighters, this limitation hinders both reliable capability evaluation and the generation of representative training data prior to deployment in hazardous scenarios. To address these challenges, we introduce Fire as a Service (FaaS), a novel, asynchronous co-simulation framework that augments existing robot simulators with high-fidelity and computationally efficient fire simulations. Our pipeline enables robots to experience accurate, multi-species thermodynamic heat transfer and visually consistent volumetric smoke without disrupting high-frequency rigid-body control loops. We demonstrate that our framework can be integrated with diverse robot simulators to generate physically accurate fire behavior, benchmark thermal hazards encountered by robotic platforms, and collect realistic multimodal perceptual data. Crucially, its real-time performance supports human-in-the-loop teleoperation, enabling the successful training of reactive, multimodal policies via Behavioral Cloning. By adding fire dynamics to robot simulations, FaaS provides a scalable pathway toward safer, more reliable deployment of robots in fire scenarios.

Robotics are expected to support environmental monitoring and natural disaster management, where decisions must be made under uncertainty, resource limitations, and strict operational constraints. In critical missions, such as wildfires, robotic agents must not only identify hazardous events with sufficient confidence, but also manage the energy cost and time until detection. This paper introduces ED3R, an energy-aware distributed framework for wildfire detection under uncertainty. ED3R enables hierarchical cooperative decision-making between a robot and a remote controller. The remote controller decides upon the robot's motion, while the robot senses the environment and decides where to execute the wildfire detection (onboard or remotely) and how. The common goal is to detect wildfires with a required confidence while minimizing the energy consumed by any robot operation. ED3R further integrates mechanisms to avoid nearby obstacles, prevent redundant exploration, enable adaptive early mission completion, and ensure feasibility through a custom penalty function. ED3R also introduces a forward-looking capability, enabled through distributed neural regression models that allow the agents to anticipate the future by evaluating candidate strategies before execution. The framework is evaluated through realistic robotics simulations, ablation studies, and baseline comparisons. Overall, ED3R achieves a mission success rate of up to 97.18%. Especially in the most demanding missions, it reduces energy consumption by up to 36.4% and detects wildfires up to 41% faster than baselines.

Wildfire monitoring from UAVs requires reliable reasoning over complex aerial scenes, where smoke, scale variation, and occlusions often limit RGB-only interpretation. We introduce FlameVQA, a multiple-choice visual question answering benchmark for UAV-based wildfire intelligence built on FLAME 3, leveraging paired RGB imagery and radiometric thermal TIFFs for temperature-grounded, safety-critical reasoning. FlameVQA includes 34 multiple-choice questions per image spanning six operational capability groups, covering tasks such as detection, localization, distribution/coverage estimation, cross-modal reasoning, and flight planning. To ensure label reliability, we combine MLLM-assisted annotation with deterministic thermal rules and cross-question consistency checks, followed by human auditing. We also evaluate representative MLLMs on FlameVQA to provide baselines for future work. Results show strong performance when explicit cross-modal cues are available, but notable failures on presence detection under heavy smoke and on coverage estimation. These findings suggest that current MLLMs require domain-specific adaptation to better support disaster and wildfire monitoring. The dataset and benchmark code are open-source at github.com/mobiiin/WildFire_VQA