Scalar-Measurement Attitude Estimation on $\mathbf{SO}(3)$ with Bias Compensation

This paper proposes a complementary filter on SO(3) for attitude estimation from scalar measurements corresponding to projections of known inertial vectors onto body-frame sensing directions. The observer evolves directly on SO(3) and employs a constant-gain innovation tailored to the scalar-output structure. Under suitable persistence-of-excitation conditions, almost-global asymptotic stability is established when at least three inertial vectors are measured along a common body-frame direction. For configurations involving only two scalar measurements, sufficient conditions for asymptotic convergence are derived together with an explicit characterization of the region of attraction. Numerical simulations illustrate the proposed results.

Accurate and robust attitude estimation is a key challenge for autonomous vehicles, particularly in GNSS-denied conditions and during highly accelerated flight. In such conditions, Inertial Measurement Units (IMUs) alone are insufficient for reliable tilt estimation due to the ambiguity between gravitational and inertial accelerations. Although auxiliary velocity sensors such as GNSS, Pitot tubes, Doppler radar, or Visual Inertial Odometry are commonly used, they may be unavailable, intermittent, or costly. This paper introduces a barometer-aided attitude estimation architecture that exploits barometric altitude measurements to provide complementary information on the vehicle's vertical motion, thereby enhancing attitude estimation within nonlinear observers on SO(3). The contributions are twofold. First, we design a deterministic Riccati observer cascaded with a complementary filter, ensuring almost-global asymptotic stability (AGAS) under a uniform observability (UO) condition while preserving the geometric structure of the attitude dynamics. Second, we propose a nonlinear observer evolving on SO(3)xR2, which integrates IMU measurements as inputs and barometer and magnetometer measurements as outputs within a unified framework, guaranteeing local exponential stability (LES) under relaxed uniform observability conditions. The proposed approaches are validated using both simulated and real flight data. The results demonstrate that barometer-aided estimation provides a lightweight, reliable, and effective complementary sensing modality for attitude estimation in minimal-sensing configurations, offering a practical alternative when conventional velocity measurements are unavailable or degraded.

We present an attitude-only framework for estimating a spacecraft's normalized inertia tensor from torque-free rotational motion. Our method supports both continuous single-arc observations and the joint use of multiple short torque-free arcs, while requiring neither gyroscope measurements nor known control torques. A Karush-Kuhn-Tucker formulation provides a fast linear initialization, which is refined by nonlinear shooting using the exact Jacobi-elliptic solution of Euler's equations and a Magnus-expansion quaternion map. Under controlled attitude noise, tests using a single 500-second arc reduced inertia-tensor error by approximately one order of magnitude relative to an Extended Kalman Filter initialized from the same estimate, while requiring nearly two orders of magnitude less computation. Joint estimation from three 100-second arcs provided a similar improvement in accuracy and remained more than one order of magnitude faster. Photorealistic proximity-operations simulations further evaluated both strategies using monocular image-derived attitudes. The 2000-second single-arc cases achieved sub-thousandth median inertia-tensor error and supported 10-hour attitude predictions with single-digit-degree median error. In three-arc cases using 30-300 seconds per arc, our method consistently outperformed the EKF refinement, with performance governed by rotational excitation and temporal sampling.