Typography-Based Monocular Distance Estimation Framework for Vehicle Safety Systems

Accurate inter-vehicle distance estimation is a cornerstone of Advanced Driver Assistance Systems (ADAS) and autonomous driving. While LiDAR and radar provide high precision, their high cost prohibits widespread adoption in mass-market vehicles. Monocular camera-based estimation offers a low-cost alternative but suffers from fundamental scale ambiguity. Recent deep learning methods for monocular depth achieve impressive results yet require expensive supervised training, suffer from domain shift, and produce predictions that are difficult to certify for safety-critical deployment. This paper presents a framework that exploits the standardized typography of United States license plates as passive fiducial markers for metric ranging, resolving scale ambiguity through explicit geometric priors without any training data or active illumination. First, a four-method parallel plate detector achieves robust plate reading across the full automotive lighting range. Second, a three-stage state identification engine fusing optical character recognition text matching, multi-design color scoring, and a lightweight neural network classifier provides robust identification across all ambient conditions. Third, hybrid depth fusion with inverse-variance weighting and online scale alignment, combined with a one-dimensional constant-velocity Kalman filter, delivers smoothed distance, relative velocity, and time-to-collision for collision warning. Baseline validation on a controlled static dataset reproduces a 2.3% coefficient of variation in character height measurements and a 36% reduction in distance-estimate variance compared with plate-width methods from prior work.

Estimating the distance to a leading vehicle is a basic input to forward collision warning, adaptive cruise control, and automated emergency braking. Production systems obtain this distance from radar, laser scanners, or stereo camera pairs, which add cost, power draw, and packaging constraints. This paper asks whether a single ordinary camera can recover the same distance by using a target that is standardized in size and present on every road vehicle: the rear license plate. U.S. plates share a fixed outer size and a character height that is set by regulation and varies only narrowly between states, so the height of a plate character in the image is a direct measure of distance once the camera geometry is known. The proposed method (Typography-Based Monocular Distance Estimation) detects the plate, measures the height of its printed characters, identifies the issuing state to select the correct physical character height, and recovers distance from the camera projection. Three measurements taken from the same plate: the character height, the stroke width, and the character spacing. Together with the spacing of the two mounting holes and a single-image depth network, are combined so that a weak or corrupted measurement is given less weight automatically. The distance, its rate of change, and a time-to-collision estimate are smoothed across frames and used to raise a warning with the timing used by U.S. collision-warning regulations. The same plate that anchors the scale also identifies the vehicle, so the method returns a distance, a bearing, and an identity from one passive sensor. It reads scale from a printed standard instead of from time of flight or parallax, making it a cheap, low-maintenance complement to those sensors in a fault-tolerant perception stack, achieving the cost-effective distance estimation with error less than 0.13 m.

This paper proposes a calibration-free framework for reliably and effectively estimating vehicle speeds from monocular videos, without relying on roadway features, camera calibration, or roadway-feature-based reference objects. The proposed framework estimates vehicle speeds using a 36-keypoint vehicle template and a homography matrix updated at each frame. A YOLO-based keypoint detection module is trained on diverse datasets, and two estimation strategies are compared: keypoint-only tracking and warped optical flow with dense spatial aggregation. Speed is estimated by projecting displacements into metric space using the homography, with validation conducted on over 400 video clips from roadside and overhead datasets, covering speeds from 30 to 100 mph. The method achieves reliable speed estimation on the VS13 and BrnoCompSpeed datasets, with the warped optical flow method delivering MAEs of 15.0% and 9.7%, respectively, and 77.9% and 93.1% of estimates falling within +/-20% error. After applying a 10% trim to remove edge-of-frame outliers, performance improves to MAEs of 11.7% and 7.6%, with within-+/-20% accuracy increasing to 85.3% and 95.4%. This work addresses key limitations of existing vision-based approaches and enables low-cost and efficient speed enforcement using portable devices such as dashcams and smartphones, thereby supporting citizen-based enforcement programs for traffic safety.