cs.ITMar 15, 2026

DeepOFW: Deep Learning-Driven OFDM-Flexible Waveform Modulation for Peak-to-Average Power Ratio Reduction

Authors: Ran Greidi, Kobi Cohen

Organizations: School of Electrical and Computer Engineering, Ben-Gurion University of the Negev, Beer Sheva 8410501 Israel.

Abstract

Peak-to-average power ratio (PAPR) remains a major limitation of multicarrier modulation schemes such as orthogonal frequency-division multiplexing (OFDM), reducing power amplifier efficiency and limiting practical transmit power. In this work, we propose DeepOFW, a deep learning-driven OFDM-flexible waveform modulation framework that enables data-driven waveform design while preserving the low-complexity hardware structure of conventional transceivers. The proposed architecture is fully differentiable, allowing end-to-end optimization of waveform generation and receiver processing under practical physical constraints. Unlike neural transceiver approaches that require deep learning inference at both ends of the link, DeepOFW confines the learning stage to an offline or centralized unit, enabling deployment on standard transmitter and receiver hardware without additional computational overhead. The framework jointly optimizes waveform representations and detection parameters while explicitly incorporating PAPR constraints during training. Extensive simulations over 3GPP multipath channels demonstrate that the learned waveforms significantly reduce PAPR compared with classical OFDM while simultaneously improving bit error rate (BER) performance relative to state-of-the-art transmission schemes. These results highlight the potential of data-driven waveform design to enhance multicarrier communication systems while maintaining hardware-efficient implementations. An open-source implementation of the proposed framework is released to facilitate reproducible research and practical adoption.

Figures & tables

Explore similar work

Mar 17, 2026

Deep Learning-Driven Black-Box Doherty Power Amplifier with Pixelated Output Combiner and Extended Efficiency Range

This article presents a deep learning-driven inverse design methodology for Doherty power amplifiers (PA) with multi-port pixelated output combiner networks. A deep convolutional neural network (CNN) is developed and trained as an electromagnetic (EM) surrogate model to accurately and rapidly predict the S-parameters of pixelated passive networks. By leveraging the CNN-based surrogate model within a blackbox Doherty framework and a genetic algorithm (GA)-based optimizer, we effectively synthesize complex Doherty combiners that enable an extended back-off efficiency range using fully symmetrical devices. As a proof of concept, we designed and fabricated two Doherty PA prototypes incorporating three-port pixelated combiners, implemented with GaN HEMT transistors. In measurements, both prototypes demonstrate a maximum drain efficiency exceeding 74% and deliver an output power surpassing 44.1 dBm at 2.75 GHz. Furthermore, a measured drain efficiency above 52% is maintained at the 9-dB back-off power level for both prototypes at the same frequency. To evaluate linearity and efficiency under realistic signal conditions, both prototypes are tested using a 20-MHz 5G new radio (NR)-like waveform exhibiting a peak-to-average power ratio (PAPR) of 9.0 dB. After applying digital predistortion (DPD), each design achieves an average power added efficiency (PAE) above 51%, while maintaining an adjacent channel leakage ratio (ACLR) better than -60.8 dBc.
Feb 23, 2026

Learning During Detection: Continual Learning for Neural OFDM Receivers via DMRS

Deep neural networks (DNNs) have been increasingly explored for receiver design because they can handle complex environments without relying on explicit channel models. Nevertheless, because communication channels change rapidly, their distributions can shift over time, often making periodic retraining necessary. This paper proposes a zero-overhead online and continual learning framework for orthogonal frequency-division multiplexing (OFDM) neural receivers that directly detect the soft bits of received signals. Unlike conventional fine-tuning methods that rely on dedicated training intervals or full resource grids, our approach leverages existing demodulation reference signals (DMRS) to simultaneously enable signal demodulation and model adaptation. We introduce three pilot designs: fully randomized, hybrid, and additional pilots that flexibly support joint demodulation and learning. To accommodate these pilot designs, we develop two receiver architectures: (i) a parallel design that separates inference and fine-tuning for uninterrupted operation, and (ii) a forward-pass reusing design that reduces computational complexity. Simulation results show that the proposed method effectively tracks both slow and fast channel distribution variations without additional overhead, service interruption, or catastrophic performance degradation under distribution shift.
Jul 9, 2026

Deep Learning for Joint Narrowband Interference Cancellation and Soft Demodulation in OFDM Systems

Narrowband interference (NBI) severely degrades orthogonal frequency-division multiplexing (OFDM) systems by corrupting subcarriers and rendering classical soft demodulation ineffective. Conventional compressed-sensing (CS) mitigation exhibits high sequential latency and leaves structured, non-Gaussian residuals that cause log-likelihood ratio (LLR) unreliability, decoder saturation, and severe error floors when employing classical Gaussian demappers. We resolve this pipeline mismatch using a unified deep learning framework for joint NBI cancellation and robust soft demodulation. First, NBI-CNet employs a physics-informed convolutional architecture to estimate NBI parameters and remove multi-tone interference in a single forward pass. Without requiring prior knowledge of the active interferer count, NBI-CNet reduces computational complexity by up to 60% (N=2048,Q=64N{=}2048, Q{=}64) compared to the state-of-the-art EOMP-IDS algorithm. Second, LLR-CNet acts as a structural whitener by mapping non-Gaussian post-mitigation residuals onto well-calibrated soft metrics. Simulations demonstrate that this joint framework eliminates the error floors inherent to traditional baselines across dense grids. Under severe interference (SIR=−10\text{SIR}{=}{-}10 dB), the pipeline operates within a 0.20.2 to 0.50.5 dB SNR margin of the optimal iterative baseline at a target block error rate (BLER) of 10−410^{-4}. Under mild interference (SIR=10\text{SIR}{=}10 dB) with heavy spectral overlap (Q=12Q{=}12), where classical greedy algorithms erroneously subtract valid data components and corrupt the payload, NBI-CNet avoids signal-peak confusion to deliver a coding gain exceeding 33 dB. Finally, the architecture circumvents the 2×10−42{\times}10^{-4} error floor triggered by interferer-estimation errors, while its scale-invariant design enables robust generalization across arbitrary FFT sizes without retraining.