Robust Quadruped Locomotion via Evolutionary Reinforcement Learning

While energy efficiency is a critical objective for legged-robot locomotion control, achieving low energy consumption while maintaining robust performance across different velocity ranges and terrain conditions remains a key challenge. This is particularly true for end-to-end RL policies, where gait generation, motion execution, and energy optimization are tightly coupled, leading to high sensitivity to reward design. In this work, we propose a hierarchical reinforcement learning (HRL) framework that separates a high-frequency policy for stable and robust joint-level motion execution from low-frequency gait adaptation that explicitly minimizes the cost of transport (CoT). The three-stage Isaac-based training procedure enables zero-shot sim-to-real transfer with improved tracking accuracy, robustness, and energy efficiency. The learned hierarchy exhibits automatic speed-dependent gait adaptation, transitioning from pacing at low speeds to trotting at higher speeds. We validate the proposed approach in simulation against representative single-policy and hierarchical locomotion baselines, demonstrating reduced CoT over a broad range of commanded velocities, while maintaining robust locomotion across flat, uneven rough, and inclined terrains. We further demonstrate its practical feasibility through zero-shot deployment on a physical Unitree AlienGo quadruped.

Achieving quadruped robot locomotion across diverse and dynamic terrains presents significant challenges, primarily due to the discrepancies between simulation environments and real-world conditions. Traditional sim-to-real transfer methods often rely on manual feature design or costly real-world fine-tuning. To address these limitations, this paper proposes the DreamTIP framework, which incorporates Task-Invariant Properties learning within the Dreamer world model architecture to enhance sim-to-real transfer capabilities. Guided by large language models, DreamTIP identifies and leverages Task-Invariant Properties, such as contact stability and terrain clearance, which exhibit robustness to dynamic variations and strong transferability across tasks. These properties are integrated into the world model as auxiliary prediction targets, enabling the policy to learn representations that are insensitive to underlying dynamic changes. Furthermore, an efficient adaptation strategy is designed, employing a mixed replay buffer and regularization constraints to rapidly calibrate to real-world dynamics while effectively mitigating representation collapse and catastrophic forgetting. Extensive experiments on complex terrains, including Stair, Climb, Tilt, and Crawl, demonstrate that DreamTIP significantly outperforms state-of-the-art baselines in both simulated and real-world environments. Our method achieves an average performance improvement of 28.1% across eight distinct simulated transfer tasks. In the real-world Climb task, the baseline method achieved only a 10\ success rate, whereas our method attained a 100% success rate. These results indicate that incorporating Task-Invariant Properties into Dreamer learning offers a novel solution for achieving robust and transferable robot locomotion.

Reinforcement learning (RL) for legged robots is advancing locomotion, demonstrating its ability to adapt to new and challenging terrain. Traditionally, these RL locomotion frameworks are position-based, making the policy less adaptable to terrain types and requiring state estimation techniques in the observation space, i.e., linear velocity. Moreover, these RL frameworks often use small, lightweight quadrupeds that are limited in their viability for high-complexity tasks due to hardware constraints. This work explores an RL torque control framework for heavyweight high-torque quadrupeds. The RL framework in this paper can traverse rough terrain and effectively track a desired linear velocity without requiring knowledge of the agent's current velocity. Using Nvidia's Isaac Sim and Isaac Lab, simulation results of the RL torque control policy are shown on the Unitree B1 quadruped, achieving speeds of 3.5 m/s and 1.5 rad/s. In addition, the quadruped can walk up and down stairs without the aid of an exteroceptive sensor.