Sustainable Transformer Neural Network Acceleration with Stochastic Photonic Computing

Recently, photonic transformer accelerators (PTAs) have successfully achieved significant speedup and energy efficiency improvements over electronic accelerators for expediting Transformer inference. However, state-of-the-art rely on expensive multi-wavelength light generation and large dot-product units due to active phase-shifter components, thus making their approach inefficient and impractical. To address this, we propose MDTransformer, a novel hardware-software co-design of PTA based on mode-division optical dataflow and operations. Specifically, MDTransformer performs complex matrix operations using spatial-mode interference, that leverages the inverse-designed multi-mode couplers, crossings, and Mach-Zehnder IQ modulators into a compact mode-division photonic tensor core (MPTC), capable of executing matrix multiplications in the optical domain. Its each guided mode (i.e., TE0-TE3) acts as an independent computational lane, enabling four-fold parallelism-per-waveguide without spectral filtering or free-spectral-range limitations. Moreover, its coherent detection and IQ modulation jointly encode amplitude and phase, realizing complex-valued arithmetic for full-range operations in transformers. MDTransformer offers analog multiplication with sub-4-bit effective precision and inter-modal crosstalk below -30 dB. Its inverse-designed approach also offers scalable and full compatibility with single-laser continuous-wave operation at 1550 nm. Experimental results show that MDTransformer achieves 40.4% area reduction, 63.6% power saving, 40.6% energy saving, and comparable latency over the state-of-the-art PTA across different workloads (i.e., DeiT-Tiny/Small/Base and BERT-Base/Large). These results show that MDTransformer offers a practical solution for high-performance and energy-efficient transformer-based systems.

Transformer-based networks have emerged as prominent AI models with state-of-the-art performance, which potentially pave the way toward artificial general intelligence (AGI). However, their large sizes still hinder their efficient implementation, thus highlighting the need for alternate solutions to enable their energy-efficient acceleration. Recently, state-of-the-art works propose photonic transformer accelerators (PTAs) with significant speedup and energy efficiency improvements over the conventional electronic accelerators. However, their PTA architectures are developed without considering the application constraints (e.g., area, power, energy, and latency). Moreover, their manual design approach also requires huge design time to determine a suitable architecture for the targeted application, hence making this approach not scalable. To address these limitations, we propose DxPTA, a novel design space exploration methodology for enabling efficient hardware/software co-design of the appropriate PTA architecture that meets all constraints. It is achieved by (1) identifying the PTA architecture parameters based on the coherent optical dataflow; (2) analyzing the impact/significance of the parameters; and (3) leveraging this analysis for devising a constraint-aware architecture search algorithm. Experimental results show that, our DxPTA can find the appropriate PTA architectures for different transformer-based models (i.e., DeiT-T/S/B and BERT-B/L). It achieves up to 26mm^2 area, 4.8W power, 39mJ energy, and 6ms latency, for constraints of 50mm^2 area, 5W power, 50mJ energy, and 10ms latency; with 15.2x faster searching time than the exhaustive approach. These results demonstrate the potential of DxPTA methodology for enabling efficient PTA designs for diverse AGI-based applications.

Matrix multiplications dominate the inference cost of modern transformer-based vision models, yet existing efficiency techniques such as post-training quantization and mixed-precision inference are largely limited to the small set of fixed-width formats (INT4, INT8, BF16, and FP16) supported by conventional accelerators. We revisit stochastic computing (SC) as a way to lift this constraint: viewed as a dense adaptive quantizer, SC controls precision by bit-stream length L rather than a fixed datapath, while each multiplication reduces to a single AND/XNOR gate. We build a GPU library that emulates SC matrix multiplication at scale, exposes stream lengths as first-class kernel arguments, and evaluates SC end-to-end on image classification, object detection and instance segmentation, class-conditional image generation, and visual world-model planning. On top of this substrate, we develop a dynamic per-row mixed-precision policy that assigns stream length per token or group at matched average budget, requires no retraining, and uses the same SC hardware across schedules. Across tasks, SC remains competitive with fixed-format INT quantization at matched bit budgets, while per-row mixed precision helps maintain accuracy at lower average stream lengths. These results provide software-level feasibility evidence that SC can serve as a dense-precision substrate for fine-grained mixed-precision inference on modern vision transformers.