X2-N: A Transformable Wheel-legged Humanoid Robot with Dual-mode Locomotion and Manipulation
Authors: Yan Ning, Xingzhou Chen, Delong Li, Hao Zhang, Hanfu Gai, Tongyuan Li, Cheng Zhang, Zhihui Peng, +1 more
Abstract
Wheel-legged robots combine the efficiency of wheeled locomotion with the versatility of legged systems, enabling rapid traversal over both continuous and discrete terrains. However, conventional designs typically employ fixed wheels as feet and limited degrees of freedom (DoFs) at the hips, resulting in reduced stability and mobility during legged locomotion compared to humanoids with flat feet. In addition, most existing platforms lack a full upper body with arms, which limits their ability to perform dexterous manipulation tasks. In this letter, we present X2-N, a high-DoF transformable robot with dual-mode locomotion and manipulation. X2-N can operate in both humanoid and wheel-legged forms and transform seamlessly between them through joint reconfiguration. We further propose a reinforcement learning (RL)-based whole-body control framework tailored to this morphology, enabling unified control across hybrid locomotion, transformation, and manipulation. We validate X2-N in a range of challenging locomotion and manipulation tasks, including dynamic skating-like motion, stair climbing and package delivery. Results demonstrate high locomotion efficiency, strong terrain adaptability, and stable loco-manipulation performance of X2-N, highlighting its potential for real-world deployment.
This paper presents KYON, a hybrid wheel-legged quadruped robot equipped with a bimanual upper body for loco-manipulation tasks. The platform features a semi-modular design with a reconfigurable lower legs, enabling both wheeled and legged locomotion depending on the environment. A design approach that places actuators in the base and uses transmission mechanisms reduces distal inertia, improving agility and dynamic performance. The robot integrates a whole-body control framework together with a reinforcement learning based policy to handle nonlinear dynamics and enhance robustness to disturbances for the execution of locomotion and manipulation tasks, independently. Experimental results demonstrate effective dynamic locomotion and bimanual manipulation, validating the platform's capability to operate in complex and unstructured scenarios.
Luca Rossini, Arturo Laurenzi, Francesco Ruscelli +8
Loco-manipulation has recently shown promising capabilities; however, achieving high-precision control, managing the high-dimensional action space induced by many degrees of freedom (DoFs), and fully exploiting the inherent redundancy of whole-body systems remain challenging. In this paper, we propose a novel whole-body control framework that effectively addresses these challenges by decomposing the complex loco-manipulation problem into partial reference motion generation and low-level imitation control. We introduce a new Kinematic Normalizing Flow (KNF) model, trained on a large-scale kinematic dataset, that generates diverse yet feasible partial reference motions. A high-level controller is then trained to navigate the KNF's latent space to exploit redundant solutions, while a low-level controller ensures physically feasible and accurate motion execution. We validate our approach on the quadrupedal robot equipped with a six-DoF robotic arm. In simulation, experimental results show that our approach significantly outperforms state-of-the-art methods in terms of tracking accuracy and feasible workspace coverage. For hardware deployment, we evaluate the system over 24 episodes across 8 different mobile loco-manipulation tasks. The system achieves end-effector pose-tracking errors of 4.5 cm and 0.14 rad, while maintaining accurate locomotion tracking with linear and angular velocity errors of 0.1 m/s and 0.01 rad/s, respectively, outperforming competitive baselines. Our method represents a practical and powerful solution for accurate and generalized whole-body loco-manipulation in high-DoF robotic systems, with promising potential for diverse downstream robotic tasks.
Human-to-humanoid retargeting has largely been studied on legged platforms, while comparatively few wheeled-humanoid systems support coupled locomotion and manipulation from general human motion. Building on GMR's configurable general-motion retargeting and BeyondMimic's physically simulated R1 Pro learning framework, we present a reproducible pipeline that converts multi-dataset SMPLX motion into executable loco-manipulation behavior for the Galaxea R1 Pro wheeled humanoid. The robot has a planar three-wheel base, a serial torso, and two arms but no leg joints, so human lower-body motion must be redistributed across base motion and torso posture without sacrificing manipulation-relevant arm geometry. Our pipeline combines canonical body-shape preprocessing, planar-base normalization, morphology-aware differential inverse kinematics, shoulder-rooted hierarchical arm retargeting, and continuous torso substitution for bending and squatting. A reference-twist-driven planning layer then decodes planar base motion into continuous three-wheel steering and rolling commands subject to hysteresis, kinematic continuity, acceleration, and actuator-rate limits. Finally, a 21-dimensional BaseDecode policy is trained in Isaac Lab with directional joint-limit scaling, focused upper-body tracking, and a staged wheel-contact reward. The resulting system provides a complete bridge from human motion data to physically trackable wheeled-humanoid loco-manipulation rather than a visualization-only retargeter; quantitative policy comparisons remain scheduled for a later revision.