Training machine learning models for robotic tactile sensing requires vast amounts of data, yet obtaining realistic interaction data remains a challenge due to physical complexity and variability. Simulating tactile sensors is thus a crucial step in accelerating progress. This paper presents SPLIT, a novel method for simulating image-based tactile sensors, with a primary focus on the DIGIT sensor. Central to our approach is a latent space arithmetic strategy that explicitly disentangles contact geometry from sensor-specific optical properties. Unlike methods that require recalibration for every new unit, this disentanglement allows SPLIT to adapt to diverse DIGIT backgrounds and even transfer data to distinct sensors like the GelSight R1.5 without full model retraining. Beyond this adaptability, our approach achieves faster inference speeds than existing alternatives. Furthermore, we provide a calibrated finite element method (FEM) soft-body mesh simulation with variable resolution, offering a tunable trade-off between speed and fidelity. Additionally, our algorithm supports bidirectional simulation, allowing for both the generation of realistic images from deformation meshes and the reconstruction of meshes from tactile images. This versatility makes SPLIT a valuable tool for accelerating progress in robotic tactile sensing research.
Tactile sensing provides direct measurements of contact interactions that are essential for robotic manipulation. However, current simulators lack the fidelity to faithfully model the complex deformation and transduction mechanics of tactile sensors, severely hindering sim-to-real transfer in robot learning pipelines. To address this challenge, we propose a multi-modal representation learning framework that aligns heterogeneous tactile modalities within a shared latent space, eliminating the need for accurate raw-signal simulation while preserving relevant contact information. Our approach employs modality-specific encoders to project diverse tactile observations, such as simulated penetration depth and real-world capacitance, into a common embedding space. The model is trained using self- and cross-reconstruction objectives alongside contrastive alignment, encouraging modality-invariant yet information-rich representations. We evaluate the learned embeddings on indenter shape identification, force prediction, and geometric reconstruction tasks, training exclusively in simulation and testing directly on real sensor measurements. Our results demonstrate zero-shot sim-to-real transfer across physically dissimilar representations. Furthermore, incorporating multi-physics simulation modalities yields more informative embeddings that transfer across diverse downstream tasks, demonstrating a 16.7% reduction in force prediction error and a 45.8% reduction in shape reconstruction error. Finally, we release an efficient Warp-based implementation of a penalty-based tactile simulation model for Isaac Lab, enabling scalable tactile data generation.
Simulating optical tactile sensors presents significant challenges due to their high deformability and intricate optical properties. To address these issues and enable a physically accurate simulation, we propose DOT-Sim: Differentiable Optical Tactile Simulation. Unlike prior simulators that rely on simplified models of deformable sensors, DOT-Sim accurately captures the physical behavior of soft sensors by modeling them as elastic materials using the Material Point Method (MPM). DOT-Sim enables rapid calibration of optical tactile sensor simulation using a small number of demonstrations within minutes, which is substantially faster than existing methods. Compared to current baselines, our approach supports much larger and non-linear deformations. To handle the optical aspect, we propose a novel approach to simulating optical responses by learning a residual image relative to the real-world idle state. We validate the physical and visual realism of our method through a series of zero-shot sim-to-real tasks. Our experiments show that DOT-Sim (1) accurately replicates the physical dynamics of a DenseTact optical tactile sensor in reality, (2) generates realistic optical outputs in contact-rich scenarios, (3) enables direct deployment of simulation-trained classifiers in the real world, achieving 85% classification accuracy on challenging objects and 90% accuracy in embedded tumor-type detection, and (4) allows precise trajectory following with a policy trained from demonstrations in simulation, with an average error of less than 0.9 mm.
Tactile image generation significantly reduces the dependency on expensive and wear-prone sensors by synthesizing high-fidelity tactile data, offering an efficient solution for tactile information acquisition in robotic perception and human-machine interaction systems. However, existing methods depend on large-scale, diverse datasets from specific sensors and lack efficient data utilization and robust generalization capabilities, struggling in vision-limited environments. To address this, we introduce VQ-Touch, a tactile generation framework that supports both cross-sensor and multi-scenario applications. Specifically, to efficiently extract complex deformation and texture features from the data, we propose DM-VQGAN, an effective tactile representation learner. Furthermore, we introduce a discrete diffusion decoder with a unified conditioning interface, supporting multimodal generation tasks such as images and labels, and enhances the model's generalization capability through few-shot mixed training, thus achieving compatibility with current mainstream sensors and their variants. Experiments show that VQ-Touch surpasses state-of-the-art methods in multiple tasks.