TokaMind for Power Grid: Cross-Domain Transfer from Fusion Plasma
Authors: JC Wu, Norton Lee, Kai Siang Chen
Organizations: TaiScience Research Group, affiliated with Fu Jen Catholic University, Taiwan · Center for Geometry and Physics, Institute for Basic Science (IBS), South Korea · Fu Jen Catholic University, Taiwan
TokaMind is a multi-modal transformer (MMT) foundation model pre-trained on tokamak plasma diagnostics data from MAST, where it was shown to outperform CNN-based approaches on fusion benchmarks. We investigate whether its learned representations generalize to physically distinct but structurally analogous domains. Through systematic experimentation across four domains-industrial bearing degradation, NASA CMAPSS turbofan degradation, and two independent power grid PMU datasets-we identify four transfer-favoring characteristics that help explain where TokaMind's pretrained representations are most effective. Power grid synchrophasor data matches this target-domain profile most directly, while industrial degradation datasets demonstrate that TokaMind can still yield useful performance under partial alignment, especially when task design and feature construction expose physically meaningful degradation structure. On the GESL/PNNL 500-event benchmark with provider-aware evaluation, TokaMind achieves test F1=0.837±0.040 (3seeds) for severe event classification. Our central finding, however, is not the aggregate score: classification difficulty is structurally determined by provider-level grid topology, not model capacity. In the single-window early-warning regime, TokaMind outperforms a CNN baseline (F10.889 vs.~0.878)--a reversal that disappears as more event windows are provided. Furthermore, Critical Slowing Down (CSD) indicators, used as a confidence gate rather than a classification label, improve F1 from 0.696 to 0.750 at 63% coverage-outperforming the CNN baseline (0.636) at any coverage level. These results establish the first cross-domain validation of TokaMind outside nuclear fusion and propose a transferability framework and revised evaluation protocol for multi-source PMU datasets.
Single-task fine-tuning of graph neural networks (GNNs) for power grid problems exhibits a systematic failure mode: models that achieve the lowest in-distribution error degrade the most under topology shift. We term this topology overfitting: the tendency of task-specific gradient signals to encode relational structure particular to the training topologies rather than the underlying physics, causing models to fail on unseen grids despite strong in-distribution performance. To expose and address this failure mode, we introduce MxGPS (Multiplex GPS), a multiplex graph transformer that runs K task-specialised GPS branches over a shared node encoder, jointly trained on Static State Estimation (SSE) and AC Power Flow (PF) via a self-supervised pre-training and multi-task fine-tuning protocol, with a cross-branch attention module evaluated in ablation. The joint SSE+PF objective forces the shared encoder to simultaneously satisfy complementary gradient signals, preventing it from overfitting to topology-specific relational structure. Under a 3-fold sliding-window cross-validation spanning four unseen topologies (14-, 24-, 162-, and 300-bus), MxGPS attains 0% boundary violation rate (BVR) on all four zero-shot Power Flow topologies. Critically, models with substantially lower in-distribution PF error degrade by 190% to 1400% under topology shift, whereas MxGPS degrades by only 39%, an inversion that directly implicates topology overfitting as the failure mechanism rather than insufficient model capacity. With only 1.6M parameters (12x fewer than the GridFM reference baseline), MxGPS demonstrates that multi-task joint training is a principled and parameter-efficient mechanism for topology-agnostic generalisation in power grid foundation models.
Charilaos Papaioannou, Ioannis Tsantilas, Dimitris Giannakakos +9
Plasma diagnostic models for tokamak fusion devices are almost universally evaluated on clean, complete sensor data. In practice, fusion diagnostics fail regularly: acquisition systems start late, individual sensors die, and signal dropouts cluster precisely when a plasma disruption is approaching. We present the first systematic robustness benchmark for plasma diagnostic ML using the TokaMark dataset of 11,573 MAST shots, evaluating XGBoost, LSTM, Transformer, and the TokaMark CNN baseline across six physically-grounded failure scenarios and three imputation strategies. We introduce the Robustness Score (RS) for standardized cross-architecture comparison. Our central finding is that disruption-proximate sensor failure (corruption injected in the final window timesteps) collapses sequence model performance (LSTM +212% NRMSE) while a statistical feature model remains comparatively stable (XGBoost +37%). Forward-fill imputation eliminates nearly all degradation from random dropout for sequence models (LSTM +57% to ~0%), but offers little help when the end of the window is corrupted. Shot-level alarm evaluation using ground-truth disruption timestamps reveals that LSTM alarm detection collapses to TPR=0.00 under proximate sensor failure, while mean-fill imputation recovers it to TPR=1.00, a reversal of the pattern observed in NRMSE. Plasma current emerges as the single most critical diagnostic across all architectures (+73% to +140% upon removal). Code, data, and trained checkpoints are available at https://github.com/Neerav-Gupta/tokamark-robustness.
The wind energy industry relies on accurate power curve models to make power forecast, evaluate turbine performance, quantify upgrade, or support site-planning decisions. In this paper, we focus on site-planning power curves, i.e., we investigate how power curve models trained using turbine data on an operating wind farm can be transferred to a new, undeveloped farm. The traditional wisdom in the wind energy literature relies on distance, layout, or terrain characteristics for making cross-farm power curve transfer. Through the lens of domain adaptation, we propose a more reliable transfer learning approach for cross-farm power curve modeling. In the cross-farm applications, a domain is specified by the temporal environmental variates and spatial terrain variables. Domain adaptation is to find a capable similarity metric to adapt the domain on the new farm to that on the existing farm. Empirical results show that our domain adapted power curve consistently outperforms competing approaches by an appreciable margin for site-planning power predictions.