Under the trend of multi-waveform coexistence in 6G IoT, intelligent receivers must first identify physical-layer waveform types before performing correct demodulation and resource scheduling. However, existing signal identification research largely focuses on symbol-level modulation classification. Research directly targeting physical-layer waveform types (e.g., OFDM, OTFS, LoRa) is not only extremely scarce but also heavily reliant on deep neural networks and complex time-frequency transforms, making deployment on resource-constrained terminals difficult. Symbol modulation classification methods themselves cannot circumvent the prerequisite of ``waveform identification first.'' To address this dual gap, we propose an ultra-lightweight waveform classification framework based on time-frequency multidimensional features with a cooperative Z-test tree (ZTree). The framework employs low-complexity time-domain feature extraction, and the classification backend adopts a ZTree optimized by Z-statistical testing, which uses hypothesis testing confidence to automatically control decision tree splitting and size, ensuring efficient execution on resource-limited processors. Tested on ten 6G candidate waveforms including OFDM, OTFS, DSSS, LoRa, and NB-IoT, the method achieves 99.5% average accuracy under AWGN and 87.4% under TDL-C multipath channels, with main confusion between OTFS and LoRa. Implemented in C on an x86 platform, single inference latency is under 4~ms. To the best of our knowledge, this is the first work achieving real-time recognition of ten IoT waveform types. Future work will target deployment acceleration on embedded MCUs. Code and dataset are open-sourced at: https://github.com/Einstein-sworder/IoT-wave.
Radio frequency jamming poses a critical threat to the availability of wireless Industrial Internet of Things (IIoT) networks. Existing detection and classification techniques are poorly suited to this setting: coarse signal-strength and cross-layer features lack information richness, while raw I/Q baseband approaches require hardware and throughput that is impractical at the scale of hundred-node IIoT deployments. This paper presents CITADEL, a lightweight two-stage hierarchical pipeline that uses only Channel State Information (CSI) measurements, which are natively available on commodity IIoT devices, to detect and classify jamming attacks including previously unseen ones. While prior work has shown that jamming leaves observable CSI signatures, CITADEL is the first system to translate this insight into an end-to-end pipeline that jointly achieves closed-set classification of known attacks, open-set detection of zero-day attacks, and resistance to adversarial evasion. Evaluated across 6 known attack types and 15 zero-day scenarios, CITADEL achieves 100% known-attack detection and 97.1% zero-day detection at a 0.4% end-to-end false positive rate. Under adversarial evaluation spanning white-box and black-box threat models, gradient-based evasion remains below 2% across all tested perturbation budgets and the strongest published CSI attack generator achieves less than 5% average evasion. A systematic comparison against eight baselines confirms that no existing method achieves comparable performance on CSI data across all three axes: detection, generalization, and robustness. The full pipeline completes inference in 14.2 ms at 95.9 mJ on an edge GPU, establishing CITADEL as a practical solution for large-scale IIoT network security.
Wireless foundation models have emerged as a promising alternative to building separate models for each wireless task. However, existing approaches rely on masked input reconstruction, which can bias representations toward low-level signal details. In this paper, we propose LatentWave, a wireless foundation model pretrained using a Joint-Embedding Predictive Architecture (JEPA) on diverse wireless spectrograms and channel state information (CSI). By predicting masked regions in latent space, LatentWave learns representations that are more transferable out of the box across diverse downstream tasks. The proposed architecture employs per-channel patch embeddings with stochastic channel sampling during pretraining, allowing it to process variable antenna counts and improving usability across heterogeneous wireless configurations. We evaluate LatentWave on four downstream tasks: RF signal classification, 5G NR positioning, beam prediction, and LoS/NLoS classification, comparing against a masked-modeling baseline (WavesFM) pretrained on the same data. Additionally, we show that the masking geometry introduces a task-dependent inductive bias: frequency masking strongly favors channel-related tasks such as positioning and beam prediction, while region masking better preserves discriminability for signal classification.
Continuously recorded high-resolution waveform measurements provide rich information about fast power system dynamics. However, they require automated methods to identify events. This problem is addressed by developing a spectrogram-based framework to jointly detect, localize, and classify events in real-world continuously recorded waveforms at the terminal of an Inverter-Based Resource. We recast this problem as a temporal object detection problem on spectrogram images, as they capture the transient and harmonic signatures more explicitly than in raw waveform data. Each time-series waveform is transformed using the short-time Fourier transform, and the resulting per-channel spectrograms are stacked as a tensor for event detection. We benchmark this method against a detector operating directly on raw time-series measurements. Experiments on single-phase disturbances and three-phase faults demonstrate that the proposed spectrogram method consistently improves event detection, localization, and classification over the raw waveform baseline.