Analytical and Experimental Force Analysis of a Soft Linear Pneumatic Actuator

Soft pneumatic actuators are widely used in soft robotics because they can produce large motions while remaining compliant enough to interact safely with objects, environments, and the human body. However, their performance is not solely determined by pressure. Instead, the response depends on the way the actuator is built, including the shape of its chambers, the placement of reinforcements, the use of folds, material stiffness, and the constraints that guide its deformation. As the literature has expanded, it has become more difficult to determine which mechanism is most suitable for a given application and which reported results can be compared across studies. This review examines soft pneumatic actuators according to the design strategies used to generate four motion classes: linear, bending, twisting, and omnidirectional actuation. For each class, it analyzes the structural features that define the deformation path, including braid angle, fold geometry, fiber orientation, chamber arrangement, structural asymmetry, and internal constraint layers. It then discusses how the design choice affect motion output, force generation, air demand, repeatability, durability, fabrication difficulty, and robotic integration. The review further identifies key conditions that must be considered when selecting or comparing actuators, including pressure, loading condition, actuator size, pneumatic supply, and hysteresis This approach helps explain why actuators with similar motion outputs may differ substantially in design requirements, pneumatic demand, and practical suitability. It also highlights the design priorities needed for compact, efficient, repeatable, and deployable soft pneumatic systems in wearable, biomedical, and mobile robotic applications.

The increasing industrial demand for alternative actuators over conventional electromagnetism-based systems having limited efficiency, bulky size, complex design due to in-built gear-train mechanisms, and high production and amortization costs necessitates the innovation in new actuator development. Integrating bio-inspired design principles into linear actuators could bring forth the next generation of adaptive and energy efficient smart material-based actuation systems. The present study amalgamates the advantages of bipenniform architecture, which generates high force in the given physiological region and a high power-to-weight ratio of shape memory alloy (SMA), into a novel bio-inspired SMA-based linear actuator. A mathematical model of a multi-layered bipenniform configuration-based SMA actuator was developed and validated experimentally. The current research also caters to the incorporation of failure mitigation strategies using design failure mode and effects analysis along with the experimental assessment of the performance of the developed actuator. The system has been benchmarked against an industry-developed stepper motor-driven actuator. It has shown promising results generating an actuation force of 257 N with 15 V input voltage, meeting the acceptable range for actuation operation. It further exhibits about 67% reduction in the weight of the drive mechanism, with 80% lesser component, 32% cost reduction, and 8% energy savings and similar envelope dimensions for assembly compatibility with dampers and louvers for easy onsite deployment. The study introduces SMA coil-based actuator as an advanced design that can be deployed for high force-high stroke applications. The bio-inspired SMA-based linear actuator has applications ranging from building automation controls to lightweight actuation systems for space robotics and medical prosthesis.

This paper demonstrates the computational design of soft elastomeric pneumatic actuators using nonlinear topology optimization. An existing density- and porohyperelasticity-based topology optimization framework was extended from 2D to 3D and used to generate two manufacturable actuator designs, which were then studied numerically and experimentally. For both designs, the objective was to maximize the bending response for a prescribed actuation pressure under two different allowable strain limits. A key advantage of the employed topology optimization framework is that it can consistently, during the optimization, account for the very large deformations induced upon pressurization. The two optimized 3D designs were fabricated using stereolithography and experimentally tested to validate their performance.