Cuttlebot: a platform demonstration for complex, autonomous, bio-inspired swimmers
Authors: Alexander Nicholas White, Ang Leo Li, Alexander Yin, Derrick Roseman, Valeria Saro-Cortes, Hannah Wiswell, Aimy Wissa, Mihai Duduta
Organizations: School of Mechanical, Aerospace, and Manufacturing Engineering, University of Connecticut; Storrs, CT, U.S.A. · Department of Mechanical and Industrial Engineering, University of Toronto; Toronto, Ontario, Canada. · University of Connecticut, Institute of Materials Science; Storrs, CT, U.S.A. · Department of Mechanical and Aerospace Engineering, Princeton University; Princeton, NJ, U.S.A.
Abstract
Increasing interest in deep-sea operations and resources motivates the development of ecologically sensitive but environmentally durable robots. Dielectric elastomer actuator artificial muscles are good candidates for powering such systems due to their pressure and temperature tolerance and soft makeup, but they are difficult to integrate with robotic systems. This work presents an autonomous robotic platform: the CORE, capable of driving six artificial muscles while sensing visual and spatial information. To validate the platform, we developed the Cuttlebot - a cuttlefish-inspired robot that swims in three dimensions using undulatory fin locomotion. The Cuttlebot has four primary artificial muscles in its fins in addition to a tentacle-inspired soft gripper. The robot was evaluated in a series of tethered and untethered swimming tests, demonstrating a top speed of 2.5 centimeters per second translation and 10 degrees per second rotation. Furthermore, the CORE system was capable of driving specialized control signals into the artificial muscles to controllably output force and torque in six axes. This work provides a platform for developing complex, bio-inspired swimming robots for ocean exploration and monitoring, laying the foundation with our leading example: the Cuttlebot.
We present a palm-scale (65 mm, 34 g) swim-and-breach robot platform. Two vertically stacked propellers provide both propulsion and differential-thrust pitch control under a proportional-integral-derivative (PID) loop, and a tail rudder adds yaw control. The hull, evaluated by flow simulation, reduces the drag five-fold relative to an equivalent cuboid, and the propellers are optimized using B-series modeling validated by dynamometer measurements. The current robot swims at 13.9 body lengths per second and turns at 209 deg per second, corresponding to the upper limits reported for underwater robots. In free swimming, the pitch loop turns the body to any commanded nose-up pitch angle, and, with the rudder stabilizing the exit, the current robot leaps 1.6 body lengths high and 3.7 long in a seamless cruise-leap-cruise sequence. The platform can be used to build small-scale robots that cross barriers and dry gaps between pools for inspection in streams, flooded structures, and industrial systems.
Aquatic robots have expanded human access to underwater environments, yet many underwater spaces contain obstacles that can disrupt open-water locomotion. In "hydro-cluttered" environments, water is interspersed with rigid and flexible clutter, making body-obstacle contact unavoidable. Operating in these spaces requires robots that can regulate and exploit contact, but this regime remains difficult to model or simulate. Building on recent advances in mechanical intelligence in terradynamically capable limbless robotics, we develop principles for 3D aquatic locomotion using AquaMILR, an elongate limbless robot that combines bilateral cable-driven actuation, programmable body compliance, distributed depth regulation, corrosion-resistant enclosures, and onboard power and electronics for untethered field operation. Systematic robophysical experiments reveal that programmable body compliance regulates body deformation and converts body-environment interactions into fast, robust, forward progression across increasing hydro-clutter constraint strength. Depth regulation provides three-dimensional access, allowing the robot to bypass clutter, recover from obstruction, and continue through otherwise inaccessible routes. In potential jamming scenarios, emergent inertia-induced rolling acts as a spontaneous recovery mechanism, freeing the robot from clutter that would otherwise lead to failure and allowing locomotion to continue without additional control. Tests of the robot in an aquatic mangrove field demonstrate that these principles transfer to practical operation, enabling navigation and onboard visual inspection of inaccessible root zones. These results establish principles for hydro-cluttered locomotion and a design paradigm in which aquatic robots exploit environmental complexity as a locomotor resource.
Tianyu Wang, Matthew Fernandez, Galen Tunnicliffe +10
Underwater robotics has advanced significantly over recent decades. however, the development of miniaturized underwater robots remains limited by low energy densities of traditional power sources. Nature offers compelling solutions-organisms like mantis shrimps and fleas utilize latch-mediated spring actuation (LaMSA) systems that achieve rapid movements through a decoupled energy storage and release mechanism. Despite extensive studies of LaMSA, replicating such rapid, asymmetric actuation within simple, compact structures remains challenging. In this work, we introduce a bioinspired, soft bistable actuator with an integrated latch mechanism that enables asymmetric energy input and release using a single motor. Coupled with fin structures, this design facilitates efficient underwater propulsion and maneuverability. Experimental results demonstrate stable periodic flapping, precise steering, and a maximum thrust of 0.528 N, impulse of 0.147 Ns, and vertical displacement of 30 mm. By modulating fin angles, the robot achieves versatile motions, including vertical ascent, diagonal forward movement, and lateral translation. This study presents a novel, energy-efficient approach for controlling motion in compact underwater robots, paving the way for advanced biomimetic designs with potential applications in exploration, environmental monitoring, and inspection.