Humanoid loco-manipulation requires stable whole-body control under varying object masses and pickup/placement heights. This becomes particularly challenging in sim-to-real transfer, where object-induced load variation and robot-side dynamics mismatch interact during physical contact. Existing history-based adapters often compress these factors into a single latent representation, which can weaken robustness under heavy-load manipulation. We propose \textbf{SplitAdapter: Load-Aware Humanoid Loco-Manipulation via Factorized Adaptation}, which freezes a pretrained box manipulation policy and extends it with object/load and dynamics-aware context encoders trained with split world-model objectives, GRL-based cross-adversarial regularization, and hierarchical Feature-wise Linear Modulation (FiLM). In sim-to-sim experiments and real-world deployment, SplitAdapter improves Full-task success over the base policy and world-model FiLM baselines across object masses of 2, 4, and 6 kg and pickup/placement heights of 0, 30, and 60 cm, with the largest improvements under heavy-load conditions.
Bipedal loco-manipulation enables robots to interact with objects beyond the nominal workspace of their arms by coordinating locomotion and manipulation. Realizing this capability requires a low-level whole-body controller that translates task-level manipulation goals into coordinated arm and leg motions while maintaining balance. We present a unified whole-body controller trained with reinforcement learning that directly maps 6-DoF end-effector targets to coordinated actions for the bipedal base and robotic arm. Given only an end-effector target, the learned controller autonomously coordinates reaching, postural adaptation, and stepping without explicit base-velocity or footstep commands. A reward-gating strategy regulates the trade-offs among end-effector tracking, locomotion, and balance during training, while a temporal context estimator combines windowed Transformer encoding, recurrent GRU memory, and auxiliary dynamics prediction to extract dynamics-relevant information from observation history. Real-robot experiments demonstrate that the same controller supports reaching, postural adaptation, and stepping under commands from VR teleoperation, a learned diffusion policy, and scripted trajectories, providing a common end-effector interface for diverse manipulation tasks.
This paper presents a sim-to-real approach that enables legged robots to dynamically manipulate large and heavy objects with whole-body dexterity. Our key insight is that by performing test-time steering of a pre-trained whole-body control policy with a sample-based planner, we can enable these robots to solve a variety of dynamic loco-manipulation tasks. Interestingly, we find our method generalizes to a diverse set of objects and tasks with no additional tuning or training, and can be further enhanced by flexibly adjusting the cost function at test time. We demonstrate the capabilities of our approach through a variety of challenging loco-manipulation tasks on a Spot quadruped robot in the real world, including uprighting a tire heavier than the robot's nominal lifting capacity and dragging a crowd-control barrier larger and taller than the robot itself. Additionally, we show that the same approach can be generalized to humanoid loco-manipulation tasks, such as opening a door and pushing a table, in simulation. Project code and videos are available at https://sumo.rai-inst.com/.
Training vision-language-action (VLA) policies for humanoid loco-manipulation is constrained by the high cost and complexity of collecting human teleoperation demonstrations. VLA policies fine-tuned in simulators have, until now, failed to transfer effectively in humanoid loco-manipulation tasks. We present LEGS (Loco-manipulation via Embodied Gaussian Splatting), a hybrid simulator that composites a mesh foreground (robot, objects, props) over a photorealistic 3D Gaussian Splatting (3DGS) background reconstructed from a handheld scene capture. LEGS uses a procedural motion-primitive generator to synthesize labeled demonstrations at scale without human teleoperation, and a deterministic two-stage color calibration to align the rendered 3DGS image to the robot's deployment camera. On a Unitree G1 humanoid robot, across three pick-and-place tasks of increasing whole-body difficulty and three VLA backbones (psi_0, pi_0.5, GR00T N1.6), a policy trained purely on LEGS data matches or exceeds one trained on human teleoperation demos on every experiment. It also outperforms a mesh-only simulation baseline that ablates the effect of the 3DGS background, showing that photorealistic rendering is a key enabler for synthetic data transfer. Humanoid motion is recorded independently of scene appearance in LEGS, allowing the same auto-generated demonstrations to be re-rendered under new backgrounds and object meshes--covering a new scene at more than 15x lower cost than teleoperation--to augment training data for robustness to scene variations. Under combined object-and-scene appearance shift, the policy trained on re-rendered LEGS-AUG data maintains task success while the baseline trained on teleoperation data fails entirely. Our project page is located at https://legsvla.github.io/.