Vision-Guided Dual-Arm Humanoid Robotic Disassembly of End-of-Life 18650 Lithium-ion Battery Packs

Grasping and holding tools while using them presents a considerable challenge not only for robots but also for humans. Such a challenge is particularly noticeable in processes involving assembly and disassembly, where efficiency and consistency depend on performing rapidly adaptive tasks. Nonetheless, contemporary robotic grasping technologies that can securely manipulate tools during operation frequently have significant constraints. In this paper, introduce ARTiS (Adaptive Robotic Tool Gripper in Disassembly Systems), a novel gripper that combines the adaptability of soft grippers, the dexterity of anthropomorphic hands, and the robustness of rigid mechanisms with a soft palm and fingertips. This unique combination makes it possible to hold tools securely in a variety of situations through using active jamming in the palm and fin-ray adaptation in fingertips. Furthermore, high finger dexterity is achieved through the seven degrees of freedom design, which enables the fingertips to orient to any surface, both for automated solutions and collaborative tasks. A comprehensive evaluation was conducted using a range of conventional disassembly tools to assess the gripper's compliance, durability, and functional versatility. More information, hardware instructions, and videos at https://romanmykhailyshyn.github.io/artis/

The need for detecting and sorting batteries is drastically increasing for many applications. This study proves the potential of transfer learning in predicting whether the image contains a battery or not, the location and identifying three types of batteries, namely: prismatic, pouch, and cylindrical Lithium-Ion Batteries (LIB). Particularly, it focuses on the transfer learning method in two applications: Training a large-scale dataset to detect electronic devices using a pre-trained YOLOv5m, then using these latter trained weights to detect and classify the batteries. The precision of battery detection achieves 94%, which outperforms the pretrained YOLOv5m weights with 5%, in 22 ms inference time.

Human-Robot Collaboration (HRC) plays a vital role in dynamic, high mix, low volume industrial scenarios such as remanufacturing, which frequently face workcell rearrangements. Traditional setups are constrained by power and data cabling, restricting modularity and reconfigurations, while the selection of commercial wireless devices suitable for real-time perception and safe collaboration are limited in availability. This paper presents a highly flexible, wireless, 5G-based system that serves as a versatile experimental testbed for applications including remanufacturing, operator training, and user studies. To eliminate infrastructure barriers, the workcell integrates a novel battery-powered, multi-sensor platform prototype. Additionally, to support operator safety and system adaptability across environmental shifts, the system integrates a computer vision module for object detection and pose estimation, further augmented for robust hand recognition. Trained on synthetic and real data, the model reliably detects oriented grasping poses and human hands across varying lighting and background conditions (with an mAP@50-95 of 97.74 +- 0.10% and a mean inference time of 12.5 ms). Offloading these computationally intensive tasks to the edge via 5G, the proposed architecture contributes to resolving the bandwidth-latency trade-off. To demonstrate portability, the system was implemented in both Hungary and Norway, and was evaluated across a combination of public and private, Standalone and Non-Standalone 5G infrastructures. The performed network experiments produced results in round-trip response times down to 12 ms in case of compatible network-device pairings, suitable for safe, adaptive HRC. However, these measurements also revealed practical limitations related to interoperability in current 5G deployments that should be addressed in future works.