Robotic Nonprehensile Object Transportation with a Hanging Tray
Authors: Adam Heins, Angela P. Schoellig
Organizations: University of Toronto · Toronto, Canada · Technical University of Munich · Munich, Germany
Abstract
We consider the nonprehensile object transportation task known as the waiter's problem, in which a robot must move an object balanced on a tray from one location to another. In contrast to prior works on the robotic waiter's problem, which make the robot tilt a tray rigidly held by its end effector (EE), we use a tray suspended from the EE by ropes, such that it behaves like a three-dimensional pendulum. Some prior works have actuated the robot so that the EE simulates the behavior of a pendulum, because pendular motion reduces the shear forces acting on the transported objects, minimizing the sliding of rigid objects and sloshing in containers of liquid. In contrast, our use of a real hanging tray allows us to obtain the benefits of pendular motion while only actuating a 3 degree-of-freedom (DOF) mobile base, rather than requiring a full 6-DOF manipulator arm. Our experiments in simulation and on real hardware show that the hanging tray substantially reduces both sliding and sloshing compared to a static, rigidly-grasped tray. Furthermore, we integrate the hanging tray into an interactive robot waiter demonstration, which uses computer vision to identify people with a raised hand and visual servoing to steer toward them and allow them to access the tray.
What appears effortless to a human waiter remains a major challenge for robots. Manipulating objects nonprehensilely on a tray is inherently difficult, and the complexity is amplified in dual-arm settings. Such tasks are highly relevant to service robotics in domains such as hotels and hospitality, where robots must transport and reposition diverse objects with precision. We present DART, a novel dual-arm framework that integrates nonlinear Model Predictive Control (MPC) with an optimization-based impedance controller to achieve accurate object motion relative to a dynamically controlled tray. The framework systematically evaluates three complementary strategies for modeling tray-object dynamics as the state transition function within our MPC formulation: (i) a physics-based analytical model, (ii) an online regression based identification model that adapts in real-time, and (iii) a reinforcement learning-based dynamics model that generalizes across object properties. Our pipeline is validated in simulation with objects of varying mass, geometry, and friction coefficients. Extensive evaluations highlight the trade-offs among the three modeling strategies in terms of settling time, steady-state error, control effort, and generalization across objects. To the best of our knowledge, DART constitutes the first framework for non-prehensile dual-arm manipulation of objects on a tray. Project Link: https://dart-icra.github.io/dart/
Autrio Das, Shreya Bollimuntha, Madala Venkata Renu Jeevesh +5
In this letter, we present a hierarchical control framework that enables wheeled bipedal robots to perform planar object sliding tasks with their wheeled legs. The proposed approach formulates a nonlinear model predictive controller (NMPC) based on a reduced-order three rigid bodies (TRB) dynamical model that explicitly accounts for the hip roll degree of freedom and multiple wheel-environment contact modes, which is essential for lateral stepping and pedipulation tasks. Within this framework, the NMPC simultaneously regulates robot locomotion and interaction forces, allowing the robot to stably execute both rolling and object manipulation behaviors. A trajectory-optimization-based robot-object motion planner is developed to generate reference motions that incorporate stick-slip transitions in ground-object contact. Two representative pedipulation motions, namely scooting and lateral sliding, are validated through real-world hardware experiments, in which the robot successfully retrieves a 1 kg object from under a desk and slides a 4 kg object over a distance of 0.228 m via scooting.
Manipulating suspended payloads with humanoid robots is challenging because the robot can only influence an underactuated, oscillatory load through whole-body motion and intermittent contact. Imitation learning provides safe initial behavior but does not directly optimize final placement, while reinforcement learning from scratch is unsafe and sample-inefficient on real humanoids. We present HOIST-Humanoid Optimized with Imitation and Sample-efficient Tuning for manipulating suspended loads. HOIST first finetunes a high-level vision-language-action (VLA) policy from virtual-reality (VR) teleoperation demonstrations and executes its commands through a whole-body controller. It then uses VLA rollouts and iterative batched RL to improve placement accuracy and stopping behavior. Experiments in simulation and on a real humanoid show that HOIST improves over imitation-only and additional-demonstration baselines; compared with pure VLA rollouts, HOIST reduces translational placement error by 19.9 cm and raw angular error by 3.56 degrees, demonstrating the potential of humanoids for underactuated material-handling tasks.