cs.CEJun 9, 2026

A Constrained Natural-Language Interface for Variational Multi-Physics Finite Element Simulations in FEniCS

Authors: Nilay Upadhyay, Wesley F. Reinhart

Abstract

Large language models can reduce the manual effort required to set up finite element simulations, but they introduce reliability risks when generated solver code lies on the critical path. We present a constrained natural-language interface for multi-physics finite element analysis in which the LLM is limited to front-end tasks: parsing prompts into structured JSON, generating Gmsh code only for non-catalog geometries, and using retry feedback for those stages. It never writes FEniCS solver templates, derives weak forms, or writes the numerical solver core. A deterministic dispatcher maps the validated specification to five human-written FEniCS/UFL templates: linear elasticity, hyperelasticity, elastoplasticity, thermo-mechanical coupling, and phase-field fracture. We validate this deterministic template layer against analytical solutions and published 2D/3D benchmarks. Smooth cases reach sub-percent agreement on adequate meshes, while harder nonlinear cases reach the 2-5 percent range. We also evaluate the LLM-facing front end directly. In a 15-prompt parser benchmark, first-pass valid parses were obtained for 9 cases, and all remaining cases were repaired after retry, giving a final valid parse rate of 100.0 percent, 100.0 percent problem-class accuracy, and 97.1 percent field-extraction accuracy. In a 10-case custom-geometry benchmark routed through the real LLM-to-Gmsh path, first-pass and final success were both 90.0 percent, with one unrecovered invalid-geometry failure. These results show that the parser and constrained prompt/validation design are effective on these benchmarks. As an end-to-end demonstration, the system generates and analyzes a 3D elastoplastic L-bracket with a fillet and bolt hole from one natural-language prompt. The contribution is a measured architecture for natural-language-driven variational simulation, not open-ended autonomous code generation.

Explore similar work

CardsList
May 10, 2026cs.LG

Your Simulation Runs but Solves the Wrong Physics: PDE-Grounded Intent Verification for LLM-Generated Multiphysics Simulation Code

Execution-based evaluation of LLM-generated code implicitly treats successful execution as a proxy for correctness. In scientific simulation, this proxy is insufficient: a generated input file can run, mesh, and converge while encoding governing equations that differ from the user's intent. We call this mismatch between intended physics and generated code the comprehension-generation gap. We instantiate this in MOOSE, where Kernel and BC objects map compositionally to weak-form residual terms, enabling deterministic reconstruction of the encoded PDE and comparison against an intended contract. We formalize this comparison as the Intent Fidelity Score (IFS), a structural metric covering governing terms, BCs, ICs, coefficients, and time scheme. Building on IFS, we develop a PDE-grounded refinement loop that uses deterministic violation reports to correct generated code iteratively. We evaluate on MooseBench, a 220-case multiphysics benchmark with PDE-level ground truth released with this work. On this benchmark, our method consistently improves mean IFS over direct generation, with gains concentrated on hard cases. On the subset where direct generation falls below IFS 0.7, refinement adds +0.22 to +0.41 absolute IFS. In the deployment audit, execution-only repair improves execution success while leaving 39-40% of all 220 cases runnable but still solving the wrong physics across the three main deployment-audit models, exposing executability and intent fidelity as separable failure modes. Static proof-of-concept experiments on four PDE-oriented DSLs (UFL/FEniCS, FreeFEM, FiPy, and Devito) suggest that the reconstruction-and-comparison pattern extends beyond MOOSE. These findings reinforce that executable simulation code should be verified against the mathematical structure it is intended to encode, not accepted on execution alone.
Zhenghan Song, Yulong Liu, Cheng Wan +4
AI Code GenerationPhysics SimulationCorrectnessFinite Element MethodPhysicsReproducibility
AskPDF
Jul 8, 2026cs.GR

GReFEM: Multimodal LLMs as Zero-Shot Semantic Assistants for Physics-Guided 3D Mesh Refinement

Adaptive volumetric finite element meshing is a critical step in computer-aided engineering and analysis that dictates the computational budget of a given problem. It traditionally requires iterative PDE solvers or heavily supervised, data-driven surrogates trained on large-scale simulation data. While Multimodal Large Language Models (MLLMs) excel in 2D visual tasks, their zero-shot capability to semantically ground regions based on geometric understanding and physics remains an open question. Overall, this study explores a significant question: can the high-level semantic understanding of off-the-shelf MLLMs serve as a viable, zero-shot geometric proxy for finite element mesh refinement? To investigate this, we introduce GReFEM (Geometric Reasoning Enhanced Multimodal LLMs for Finite Element Meshing), a framework that utilizes MLLMs to visually localize stress-critical regions based on physics-guided textual prompts. To bridge the gap between 2D MLLM pre-training and 3D geometries, we introduce orthoViews, a view-selection module that maximizes the observability of key geometric features. We conduct an in-depth empirical evaluation across diverse CAD geometries, loading cases, and SOTA MLLMs, comparing them against a tuned geometric heuristic under a strict, matched refinement budget. Our findings reveal that MLLMs demonstrate robust zero-shot capacity to accurately follow complex spatial-physical instructions, isolating stress-relevant features with higher precision than blind heuristics. By mapping both the successes and current limitations of MLLMs in physical grounding, this study defines the frontier of foundation models as semantic assistants in automated simulation workflows.
Kartik Bali, Mahish K. Guru, Christian J Cyron +1
Finite Element MethodMeshesLarge Multimodal ModelsComputer-Aided Design
AskPDF
May 28, 2026cs.AI

A Multi-AI-agent Framework Enabling End-to-end Finite Element Analysis for Solid Mechanics Problems

Finite element analysis (FEA) is the most important numerical approach for solid mechanics. Challenges of FEA include a steep learning curve for entry-level users and potential false simulations due to incorrect definitions of key simulation components, such as boundary conditions, load cases, and solution variables. Years of engineering experience are usually necessary for real-world problem-solving. To address these issues, we present AbaqusAgent, a multi-agent framework grounded in large language models (LLMs) for solid mechanics analyses. AbaqusAgent is developed to facilitate analysis case generation and execution using Abaqus, one of the most widely used FEA packages, by turning users' natural-language instructions into executed FEA analyses and result visualization. AbaqusAgent is composed of six agents, including interpreter, architect, input writer, runner, reviewer, and visualizer agents, encompassing all the essential pre-processing and post-processing steps of standard FEA analyses. A wide variety of 50 solid mechanics problems have been successfully validated, achieving an overall success rate of 86%. Beyond improving the efficiency of FEA for solid mechanics problems and lowering the barrier to computational mechanics education, AbaqusAgent advances the human-simulation interaction paradigm and enables integration with AI-empowered optimization and material characterization workflows. The code is available at https://github.com/LIRAM-LIN/AbaqusAgent
Titu Ranjan Sarker, Muhammed Jawaad Zulqernine, Ling Yue +3
Finite Element MethodContinuum Dynamics
AskPDF