Organizations: 1Electrical and Computer Engineering Department, University of California, Los Angeles, CA, 90095, USA · 2Bioengineering Department, University of California, Los Angeles, CA, 90095, USA · 3California NanoSystems Institute (CNSI), University of California, Los Angeles, CA, 90095, USA
Abstract
We introduce a wavelength-addressable diffractive optical network that transforms illumination wavelength into a high-dimensional control parameter for arbitrarily programmable 2D beam steering. The proposed passive architecture comprises cascaded spatially optimized diffractive layers, jointly designed using deep learning, to rapidly map distinct wavelengths to predefined/desired output angles. Unlike conventional single-layer dispersive optical elements, which are physically restricted to 1D linear mapping, this framework harnesses complex wavefront transformations to utilize the illumination wavelength as an intrinsic addressing key for arbitrary 2D beam steering, eliminating the need for mechanical scanning or electronic phase control. We numerically demonstrate wavelength-controlled beam steering across 625 wavelength channels spanning 400-750 nm, realizing a 25 x 25 array of independently addressable beam positions with subwavelength positioning accuracy and high channel fidelity. Unlike conventional gratings, which constrain wavelength routing to a linear trajectory, the proposed diffractive network performs nonlocal wavefront transformations, enabling arbitrary wavelength-to-angle mappings across a 2D field of view. We further validate the proposed framework experimentally in both the terahertz and visible spectral regimes, demonstrating wavelength-multiplexed beam steering using 3D fabricated passive diffractive layers at terahertz frequencies and phase-only spatial light modulators in the visible spectrum. This wavelength-addressable diffractive architecture establishes a compact and scalable paradigm for high-speed programmable beam steering, with potential applications in optical communications, routing, imaging, sensing, and emerging photonic information-processing systems.
Diffractive deep neural networks (D2NNs) promise miniaturized, power-efficient, light-speed optical front-ends for machine vision, yet the most mature demonstrations remain in the terahertz regime, built from readily fabricated millimeter-scale neurons. Translating D2NNs to the visible range, where nearly all vision pipelines operate, was long blamed on the difficulty of fabricating nanoscale neurons; but even after recent advances removed that barrier, visible-range D2NNs matching their terahertz counterparts remain out of reach. We identify the true obstacle as the thin-layer approximation underlying nearly all D2NN training, which treats each diffractive layer as an infinitely thin mask. It fails not because of the short wavelength, as is commonly assumed, but because the low-refractive-index materials (n approximately 1.3-1.5) used at visible wavelengths require relief structures thick enough that intra-layer diffraction and phase accumulation become significant. To overcome this, we introduce a differentiable beam-propagation (∂BPM) layer that models each element as a finite-thickness volume and propagates light through it during training, keeping the fabrication-compatible height map end-to-end trainable without full-wave simulation in the loop. Across MNIST, Fashion-MNIST, and CIFAR-100 classification and imaging, ∂BPM training substantially reduces the design-to-device mismatch, and full-wave FDTD validation raises classification accuracy from 50% to 90% without re-optimization. The ∂BPM layer thus offers a scalable, physics-aware bridge between efficient optical neural-network optimization and fabrication-consistent diffractive design.
We demonstrate that nonlinear computing can be achieved with a single linear diffractive surface under coherent illumination. We introduce a compact encoder-decoder co-localization (E+D) architecture in which an input-dependent dynamic encoder and a static optimized decoder are integrated within the same phase-only diffractive plane. Following free-space propagation, coherent interference between the encoder and decoder fields, combined with intensity detection, generates programmable nonlinear input-output mappings without requiring nonlinear optical materials or multiple diffractive layers. We prove that the proposed E+D optical processor is a universal approximator for arbitrary real-valued band-limited nonlinear functions and identify the physical factors governing its approximation fidelity, including the decoder degrees-of-freedom, detector aperture, and axial propagation distance. Crucially, we demonstrate that introducing a trained, frozen phase bias to the encoder region systematically enhances functional expressivity, providing robustness against coarse phase quantization on spatial light modulators. Using this framework, we accurately synthesize diverse nonlinear functions, including commonly used neural network activation functions and complex-valued nonlinear functions. Finally, we experimentally validate the proposed approach using a visible-light optical set-up trained through in situ learning, demonstrating the parallel approximation of 9 nonlinear functions in a single optical forward pass. By collapsing nonlinear optical computation into a single diffractive surface, the E+D architecture substantially reduces hardware and alignment complexity while preserving powerful function-approximation capabilities, providing a compact and scalable framework for analog information processing.
Yuntian Wang, Alexander Chen, Md Sadman Sakib Rahman +1
The efficiency of high-power laser systems is limited by wavefront distortions in the beam, particularly non-common path aberrations, which reduce the peak intensity at the focal plane. Compensating for these aberrations requires the calibration of the adaptive optics system. Conventional calibration methods rely on a time-consuming iterative optimization that is highly sensitive to initial conditions. While deep learning-based models offer high speed, they often demonstrate insufficient accuracy. In this work, we present a hybrid wavefront reconstruction method that combines a convolutional neural network to generate an initial estimate of the wavefront distortions, with the L-BFGS (Limited-memory Broyden-Fletcher-Goldfarb-Shanno) algorithm for its subsequent refinement. In numerical simulations, the method achieved an efficiency of ∼0.99 in 80% of the cases for a root-mean-square (RMS) of wavefront distortions ranging from 0 to 1.3λ. In a physical experiment, for initial wavefront distortions with RMS values from 0.15 to 0.6λ, the method achieved an efficiency of ∼0.75. As a result, focusing with a Strehl ratio of 0.96±0.02 was attained within 2 to 4 iterations of the algorithm, confirming the applicability of the method for the fast and accurate calibration of adaptive optics systems under real experimental conditions.