A Novel Bio-Inspired Fish Robot with Tunable Stiffness via Particle Jamming

In this paper, we introduce the Soft Lamprey-Inspired Dual Environment Robot (SLIDER) and a proper modeling and optimization procedure employed to design the robot. We represent the primary fluid environment actions - inertial effects, vortex forces, and viscous dissipation - using Lighthill's theory for large-amplitude elongated bodies. For structural design parameters such as internal pressure, tail size, and body stiffness, a fast, geometrically and materially nonlinear model is developed and validated. The fluid-structure interaction equations are solved implicitly with an efficient second-order box method. A pneumatic manifold robotic system is employed to actuate SLIDER in a quiescent water tank environment, allowing cross-comparison of computational and experimental results. We find that low-frequency swimming is dominated by resistant environmental forces, whereas higher-frequency swimming is primarily affected by inertial fluid forces. Using our efficient model alongside a genetic algorithm, we co-optimize a swimming control pattern and caudal fin design (subject to SLIDER's climbing morphology) to achieve a tethered swimming speed of 21.7 +/- 0.4 cm/s (0.59 Bl/s). Furthermore, we investigate the optimization procedure for a multimodal robot performing both swimming and climbing tasks.

Underwater robotics has advanced significantly over recent decades. however, the development of miniaturized underwater robots remains limited by low energy densities of traditional power sources. Nature offers compelling solutions-organisms like mantis shrimps and fleas utilize latch-mediated spring actuation (LaMSA) systems that achieve rapid movements through a decoupled energy storage and release mechanism. Despite extensive studies of LaMSA, replicating such rapid, asymmetric actuation within simple, compact structures remains challenging. In this work, we introduce a bioinspired, soft bistable actuator with an integrated latch mechanism that enables asymmetric energy input and release using a single motor. Coupled with fin structures, this design facilitates efficient underwater propulsion and maneuverability. Experimental results demonstrate stable periodic flapping, precise steering, and a maximum thrust of 0.528 N, impulse of 0.147 Ns, and vertical displacement of 30 mm. By modulating fin angles, the robot achieves versatile motions, including vertical ascent, diagonal forward movement, and lateral translation. This study presents a novel, energy-efficient approach for controlling motion in compact underwater robots, paving the way for advanced biomimetic designs with potential applications in exploration, environmental monitoring, and inspection.

Soft robots leverage compliant materials to generate motion through controlled elastic deformation, making them ideal for delicate tasks such as underwater exploration and biomimetic marine systems. Although hydraulic/pneumatic actuation remains pivotal for such systems, the lack of systematic design frameworks has hindered the development of robots capable of complex 3D motion, such as fish-like swimming. This work introduces a topology optimization method to automate the design of a hydraulic soft fish tail, explicitly addressing the design-dependent coupling between fluidic actuation and structural deformation. We use a Darcy law-based model augmented with a drainage term to simulate spatially varying hydraulic pressure loads, translating these into consistent nodal forces via finite element analysis. The employed robust multi-criteria optimization formulation balances deformation efficiency, fluid-structure interaction, geometric manufacturability, and required stiffness for optimizing a bioinspired soft fish tail for 3D swimming kinematics. The optimized tail topology is incorporated into a pneumatic network actuator and computationally validated under various hydraulic loads, achieving tunable undulatory amplitudes and multiaxis bending for depth adjustment. The optimized 2D tail outperforms its rectangular counterpart. By cascading optimized tail segments, we demonstrate programmable swimming patterns in soft robotic fish tails at different hydraulic loads. This work advances the systematic codesign of hydraulic actuators and soft structures, offering a pathway to automate underwater robots with optimized design and vertebrate-like agility in confined aquatic environments. Our implementations and simulations are publicly available at 'https://github.com/PrabhatIn/TO-SoFiT'.