Organizations: Department of Mechanical Engineering and Robotics, Guangdong Technion-Israel Institute of Technology, Shantou, China. · Department of Applied Electronics, Faculty of Advanced Engineering, Tokyo University of Science, Tokyo, Japan. · Tongchen Lin, Chuhan Zhang, Ruigang Chen, Yizhar Or, and Mingyi Liu: Faculty of Mechanical Engineering, Technion-Israel Institute of Technology, Haifa, Israel.
Abstract
This paper proposes an energy-recycling rimless wheel with spring-clutch legs. The proposed mechanism uses a lockable clutch to store part of the impact-induced elastic energy after foot contact and reinject it in the next gait cycle. First, we develop a hybrid dynamic model of the energy-recycling rimless wheel. Second, numerical simulations are used to examine the dynamics, local stability of periodic gaits, and the Cost of Transport (CoT) of the proposed mechanism. The simulation results show that the proposed mechanism reduces the CoT by up to 16.13% compared with a benchmark viscoelastic-legged rimless wheel with telescopic spring-damper legs. Compared with the rigid rimless wheel, the viscoelastic-legged and energy-recycling models reduce the CoT by more than 50%. The energy-recycling model also maintains locally stable periodic gaits over the tested slope and stiffness ranges. Finally, prototype experiments on an inclined plane are conducted to examine the feasibility of the proposed mechanism. The experimental results show that the proposed rimless wheel achieves passive walking on a shallow 1° slope, corresponding to a CoT of approximately 0.02. These results suggest that the proposed spring-clutch mechanism can improve the simulated walking efficiency of the energy-recycling rimless wheel, while the prototype experiments support the feasibility of passive walking with the mechanism.
Quadruped robots are often designed with rigid feet to simplify control and maintain stable contact during locomotion. While this approach is straightforward, it limits the ability of the legs to absorb impact forces and reuse stored elastic energy, leading to higher energy expenditure during locomotion. To explore whether compliant feet can provide an advantage, we integrate foot compliance into a reinforcement learning (RL) locomotion controller and study its effect on walking efficiency. In simulation, we train eight policies corresponding to eight different spring stiffness values and then cross-evaluate their performance by measuring mechanical energy consumed per meter traveled. In experiments done on a developed quadruped, the energy consumption for the intermediate stiffness spring is lower by ~ 17% when compared to a very stiff or a very flexible spring incorporated in the feet, with similar trends appearing in the simulation results. These results indicate that selecting an appropriate foot compliance can improve locomotion efficiency without destabilizing the robot during motion.
This study proposes a reconfigurable rocker-bogie mechanism that achieves efficient turning motion with a small number of actuators while maintaining high step-climbing capability. By installing motors at the bogie joints and actively swinging up and down bogies, the system enables switching between four-wheel and six-wheel configurations. Omnidirectional wheels are mounted on the rear ends of the rockers, allowing smooth turning in the four-wheel configuration based on a differential-drive model. Experimental evaluation using a prototype robot demonstrated that the proposed mechanism achieves zero-radius turning at a speed more than five times that of a conventional rocker-bogie mechanism equipped with six non-steerable grip wheels, while requiring only approximately 17% of the total average wheel torque. In addition, the robot successfully climbed a 40 cm step with an average climbing time of 6.4 s, confirming its high turning and step-climbing performance.
Although aerial-legged robots offer combined agility and efficiency, controlling high-speed hopping under complex hybrid dynamics is challenging. Reinforcement Learning (RL) is promising but prone to energy-inefficient "reward hacking". We propose a Dynamics-Informed RL framework for a monopedal hopping quadcopter. By embedding a target Specific Energy into the reward, we constrain the optimization to a physically viable energy manifold, ensuring stable hopping behaviour. By rewarding the phase-consistent behavior, it can encourage bio-inspired stance-phase impulse. Furthermore, penalizing the electro-mechanical power waste induces the motors generate an efficient impulse. This enables the policy to inject energy strictly during spring restitution without heuristic state machines. MuJoCo simulations validate robust height regulation and forward velocity tracking up to 2.0 m/s despite severe attitude-contact coupling. Ultimately, our approach yields a highly agile hopping gait, reducing energy consumption by 82% and 73% compared to hovering baselines and inefficiency baseline, respectively.