Improving Robotic Imitation Learning via Trajectory Standardization
Authors: Licheng Yang, Lingfeng Qian, Fei Zheng, Yonghao He, Wei Sui, Shuangshuang Li, Hu Su
Abstract
Imitation learning for robotic manipulation relies on large sets of human demonstration trajectories, which are often noisy and temporally irregular due to variable operator speed, intermittent pauses, and inconsistent action density. A common preprocessing strategy is time-uniform downsampling to shorten sequences, but it cannot effectively remove speed-induced non-uniformity or redundant pauses. This mismatch degrades data quality and hinders policy learning. To address this issue, we propose Information-Standardized Trajectory Resampling (ISR), an offline preprocessing method for effective imitation learning. ISR resamples each trajectory by enforcing approximately equal information distance between adjacent points. Specifically, we map trajectories onto an information-modulated Riemannian manifold and perform geodesic-equidistant parameterization. We construct an information-intensity field from velocity and acceleration norms: the velocity term removes small-motion redundancy, while the acceleration term preserves high-curvature and fine-manipulation phases. We evaluate ISR on three real-world manipulation tasks with mainstream imitation learning policies. Compared with the baseline time-uniform 3x downsampling, ISR improves task success rates by about 25%, remains robust across datasets collected from different operators, and reduces both dataset size and training cost. The code and videos are publicly available at https://d-robotics-ai-lab.github.io/isr.page.
Imitation learning enables robots to acquire complex manipulation skills from demonstrations, but its effectiveness is limited by the cost of collecting high-quality data. Trajectory-level data augmentation methods alleviate this challenge by recombining expert demonstrations under varied initial states. However, such methods typically insert interpolations or other non-expert transition segments between disjoint parts, and such non-expert segments could reduce the quality of the generated data. This paper introduces Minimizing Interpolation (MinInter), an effective trajectory selection method that, for each sampled initial configuration, chooses the source demonstration requiring the least interpolation to form a complete trajectory. By explicitly minimizing interpolations during data generation, MinInter produces higher-quality synthetic demonstrations while remaining compatible with existing data generation frameworks. Experiments on 12 manipulation tasks with 26 variants from the MimicGen benchmark show that MinInter consistently improves both data generation success rates and policy success rates, with the largest gains on contact-rich, long-horizon and high-variance settings. Compared to the recent SkillGen framework, MinInter achieves higher policy success rates despite its conceptual simplicity, underscoring the value of interpolation minimization for data augmentation.
For imitation learning in robotic manipulation, high data collection costs result in the scarcity of high quality data. In this paper, we leverage the inherent heterogeneity of trajectories to address this challenge. Based on our observations of manipulation tasks, we categorize motions into transitional, precise, and agile types, defining the latter two as trajectory saliency due to their criticality to task success in contrast to the prevalent but less relevant transitional motions. Therefore, we propose the Trajectory Saliency Detector (TSD), a training-free and plug-and-play framework to identify trajectory saliency. TSD employs two physically-grounded metrics: spatial entropy to capture fine-grained manipulation and centripetal acceleration to detect agile maneuvering. We further leverage TSD to develop a dataset compression method that reduces training costs and a dataset expansion strategy that improves data collection efficiency. Extensive experiments in both simulation and real-world settings demonstrate that models trained on TSD-condensed datasets achieve comparable or even superior performance with 25% less data on average. These results validate the effectiveness of our dataset compression and expansion strategies, thereby confirming the utility of TSD. Consequently, TSD offers a scalable and cost-effective pathway to synthesize information-dense datasets for efficient robot learning. Project page: https://trajectory-saliency-detector.github.io/trajectory-saliency-detector/
While learned robotic policies hold promise for advancing generalizable manipulation, their practical deployment is often hindered by suboptimal execution speeds. Imitation learning policies are inherently limited by hardware constraints and the speed of the operator during data collection. In addition, there are no established methods for accelerating policies learned via imitation, and the empirical relationship between execution speed and task success remains underexplored. To address these issues, we introduce SpeedTuning, a reinforcement learning framework specifically designed to enhance the speed of manipulation policies. SpeedTuning learns to predict the optimal execution speed for actions, thereby complementing a base policy without necessitating additional data collection. We provide empirical evidence that SpeedTuning achieves substantial improvements in execution speed, exceeding 2.4x speed-up, while preserving an adequate success rate compared to both the original task policy and straightforward speed-up methods such as linear interpolation at a fixed speed. We evaluate our approach across a diverse set of dynamic and precise tasks, including pouring, throwing, and picking, demonstrating its effectiveness and robustness in enhancing real-world robotic manipulation. Videos and code are available at https://daivdyuan.github.io/speed-tuning/