Enhancing perceptual dimensions while miniaturizing imaging systems presents significant challenges for high-dimensional visual sensing. Conventionally, the acquisition of the 5D (x,y,u,v,λ) spectral light field (5D-SLF) data cube relies on bulky and expensive camera arrays, which are impractical for widespread application. Existing single-detector systems are fundamentally limited by a trade-off between the resolutions of different dimensions owing to insufficient coding capabilities. Here we introduce an Aperture-aware Dispersion Light-field Imaging Spectrometer (ADLIS), that targets a synergy between compactness and resolution through aperture-multiplexed modulation, leveraging the inherent spectral-filtering properties of birefringent material. Using only a manufacturing-friendly and cost-effective phase plate made of birefringent quartz crystal, the aperture of the proposed ADLIS enables compact angular-spectral encoding that is highly sensitive to both the incident angle and spectrum of incoming light. In contrast to the viewpoint-separation approach of microlens arrays, ADLIS employs aperture encoding to superimpose all viewpoints onto each sensor pixel. This shifts the design paradigm from spatial division to encoding integration, aiming to achieve full-resolution light field recovery. Thus, we develop the Aperture-aware Dispersion Light-field Imaging (ADLI) framework, which optimizes the aperture design and 5D-SLF reconstruction in an end-to-end (E2E) manner. Trained by simulation data and validated through real-world experiments, our system achieves robust high-performance 5D-SLF imaging while maintaining full spatial resolution.
Snapshot hyperspectral imaging avoids sequential scanning, but systems that jointly achieve stable reconstruction, low cost, and compact optics remain limited. We present a snapshot hyperspectral imaging system based on angular-to-spectral diversity conversion. A tapered kaleidoscope creates replicated views with distinct incidence directions, and a directly attached birefringent filter converts them into view-channel-dependent spectral transmittances, yielding complementary measurements that better condition the inverse problem for more stable single-shot spectral reconstruction. The system preserves a simple pixel-wise linear model for fast non-learning-based reconstruction and uses only off-the-shelf components without relay optics or cascaded modules. We select the birefringent filter configuration using a condition-number-based criterion and validate the system on both synthetic and real data.
Traditional glass-based optics are typically optimized for narrow spectral bands, such as the visible (400-700nm) or shortwave infrared (1000-1800nm). While the emergence of VIS-SWIR sensors (400-1700nm) offers transformative potential, refractive optics struggle to focus this entire range simultaneously. Mirrors represent a promising achromatic alternative; however, they are often sidelined by field curvature, and off-axis aberrations. This paper introduces Computational Mirrors, a framework that enables high-resolution, wide-field-of-view imaging across the complete VIS-SWIR spectrum using a single sensor. Our method is built on the observation that distinct regions of the field of view reach focus at varying distances from the mirror. By capturing a minimal focal stack (2-4 images), we utilize a computational backend to recover a sharp, all-in-focus image. A key contribution of this work is SeidelConv, a novel, physics-inspired, spatially-varying point spread function (PSF) model designed to accurately characterize and correct the off-axis aberrations inherent in simple concave mirrors. We demonstrate the efficacy of our approach using a first-of-its-kind 50mm F/1 optical system equipped with a VIS-SWIR sensor. Our system produces sharp images across RGB, NIR, and SWIR wavelengths without requiring refocusing, revealing material details invisible within individual spectral bands. We further validate the scalability of our approach with a 100mm F/2 system optimized for long-range imaging.
Vishwanath Saragadam, Niki Nezakati, Amit Roy-Chowdhury +1
Light field (LF) image denoising is challenging due to the high-dimensional structure of LF data. While noise is independent across sub-aperture images, scene content exhibits strong cross-view correlations. We introduce VSANet, a view-aware sparse attention network for LF denoising. Specifically, we propose a view-aware sparse attention (VSA) block that represents the 4D LF feature map as a unified spatial-angular token space and performs cross-view aggregation via locality-sensitive hashing-based sparse attention. This enables global feature interactions with linear complexity, effectively exploiting LF correlations across views and spatial locations. In addition, we design a feature refinement (FR) block to emphasize informative features in spatial, angular, and epipolar subspaces. The VSA and FR blocks are integrated within a sequential attention refinement module, forming the core of VSANet. Experiments demonstrate VSANet outperforms stateof-the-art LF denoising methods.